Mesa Boogie

• 3 Channels: Clean, Lo Gain & Hi Gain
• Power: 50 W Class A/B
• Power amp tubes: 2 x EL34
• Preamp tubes: 6 x 12AX7 and 1 x 12AT7
• Bias Select Switch: EL34, 6V6 or 6L6 tubes
• Controls: Gain, Treble, Mid, Bass, Presence, Reverb & Master Volume
• CabClone Cabinet Simulator
• MIDI In/Thru/Out - 256 presets - serves channels 1, 2, 3, reverb, FX loop and solo
• Housing made of aluminium
• Dimensions: 244 x 578 x 264 mm
• Weight: 15.8 kg
• Footswitch included
• Made in USA

• Power: 800W @ 4 or 2Ω, 400W @ 8Ω
• Class D amplifier with 8/4 or 2Ω impedance switch for optimum adjustment
• Active / passive switch
• Preamp: Input gain with clip indicator (O.D. LED)
• Variable voicing controller: Flat to Vintage Scoop
• Active 4-Band EQ: +/- 12 dB for bass, low-mid, high-mid, treble
• Deep switch for extra-low-end bass boost and master volume
• Balanced XLR output with pre / post, line / mic and ground lift switches
• LEDs for protect and limit
• 2 Speaker Twist outputs
• Dimensions (H x W x D): 8 x 27 x 29 cm
• Weight: approx. 2.5 kg
• Incl. gigbag and strap
• Made in USA

• Wide version (Widebody)
• Equipment: 1x 12" C90 speaker
• Open Back
• Power handling: 90 W
• Impedance: 8 Ohm
• Connections: 2 jack inputs, parallel output
• Dimensions (W x H x D) approximately: 58 x 42 x 28 cm
• Weight: 15 kg
• Made in the USA

• Full-tube
• Power: 23 Watt
• 2 Independent switchable channels - each with 3 modes
• Tube equipment: 2x 6V6, 5x 12AX7
• Fixed bias
• Channels 1 and 2 each with controls for clean, drive & hi modes, gain, treble, mid, bass, presence
• Reverb & master control
• Vintage All-Tube, Long-Tank, Spring Reverb per channel
• Tube FX loop
• External reverb foot switch output
• Dimensions (H x W x D): 21.90 x 47.78 x 24.13 cm
• Weight: 8.20 kg
• Includes protective cover and 1-fold foot switch for channel switching
• Made in Petaluma, USA

• Power: 35 / 25 / 10 W, switchable
• 2 Channels
• Power tubes: 4x EL84
• Preamp tubes: 6x 12AX7
• Channel 1: Clean, Fat or Crunch mode with multiwatt power switch (10 / 25 / 35 W), Gain, Treble, Mid / Boost, Bass, Presence, Reverb (rear side), Master and footswitchable Solo control
• Channel 2: Legendary Mark IIC+, Mark IV, and Xtreme modes with multiwatt power switch (10 / 25 / 35 W), Treble, Middle, Bass, Presence, Reverb (rear side), Master, independent Gain, and footswitchable Solo control
• 5-Band graphic EQ
• Channels 1 + 2 are separately selectable and footswitchable
• Spring reverb: Channels 1 + 2, separately selectable and adjustable (rear side)
• FX loop
• Built-in CabClone speaker simulation (closed-back / open-back / vintage), with integrated load resistor and headphone output
• Speaker on / off and Ground Lift switch
• Dimensions (H x W x D): 23.5 x 48 x 28 cm
• Weight: 12.5 kg
• 4-Way footswitch and cover included
• Made in USA

• All-tube
• 2 Independent switchable channels - each with 3 modes
• Power: Switchable 50/25 Watt
• Loudspeaker equipment: 1x12" Celestion Custom 90
• Tube equipment: 2x 6L6 and 5x 12AX7
• Fixed bias
• 2 Channels each with controls for clean, drive & hi modes, gain, treble, mid, bass, presence, reverb & master control
• Vintage all-tube, long-tank, spring reverb per channel
• Tube FX loop
• External reverb foot switch output
• Dimensions (H x W x D): 54.40 x 57.79 x 25.72 cm
• Weight: 20.4 kg
• Includes protective cover and 1-fold foot switch for channel switching
• Made in Petaluma USA

• John Petrucci Signature Model
• All-tube
• 3 Channels with five modes
• Power: Class A / B circuit, 100 / 60 W
• 4x 6L6 power tubes
• 5x 12AX7 preamp tubes
• 2x 5-Band graphic EQs - both can be assigned to either a footswitch or a channel
• All-tube spring reverb: Channel 1 + 2 + 3 can be set separately (rear side), and are footswitchable
• All-tube FX loop: Tube buffered and MIDI switchable
• Built-in CABCLONE cabinet simulator with integrated load resistance and headphone output
• Speaker on / off and ground lift switch
• MIDI controllable / programmable
• Slave Out
• Aluminium chassis
• Dimensions (H x W x D): Approx. 24 x 48 x 28 cm
• Weight: 18.5 kg
• Includes a new 3 x 3, 6-button footswitch and cover
• Made in the USA

Channel 1:

• Mark IIC+ Clean
• Independent Gain, Treble, Mid / Boost, Bass, Presence, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

Channel 2:

• Legendary Mark IIC+ Lead or Shred mode
• Independent gain with pull function: Gain Boost, Treble, Middle, Bass, Presence with pull function: Frequency Shift, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

Channel 3:

• Legendary Mark IIC+ Lead or Shred mode
• Independent gain with pull function: Gain Boost, Treble, Middle, Bass, Presence with pull function: Frequency Shift, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

• Equipped with: 2x 10" Custom Subway neodymium loudspeaker and adjustable high-frequency horn
• Rated power: 600 watts
• Light weight housing made of Italian poplar plywood
• Impedance: 8 Ohm
• Tri-port bass reflex opening
• Black Bronco cover with black metal grille
• Lexan plastic corners
• Slip cover
• Dimensions (H x W x D): 53.5 x 50 x 47.5 cm
• Weight: approx. 19.50 kg
• Made in USA

• Equipped with: 1 x 12" Celestion 90 speaker
• Rated power: 90 W
• Impedance: 8 Ohm
• Dimensions (H x W x D): 400 x 480 x 324 mm
• Weight: 16.35 kg
• Made in USA

• Rectifier, standard
• Equipped with 4x 12" Celestion Vintage 30 speakers
• Power rating: 240 W
• Impedance: 8 Ohm mono / 4 Ohm stereo
• Oversized slanted design
• Includes Track-Loc casters
• Manufactured in the USA

• Equipped with: 4x 10" Subway Neodymium speakers with adjustable tweeter
• Power rating: 1200 Watts RMS
• Frequency range: 41.3 - 12,000 Hz
• Impedance: 4 Ohm
• Dimensions (H x W x D): 62 x 61 x 44.5 cm
• Weight: Approx. 25 kg
• Made in USA

• Closed construction
• Equipped with 4 x 12" V30 speakers
• Rated power: 240 W
• Impedance: 8 Ohm mono / 4 Ohm stereo
• 1 Parallel output
• Dimensions (H x W x D): 77 x 76 x 36.5 cm
• Weight: 45 kg
• Housing cover: Black Taurus
• Grille: Black
• Includes a cover and casters
• Manufactured in the USA

• Recording Amp
• 2 Channels
• Power: 10/25 W (switchable)
• Power amp tubes: 2x EL84
• Preamp tubes: 6x 12AX7
• Channel 1: Clean, fat and crunch mode with multi-Watt power switch
• Controls: Gain, Treble, Mid/Boost, Bass, Presence, Reverb and Master
• Channel 2: Mark IIC+ mode, Mark IV mode and Xtreme mode with multi-Watt power switch
• Controls: Gain, Treble, Middle, Bass Presence, Reverb and Master
• 5-Band graphic EQ
• Mesa Dyna-Watt technology
• Built-in CabClone: Speaker simulation (closed/opened) with integrated load resistor
• Headphone output
• Speaker on/off
• Ground-Lift switch
• Spring reverb separately adjustable for each channel
• Tube-buffered FX loop
• Footswitch connector (channel & EQ)
• Dimensions (H x W x D): 203 x 355 x 221 mm
• Weight: 7.5 kg
• Includes footswitch and cover
• Made in USA

• Equipped with: 1x 15" custom subway neodymium speaker with adjustable tweeter
• Rated power: 400 W RMS
• Impedance: 8 Ω
• Tri-port bass reflex port
• Black bronco cover with black metal grill
• Lexan plastic corners
• Slip cover
• Material: poplar plywood
• Dimensions (H x W x D): 50 x 49 x 45.5 cm
• Weight: approx. 17.5 kg
• Made in USA

• Power: 800 W @ 4 or 2 Ohm, 400W @ 8 Ohm
• Class D power amp with 8, 4 or 2 Ohm impedance switches for optimum adjustment
• Active / passive selector switch
• Play / Mute selector switch with connection for foot switch
• Input Gain with Clip Indicator (O.D. LED)
• Highpass filter
• Variable Voicing control (flat to vintage scoop)
• Active 4-band EQ (+/- 12 db for bass, low-mid, high-mid, treble) with variable low-mid (150-1800 Hz) & high-mid (300-5000 Hz) controllers
• Deep Switch for extra low-end
• Bright Switch for extra high-end & master volume
• Balanced XLR output with pre / post, line / mic and ground lift switches
• Serial FX loop
• Tuner output on the back
• Mute foot switch
• Headphone output
• AUX In
• LED Indicators for Protect and Limit
• 2 Speaker Twist outputs
• Weight: 2.85 kg
• Dimensions (H x W x D): 8 x 34 x 26 cm
• Includes gig bag with carrying strap
• Made in USA

• 3 Channels: Clean, Lo Gain & Hi Gain
• Multi-Soak power adjustment with five power options per channel for 3, 7, 20, 50 or 100 Watt Class A/B power
• Power tubes: 4x EL34
• Preamp tubes: 6x 12AX7 & 1x 12AT7
• Bias select switch: EL34, 6V6 or 6L6 tubes
• Controls: Gain, Treble, Mid, Bass, Presence, Reverb & Master Volume
• CabClone Cabinet Simulator
• MIDI In/Thru/Out - 256 Presets - Operates channels 1, 2, 3, Reverb, FX Loop & Solo
• Aluminium housing
• Dimensions: 244 x 578 x 264 mm
• Weight: 20.7 kg
• Includes footswitch
• Made in USA

• Power: 800 W @ 4 or 2 ohms, 400 W @ 8 ohms
• Power amplifier with 8/4 or 2 ohm impedance switch for optimum adaptation
• Preamp 2-stage tube amp Class A / 1 x Mesa 12AT7
• EQ / dynamics control: variable high-pass filter (25-125Hz)
• Active 5-band EQ (+/- 12 db for bass, low-mid, high-mid, treble)
• Selectable from 80-1000 Hz, 150-2.5000 Hz or 300-5000 Hz and a passive Mid Control
• USB network output
• Headphone output
• Auxiliary input
• Weight: Approximately 3.2 kg
• Dimensions (H x W x D): 10.2 x 30.5 x 28.9 cm
• Made in USA

• All-tube
• 2 Independent switchable channels - each with 3 modes
• Power: 40/20 Watt switchable
• Fixed bias
• Tubes: 2x 6L6, 5x 12AX7
• Channel 1 and 2 with controls for Clean, Drive & Hi Modes, Gain, Treble, Mid, Bass, Presence, Reverb & Master Control
• Vintage All-Tube, Long Tank, Spring Reverb on each channel
• Tube FX Loop
• External reverb footswitch output
• Dimensions: (H x W x D): 24.77 x 57.79 x 24.13 cm
• Weight: 11.79 kg
• Includes protective cover and 1-way footswitch for channel switching
• Made in Petaluma USA

• Compact and light
• Channels: 2; Power: 800 watts @ 4 and 2 ohms
• Preamp tubes: 3x 12AT7
• Controls: 2x Gain, Highpass (2x), Bass (2x), Mid (2x), Mid Freq (2x), Treble (2x), Volume (2x), O / D Symmetry
• Switch: Mute / Play, High / Low Gain, Deep, Bright, Channel Select, Power, Speaker Impedance, 2x Level Line / Mic, 2x Ground / Lift
• Loop-in path effect: Yes
• Connections: Input (6.3 mm jack), headphones (6.3 mm stereo jack), footswitch (6.3 mm jack), FX loops (2x send, 2x return) (6.3 mm jack), Aux In (6 , 3 mm jack), tuner output (6.3 mm), direct out (2x XLR), USB motto PWR; Dimensions (W x D x H): 305 x 258 x 88 mm
• Weight: 3.2 kg
• Made in the USA

• Speakers: 2x 12" Celestion Custom 90
• Power rating: 180 W
• Impedance: 8 Ohm
• Input and output: 2x 6.3 mm Jack
• Open housing design
• Rear-loaded
• Dimensions (W x H x D): 679 x 461 x 257 mm
• Weight: 20.9 kg
• Colour: Black
• Includes a protective cover
• Made in the USA