Neumann

Bundle offer comprising

• Vocal Microphone

The KMS 105 is developed to optimally transmit the human voice making it the first choice for demanding live applications. Due to the low inherent noise, crosstalk behavior that is free of colouration and the supercardioid characteristics, KMS-105 is ideal for a solo singer on stage. Popping, wind and handling noise are largely avoided through an innovative filter. High acoustic resolution and linear frequency response ensure that KMS-105 provides the musician an optimum control over singing and speaking on stage at any time.

• Condenser microphone
• The Neumann sound for stage
• High transparency in speaking and singing
• Transformerless circuit
• Supercardioid characteristics reduces feedback
• Crosstalk performance free of colouration
• Weight: 350 g
• Length: 180 mm
• Colour: Black
• Incl. microphone clamp

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• Special edition limited to 500 pieces
• Capsule design based on the legendary U 87
• Cardioid pattern
• Frequency response: 20 - 20,000 Hz
• Transfer factor at 1 kHz at 1 kOhm: 23 mV/Pa
• Nominal impedance: 50 Ohm
• Supply voltage (P48, IEC 61938): 48 V
• Weight: 450 g
• Incl. elastic mount EA4 BK, one pair of black gloves and aluminium case

• Sennheiser/Neumann capsule for 2000/6000/9000, EW G4 300/500 and EW-D
• Polar pattern: Cardioid
• Very low transmission of grip and plop noises
• Colour: Black

• For O 410
• Colour: Black (RAL 9005)

• Cardioid
• Pressure gradient transducer
• Successor of KM 84
• Very smooth frequency responses not only for the 0° axis, but also for lateral (off-axis) sound incidence.
• Frequency response: 20-20000 Hz
• Nominal Impedance: 50 Ohm
• Rated load impedance: 1000 ohms
• Max. output voltage 2540 mV
• Weight: 80 g
• Diameter: 22 mm
• Length: 107 mm
• Includes WNS 100 windscreen and SG 21/17 stand mount swivel

Bundle offer comprising

• Microphone Stereo Set
• 2x Smal condenser microphones KM 184 (with continual serial number)
• Cardioid
• 2x WNS 100 Windscreen
• 2x SG 21 Stand joint
• Colour: Matte black

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• 2 Condenser miniature microphones KM 183
• Polar pattern: Hypercardioid
• Frequency range 20 Hz ... 20 kHz
• Open circuit voltage: 1 kHz at 1 kOhm: 10 mV/Pa ± 1 dB
• Sensitivity 12mV/Pa
• Required phantom power 48 V +/- 4 V
• Sound pressure level for k
• Equivalent noise level
• A-weighted: 15 dB-A
• Weight: each approx. 80 g
• Incl. 2 x WNS 100 windshields and 2x SG 21 stand joints
• Dimensions per microphone (length x diameter): 107 x 22 mm
• Colour: Black

• Ideal for DECCA Tree recordings and surround microphone
• Pressure receiver capsule with 12 mm titanium diaphragm
• Unique directivity: In the range of low frequencies it offers a perfect omnidirectional polar pattern; in the middle and high frequency ranges, a narrower sound incidence angle is due to the special construction method
• 119 dB dynamic range
• Extremely low inherent noise level of 15 dB-A
• Frequency range: 20 - 20,000 Hz
• Weight: 800 g
• Included: EA 170 elastic suspension, N 149 A power supply, KT 8 connection cable, power cable and aluminium case

• Effective protection against popping sound, e.g. plosives, such as "p" or "t"
• Consists of a round, thin frame which is covered on both sides with black gauze
• Frame diameter: approx. 200 mm
• Clamp with a knurled screw
• Incl. approx. 30 cm long gooseneck

• With hypercardioid directional characteristic
• No phantom power required
• Pop-screen protection and elastic suspension are already integrated
• Frequency range: 20 Hz - 20 kHz
• Sensitivity: 1.7 mV / Pa = -55.4 dB ± 1 dB
• Impedance: 200 Ohm
• Equivalent noise level: 18 dB-A

• L-shaped adapter for wall mounting
• Colour: Black (RAL 9005)

• Polar pattern: cardioid
• Pressure gradient transducer
• Successor of KM 84
• Very smooth frequency responses not only for the 0° axis, but also for lateral (off-axis) sound incidence.
• Frequency response: 20-20000 Hz
• Nominal Impedance: 50 Ohm
• Rated load impedance: 1000 ohms
• Max. output voltage 2540 mV
• Weight: 80 g
• Diameter: 22 mm
• Length: 107 mm
• Includes windscreen and SG 21 stand mount swivel

• For close miking of instruments in low noise situations or rooms with good room acoustics.
• With its flat frequency response in the diffuse sound field ideal as stereo pairs in AB technique
• Baffle plate stereophonic
• Colour nickel
• Frequency range 20-20000 Hz
• Field transfer factor with 1 kHz at 1 kΩ 12/15/10 mV/Pa
• Nominal impedance 50 Ω
• Rated load impedance 1000 Ω
• Limit sound pressure level for K
• Maximum output voltage 10 dBu
• Supply voltage 48 V ± 4 V
• Current consumption: 3.2 mA
• Acoustical operating principle
• Polar-pattern: Omni-directional
• With consecutive serial number
• Diameter: 22 mm
• Length: 107 mm
• Weight 80 g
• Incl. 2x WNS 100 windscreens and 2x SG 21 tripod joints

The reversible microphone U 87 Ai is the successor model of the U 87 i, the most well-known and most widely used microphone of the fet 80 series, which is improved in its technical values. The changes concern the increased output voltage and the reduced equivalent noise level. Both measures contribute to a remarkable improvement in recording quality. The microphone is used in the studios for orchestral recording as the main microphone, it is used as a support microphone for individual instruments use. When transmitting big-bands and when recording instrumental and vocal soloists, but also in such difficult tasks as the production of a radio play U 87 Ai is used with its many possibilities.

With three switches on the capsule head, the three directional characteristics omni, cardioid and figure-8, adjust low-frequency response and 10-dB pre-attenuation.

• Colour: Black
• Polar patterns: Omni, cardioid, figure-8
• Switchable 10 db damping
• Acoustic operation: pressure gradient receiver
• Transmission range 20-20000 Hz
• Field operating factor: 22/28/20 mV / Pa
• Nominal impedance 200 ohms
• Spare noise level DIN 45 405 dB 26/23/25
• Noise level difference to 1 Pa CCIR 68/71 / 69dB
• Boundary sound pressure level for 0.5% total harmonic distortion 117 dB (with pre-attenuation 127dB)
• Dynamic range of the microphone amplifier: 115 dB
• Current consumption: 0.8 mA
• Weight: 500 g
• Diameter: 56 mm, length: 200 mm
• Universally applicable: vocals, speakers, overheads, winds
• Note: no tripod mount or elastic suspension included (optional accessories available under Art. 189268 & 218556)

• For vertical positioning of a loudspeaker suspended from the ceiling
• Colour: Black (RAL 9005)

• Colour: Nickel

• 24-Bit 48 kHz signal processing
• Equipped with: 4" woofer 1" tweeter
• Frequency response (+/- 3 dB): 57 Hz - 21 kHz
• Maximum output level: 108.8 dB SPL
• Power: 90 W woofer and 50 W tweeter
• Control panel for standby and acoustical control
• Electronic peak /thermo limiter protection circuit separately for woofer and tweeter
• Input / output level control
• Linear phase DSP crossover 8th order
• External 4-position acoustical controls for low-mid or internal automatic or manual room correction (Precision Alignment) with max. 8 IIR filters plus low / high shelf global filter balance
• 70-ms delay function for time and lipsync settings
• Self-generated noise
• Input: balanced XLR, magnetically shielded
• Network connection
• 2 x M6 threaded inserts for stands/mounts
• Dimensions (H x W x D): 233 x 154 x 194 mm
• Weight: 3.5 kg