Mutec

• Based on MUTEC 1G-clock technology
• Improves the audio quality of all connected digital audio devices
• Strongest re-clocking of digital audio signals
• Audibly increases the sound quality of each DA converter
• Prevents digital "clicks and pops" in audio recordings
• Digitally compensated clock accuracy for the highest precision of the generated clock signals
• Locks to 10 MHz clock signals of so-called Atomic clocks or GPS receivers
• Outputs clock signals fail-safe in any state of operation
• Generates Word Clocks, Super Clocks, AES3 + S/P-DIF blanks simultaneously
• Converts between AES3 and S/P-DIF as well as between AES11 and Word Clock
• Generates Word Clocks up to 768.0 kHz simultaneously
• Control elements can be switched off to prevent accidental operation
• Anodised 9.5" aluminium housing
• Dimensions: 196 x 42 x 156 mm
• Weight: 1260 g
• Built-in international power supply unit
• Colour of front panel: Silver

Interfaces:

• 1 x BNC input for Word Clock + 10 MHz, 75 Ohms termination switchable, unbalanced
• 1 x XLR input for AES3/11, 110 Ohms terminated, transformer balanced
• 1 x Optical input for S/P-DIF, Toshiba Toslink™, EIAJ RC-5720
• 1 x RCA input (coaxial) for S/P-DIF, 75 Ohms terminated, unbalanced
• 6 x BNC outputs for Word Clock, terminated, unbalanced, individually buffered, adjustable in pairs
• 1 X XLR output for AES3/11, terminated, transformer balanced buffered
• 1 X RCA output (coaxial) for S/P-DIF terminated, unbalanced, buffered
• 1 X Optical output for S/P-DIF, Toshiba Toslink, EIAJ RC-5720

MC-2 comes basically as an AES/EBU distribution amplifier. Additonally AES/EBU ID interfaces are available to offer conversions between both interface standards. Using latest PLL and conversion techniques, MC-2 processes digital audio signals aligned to AES3 and AES3 ID and reference sync signals aligned to AES11 and AES11 ID including all usual clock rates from 32 kHz to 192 kHz. Each interface standard offers one input whereas AES/EBU can be distributed to 6 outputs and AES/EBU ID to 2 outputs.

Various operation modes enable the use of MC-2 in a wide range of applications. An input reference signal will be distributed to all outputs simultaneously. In this process, a conversion between the AES/EBU and the AES/EBU ID interfaces will be done automatically.

A supplied AES3 digital audio signal can be converted in realtime into an AES11 digital sync signal and distributed through all outputs. To keep the original AES3 signal for further use, the first output of the according interface standard can be switched to pass the original signal separately without any format changes.

The voltage of the outputs of the AES/EBU ID interface can be switched from standard 1V to 3V to enable very long cable runs.

MC-2 is mountable in a 19" rack system by using our optional rack adapters. All functions can be set convenient from the front panel with help of a simple user interface. The device is shipped in a rugged aluminium housing and meets CE, UL and FCC, part 15, specifications.

• AES / EBU and AES / EBU ID interfaces in one device
• Supports all audio-reated clock frequencies between 32 kHz and 192.0 kHz
• All interfaces conform to the AES and AES-ID standards
• Signal improvement by low jitter PLLs
• Converted from AES3 to AES11
• Frequency display of all audio-relevant clock frequencies between 32 kHz and 192.0 kHz
• Reference-Pass functionality
• Input lock detection and display
• Simple user interface
• Built-in, internationally useable power supply

• Reference clock generator
• High precision 10 MHz clock signals with low phase noise (jitter)
• Outputs can be used in parallel with 50 and 75 Ohm for maximum compatibility with DACs and clock distributors of various manufacturers
• 8 Galvanically isolated, individually switchable outputs
• Colour: Black

• MUTEC 1G Clock technology and REVIVE re-clocking of the latest generation
• Audiophile, asynchronous 2-channel USB interface with ultra low noise audio clock oscillators and galvanic insulation to prevent HF interference
• Effective network filtering and low noise
• Multi-stage power supply
• Regenerates and audibly improves the audio quality of USB audio and DSD/DoP streams as well as connected devices
• Offers unique, externally referenced re-clocking
• Synchronises with rubidium/cesium atomic clocks or GPS receivers
• Works as a flexible digital switch matrix
• Audio Format Converter and Master Clock
• Converts between USB-PCM audio, USB DSD/DoP audio, AES3 and S/P-DIF as well as AES11 and Word Clock
• Ultra-low jitter word clock generation with clock rates up to 1,536.0 kHz
• Synchronises with rubidium (10 MHz), cesium (5 MHz) and GPS clock references
• Outputs clock signals fail-safe in any state of operation
• Update capability via USB interface
• Compatible with Apple Macintosh and Windows PC
• Built-in international power supply unit
• Space saving 9.5" housing
• Suitable for rack mounting
• Dimensions: 196 x 42 x 156 mm
• Weight: 1350 g
• Colour: Silver

• MUTEC 1G Clock technology and REVIVE re-clocking of the latest generation
• Audiophile, asynchronous 2-channel USB interface with ultra low noise audio clock oscillators and galvanic insulation to prevent HF interference
• Effective network filtering and low noise
• Multi-stage power supply
• Regenerates and audibly improves the audio quality of USB audio and DSD/DoP streams as well as connected devices
• Offers unique, externally-referenced Re-Clocking
• Synchronises with rubidium/cesium atomic clocks or GPS receivers
• Works as a flexible digital switching matrix, audio format converter and master clock
• Converts between USB-PCM audio, USB DSD/DoP audio, AES3 and S/P-DIF and AES11 and Word Clock
• Ultra-low jitter word clock generation with clock rates up to 1,536.0 kHz
• Synchronises with rubidium (10 MHz), cesium (5 MHz) and GPS clock references
• Outputs clock signals fail-safe in any state of operation
• Update capability via USB interface
• Compatible with Apple Macintosh and Windows PC
• Built-in international power supply unit
• Space saving 9.5" housing
• Rack mountable
• Dimensions: 196 x 42 x 156 mm
• Weight: 1350 g
• Colour: Black

• Based on MUTEC 1G clock technology
• Improves the audio quality of all connected digital audio equipment
• Most aggressive re-clocking digital audio signals
• Increases audibly the sound quality of each DA converter
• Prevents digital "clicks and pops" in audio recordings
• Digitally-compensated clock accuracy for the highest precision of generated clock signals
• Locks to 10 MHz clock signals of so-called Atomic clocks or GPS receivers
• Outputs clock signals are fail-safe in any state of operation
• Generates Word Clock, Super Clock, AES11- and S/P-DIF reference clocks simultaneously
• Converts between AES3 and S/P-DIF, as well as between AES11 and Word Clock
• Generates Word Clock rates up to 768.0 kHz
• Controls can be switched off to prevent accidental operation
• 1x BNC input for Word Clock + 10 MHz, 75 ohm termination, switchable, unbalanced
• 1x XLR input for AES3/11, 110 ohm termination, transformer balanced
• 1x Optical input for S/PDIF, Toshiba Toslink , EIAJ RC-5720
• 1x RCA input (coaxial) for S/PDIF, 75 ohm termination, unbalanced
• 6x BNC output for Word Clock, terminated, unbalanced, individually buffered, adjustable in pairs
• 1x XLR output for AES3/11, terminated, transformer balanced, buffered
• 1x RCA output (coaxial) for S/P-DIF, terminated, unbalanced, buffered
• 1x Optical output for S/PDIF, Toshiba Toslink™, EIAJ RC-5720
• 9.5" Anodized aluminium housing
• Dimensions: 196 x 42 x 156 mm
• Weight: 1260 g
• Built-in, usable internationally power supply
• Colour of the front panel: Black

• Reference clock generator
• High precision 10 MHz clock signals with low phase noise (jitter)
• Outputs can be used in parallel with 50 and 75 Ohm for maximum compatibility with DACs and clock distributors of various manufacturers
• 8 Galvanically isolated, individually switchable outputs
• Colour: Silver

• For AES3, AES3id and S / P DIF signals
• AES / EBU, AES / EBUid and S / P DIF interfaces
• Format and sample rate conversions of 32.0-192.0 kHz for all formats
• Separate AES11 reference clock input
• Independently and bidirectionally converts different clock rates: X-SRC
• 4-channel sampling rate converter (SRC) section for bidirectional conversions
• Internal flash memory
• Design: 9.5 "housing
• With built-in power supply

• AES / EBU, AES / EBUid, and S / P DIF (optical / coaxial) interfaces in one device
• Uni- and bi-directional format conversions up to 192.0 kHz
• Signal improvement by low-jitter PLLs
• Converts to all output formats at the same time
• Operates as an active signal splitter for AES3 / AES3id and S / P-DIF
• Every interface standard offers two separately buffered outputs
• Detects NONE-PCM and DTS streams
• SCMS processing and status analysis
• User's settings will be stored after switching-off
• Redesigned, simplified user interface
• Built-in, internationally usable power supply
• Dimensions (W x H x D): 198 x 42 x 161 mm
• Weight: 650 g