MXR

Together with the decent phase 90, which was only equipped with a speed controller, the phase 100 is probably THE vintage phaser effect. The classic phasing sounds of the 70s are not a problem, but Eddie Van Halen liked to "spice" his legendary lead sound - especially on the early records - with an MXR phaser

The MXR 100 can be used with a rotary switch to set different waveforms, which allows for more spectacular and modern phasing sounds.

• 4-Way rotary switch
• 4 Different intensity levels selectable via 4-way rotary switch
• Can be operated via a power supply or with a 9V battery
• Status LED

Bundle offer comprising

• Effects Pedal
• Analog delay
• Up to 600 ms delay time
• Analog signal path
• True Bypass
• Controls for Delay, Regen and Mix
• Foot switch from metal
• Sturdy metal housing
• Runs on 9 V battery or via the Dunlop ECB-003 AC adapter (not included)

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

• Overdrive / Distortion
• Offers a wide range of clear, transparent overdrive sounds
• For boost with tone colouration up to 'blown-tube' distortion
• Integrated charge pump for more headroom
• Selectable bypass (True / Buffered)
• Volume, Tone and Drive controls
• Buffer switch
• Bypass footswitch
• Status LEDs
• Metal housing
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply via 9V DC power supply (Dunlop ECB 003) with 2.1 mm x 5.5 mm barrel connector, polarity (-) inside - power supply not included in the delivery
• Power consumption: 18.5 mA
• Dimensions (L x W x H): 90 x 40 x 55 mm
• Weight: 130 g

Note: Battery operation not supported.

• Graphical 6-band equalizer
• / -18 dB boost or cut per frequency band
• Illuminated sliders (status LEDs)
• Low noise
• True Bypass
• Regulator for 100 Hz, 200 Hz, 400 Hz, 800 Hz, 1.6 kHz and 3.2 kHz
• Aluminum housing
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)
• Power consumption: 14.5 mA
• Dimensions (L x W x H): 110 x 60 x 50 mm
• Weight: 350 g

• External footswitch for Tap Delay effect pedals
• Compatible with a variety of effect pedals
• 6.3 mm TRS Tap Tempo output
• 3 internal DIP switches for TRS adjustment of the output socket
• Metal housing

Bundle offer comprising

• Effects PedalThe MXR Distortion was one of the first sensible-sounding Distortions in the early 70's and to this day sounds good for many types of sound.

But modern times will not make the MXR redundant, and so the MXR Distortion M116 Fullbore Metal is a (if required) metallic-sounding knallhartes Metal Distortion unit with which you can make guitar sounds glow.

At the heart of the pedal is the sweepable mid control. Here the lava frequency can be searched for and mercilessly boosted; but of course tamer frequencies can also be selected (lowering works as well). The Fullbore Metal is therefore also versatile in all kinds of healthy hardness.

• Metal Distortion
• EQ controller with Bass, Mid, sweepable Mid-Freq and Treble head
• Volume and gain control
• Power supply via a 9 V battery (Article 132579) or 9 V power supply (Article 409939) (both not included)

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

• Compressor
• Classic sound with modern features
• Equipped with the rare CA3080 metal can IC
• Low-noise operation
• High-transparency and increased dynamic bandwidth
• Clean aperture for parallel compression
• 2 Attack settings
• True Bypass
• Controls for Tone, Sensitivity, Output and Clean
• Attack switch to choose between fast and slow attack
• Status LEDs
• Metal casing
• 6.3 mm Mono jack input/output
• Power supply with 9 V battery or 9 V DC (Dunlop ECB003) power supply (power supply not included) 2.1 mm x 5.5 mm hollow plug and polarity (-) inside
• Current consumption: 11 mA
• Dimensions (W x D x H): 112 x 60 x 52 mm
• Weight: 310 g

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Bundle offer comprising

• Effects Pedal
• Analog delay
• Up to 600 ms delay time
• Analog signal path
• True Bypass
• Controls for Delay, Regen and Mix
• Foot switch from metal
• Sturdy metal housing
• Runs on 9 V battery or via the Dunlop ECB-003 AC adapter (not included)

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 51 x 102 mm
• Protects effect pedals from dirt and weather influences
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes QuickMount pedal mounting plate type A for RockBoard pedalboards and spare screws

Bundle offer comprising

• Effect Pedal
• Compressor pedal for electric bass
• CHT "Constant headroom technology" for clean and clear sound quality
• Knobs for output, input, release, attack and ratio
• LED chain with 10 LED for "gain reduction" display
• Status LED
• True bypass
• Sturdy metal housing
• Operated with 9 V battery or Dunlop ECB-003 AC adapter (sold separately, not included here)

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 51 x 102 mm
• Protects effect pedals from dirt and weather influences
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes QuickMount pedal mounting plate type A for RockBoard pedalboards and spare screws

Bundle offer comprising

• Flanger Effect

A classic effect from the later 70s is definitely one of the big three of the great art of flanging, because this one - in contrast to cheaper competing products - "really flanges". Adjustable in Speed, Width, Regeneration (= feedback) and Manual (= delay time), and with that, everything that sounds good is possible: From chorus-like floating sounds to the jet plane - it has everything.

But what always resonates is the warmth of the sounds, which can not be recreated by any digital all-rounder. Those who like genuinely nice, classic flanging sounds will find it hard to look past this one.

• "Sweep and Flange sounds" of the 70s
• Controls: Manual, Width, Speed, Regeneration
• LED status display
• Power adapter included

Note: Register your product at www.w-distribution.com/Warranty to extend the warranty to 4 years.

• Protective Cover
• Suitable for Electro Harmonix, Keeley Electronics, MXR and many other pedals with large, horizontal housings and a configuration with two rows of pots
• Fits most effect pedals with housing dimensions of approx. 94 x 125 x 37 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 110 x 78-83 mm
• Protects effect pedals from dirt and weather influences
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes QuickMount pedal mounting plate Type D for RockBoard pedalboards, spare screws and shim plate for easy lifting of pedals

• Compressor pedal for electric bass
• CHT "Constant headroom technology" for clean and clear sound quality
• Knobs for output, input, release, attack and ratio
• LED chain with 10 LED for "gain reduction" display
• Status LED
• True bypass
• Sturdy metal housing
• Operated with 9 V battery or Dunlop ECB-003 AC adapter (sold separately, not included here)

• Separate controls for input and output
• Parametric mids
• Pre / Post switch determines whether the EQ will take effect before or after the Direct Out
• Controls for Output, Mid Freq., Input, Bass, Mid and Treble
• Pressure switch for ground lift
• 2 Internal switches control the use of the Direct Out and a True Bypass can be switched
• Status LED
• 6.3 mm Jack inputs and output
• XLR output
• Operates on 9V battery or optional AC adapter (article nr 409939, not included)

Bundle offer comprising

• Effects Pedal
• Analogue delay
• Carbon Copy / Carbon Copy Bright switchable
• Controls: True Bypass, Delay, Rain and Mix
• Internal trim pots for width and speed
• Mod switch for activating the modulation
• Bright switch to choose between Original and Bright Mode Bypass Footswitch
• 6.3 mm Mono jack input / output
• Mini housing format
• Status LEDs
• Power supply connection: Barrel connector 2.1 x 5.5 mm (negative polarity inside)
• Power supply via 9 V DC mains adapter (not included in delivery)
• Power consumption: 26 mA
• Dimensions (W x D x H): 40 x 90 x 55 mm
• Weight: 130 g
• Includes power supply

Note: Battery operation is not supported.

• Protective Cover
• Suitable for MXR, Pigtronix, Xotic, XVive and many more pedals with miniature housing
• Suitable for most effect pedals with a housing size around 94 x 37 x 37 mm
• Offset of mounting holes (W x D): 29 x 72 - 82 mm
• Protects effect pedals from dirt and weather conditions
• Protects the settings from unintentionally shifting
• Mounts effect pedals securely on almost all pedal boards
• No permanent modifications required
• Includes universal pedal mounting plate type L, silicone adhesive pad, replacement screws, and shim plate (for lifting the pedal slightly)

• For E-Bass
• Classic Analog envelope filter sounds
• True bypass
• Controller for Dry, FX, Decay, Q and Sens.

Bundle offer comprising

• Effects pedal for electric guitar
• Overdrive
• Eddie Van Halen signature model
• Controls for output, bass, mids, treble, gain, and a gate control that can be activated
• Input: 6.3 mm Jack mono
• Output: 6.3 mm Jack mono
• Solid metal housing
• Status LED
• Powered via a 9V battery or 9V power supply (not included, e.g. Article Nr 409939)
• Dimensions (W x D x H): 122 x 91 x 52 mm
• Weight: 809 g

• Protective Cover
• Suitable for Electro Harmonix, Keeley Electronics, MXR and many other pedals with large, horizontal housings and a configuration with two rows of pots
• Fits most effect pedals with housing dimensions of approx. 94 x 125 x 37 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 110 x 78-83 mm
• Protects effect pedals from dirt and weather influences
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes QuickMount pedal mounting plate Type D for RockBoard pedalboards, spare screws and shim plate for easy lifting of pedals

• Phaser
• Phase 45 (2-stage) and Phase 90 (4-stage) circuits in mini pedal format
• Two switchable phaser styles (vintage / modern)
• True bypass
• Speed control
• Script switch to activate script mode for more subtle phasing
• 45/90 switch to select between Phase 45 and Phase 90 mode
• Bypass footswitch
• Status LEDs
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply via 9 V DC power supply (Dunlop ECB 003, not included) with 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Power consumption: 8 mA
• Metal housing
• Dimensions (L x W x H): 90 x 40 x 55 mm
• Weight: approx. 130 g

Note: Battery operation is not supported.

• Analog delay
• Up to 600 ms delay time
• Analog signal path
• True Bypass
• Controls for Delay, Regen and Mix
• Foot switch from metal
• Sturdy metal housing
• Runs on 9 V battery or via the Dunlop ECB-003 AC adapter (not included)

The MXR Vintage Phase 90 comes in the classic script logo design. This is how Eddie Van Halen "spiced up" his legendary Lead sound, especially on the early records. This can clearly be heard in his parade solo on "eruption". In contrast to the popular block logo phaser, the original circuit was used here, and so the phaser sounds just like Eddie, Jimmy Page, and David Gilmour (All I can say is: "Shine On ...").

There is, of course, only one control with which the speed of the phasing can be adjusted, everything else is set so that a really pleasant, never too loud effect can be achieved. Phasers just like the classics - beam me up Scotty!

• Design based on the cult pedal phaser
• Speed controllable
• 1/4 "jack In / Out
• Can be operated with a 9V battery or a separate power unit (not included) available under Article Nr 409939
• LED indicates the switching status