Neumann

• Pressure gradient transducer
• Polar pattern: Cardioid
• Frequency response: 40 - 16,000 Hz
• Sensitivity at 1 kHz into 1 kOhm: 8 mV / Pa
• Rated impedance: 150 Ohm
• Rated load impedance: 1 kOhm
• Equivalent noise level, CCIR: 25 dB
• Equivalent noise level, A-weighted: 18 dB-A
• Signal-to-noise ratio, CCIR (rel. 94 dB SPL.): 69 dB
• Signal-to-noise ratio, A-rated (rel. 94 dB SPL.): 76 dB
• SPL for THD
• With preattenuation: 147 dB
• Maximum output voltage for THD
• Requires 48 V phantom power
• XLR connector
• Weight: 710 g
• Diameter: 63 mm
• Length: 160 mm
• Incl. wooden case and certificate

Neumann WNS 110 black, Windscreen for KM100 and Series 180

• 2x Smal condenser microphones KM 184 (with continual serial number)
• Cardioid
• 2x WNS 100 Windscreen
• 2x SG 21 Stand joint
• Colour: Matte black

Bundle offer comprising

• Active Studio Subwoofer with DSP
• Equipped with: 10" Ultra long excursion woofer
• Power: 256 W
• Maximum SPL: 105.0 dB
• Frequency response: 18 - 750 Hz (+3 dB)
• 4 Different LFE modes selectable
• Crossover frequency: 80 Hz
• Acoustic control with 8 fully parametric filters via the Neumann.Control app
• FIR phase correction for the connected Neumann analogue monitors via the Neumann.Control app or optional MA 1
• Switchable stand-by mode
• Analogue inputs / outputs in XLR
• Digital inputs / outputs in BNC (75 Ohm, AES3)
• Optional control and configuration via the Neumann.Control iPad app
• Automatic calibration including the connected Neumann monitors via optional MA 1 software (MAC/PC)
• Dimensions: 383 x 330 x 383 mm
• Weight: 19.5 kg

• Automatic Monitor Alignment
• Calibration system for stereo setups with Neumann KH 80 DSP and all analog (non-DSP-based) Neumann monitors in connection with the KH 750 DSP subwoofer
• Calibration algorithms developed jointly with Fraunhofer IIS
• Individually calibrated measurement microphone
• Space-adaptive target curve
• Phase and amplitude optimization for analog Neumann monitors
• Frequency range: 20 - 20000 Hz
• Directional characteristic: Omnidirectional
• For Mac and PC
• Dimensions (length x diameter): 117 x 23 mm
• Weight: 37 g
• System requirements: Windows 10 (64 bit) or macOS 10.13 / 10.14 / 10.15, audio interface with balanced, analog input with 48 V phantom power and 2 balanced, analog outputs or digital AES3 output (only KH 750 DSP), ASIO driver (for Windows ), Network switch

• Characteristics: Hyper-Cardioid
• Acoustic operation: Pressure/Pressure gradient transducer
• Frequency range: 20-20,000 Hz
• Peak SPL: 142 dB
• Requires 48 V Phantom power
• Diameter: 22 mm
• Length: 107 mm
• Weight: approx. 80 g

• For the microphone U 89
• Swivel threaded connection with a 5/8" 27 threaded pitch
• Incl. reducer for connection with 1/2" u. 3/8" threaded pins

Bundle offer comprising

• Tube condenser microphone
• Pressure gradient transducer with the same large diaphragm capsule of the legendary U 47 and M 49
• Directional characteristics: cardioid
• Frequency range: 20 - 20,000 kHz
• Max. sound pressure level: 114 dB for K
• Max. 8 dBu output voltage
• Nominal impedance: 50 Ohm
• Nominal load impedance: 1 kOhm
• Dimensions (diameter x length): 57 x 142 mm
• Weight: 460g
• Incl. swivel mount, N 149 A universal power supply with mains cable and aluminium case

• Elastic Microphone Shock Mount
• For M147, TLM 103, TLM 193
• Colour: White

• PRO X 6, IS 62, O 198 and O 300 (D)
• Mounting bracket for wall or ceiling mounting, to connect the speakers and subwoofer to lightgirder / Truss and the essay on speaker and light stands
• Dimensions (HxWxD): 205 x 400 x 40 mm
• Weight: 1,1 kg
• Colour: Black (RAL 7021)

Additionally included:

• 2 Round handle screws M8x25
• 2 Allen screws M8x25
• 2 Washers - rubber
• 2 Washers - metal

Note: For a pair of speakers 2 pieces of this article are required

Bundle offer comprising

• Large diaphragm microphone
• With K67 capsule
• Switchable directional characteristics: Omni / Cardioid / Figure-8
• Switchable 10 dB pre-attenuation
• High pass filter
• Frequency response: 20 Hz - 20 kHz
• Requires 48V phantom power
• Pearl-grey surface
• Comes in a wooden case

Optional shock mount 125520 (not included)

• Shock Mount
• For the U 87 microphone
• Swivel mount with with 5/8"-27 thread
• Includes reducer for connecting to 1/2" and 3/8" thread studs
• Weight: 500 g

• For microphones with diametres between 21 and 24 mm
• Swivel threading connection 5/8"-27-speed
• Includes adapter for connection to 1/2" and 3/8" threads

• For TLM102
• Colour: Nickel

Includes:

• 2 x TLM 103 (mt) large diaphragm microphones with cardioid polar pattern
• 2x EA1 (mt) Microphone suspension
• 1x Aluminium case - suitable for 2 microphones and 2 shock mounts

• Connection: 3-pin. XLR female
• 48V phantom power
• Colour: Black

• With 5 polar patterns: omnidirectional, wide cardioid, cardioid, supercardioid, Figure 8 characteristic
• Bass reduction: 40 Hz or 100 Hz switchable
• Level reduction: -6 dB or -12 dB switchable
• Navigation switch with LED display for directional characteristic
• Low-cut and pre-attenuation
• Max sound pressure level: 141 dB (153 dB at -12 dB pad)
• Replacement noise level
• A-rated: 10 dB-A
• Diameter: 64 mm
• Length: 145 mm
• Weight: 445 g
• Colour: Nickel matte
• Incl. SG2 swivel joint and wooden case

• Universal use
• Self-adhesive
• Anti-slip material (cell rubber EPDM 60)
• Rounded edges
• Possible areas of application: under Monitor speakers, 19 "- or hi-fi equipment, table Cases and more.
• Dimensions per pad: 70 x 70 x 15 mm
• Colour: Black
• Set includes 4 pads

• For Neumann KH810 Subwoofer
• For controlling system-level
• Mute and bass management bypass
• Connectors: Neutrik RJ45 socket EtherCon
• Level control range: -95 - 20 dB
• Switching function: Bass Management (Enabled / Disabled)
• LFE Gain (0/10 dB)
• Display: White Neumann Logo
• Bass Management Enabled
• LFE Gain 10 dB
• Dimensions (H x W x D): 50 x 120 x 153 mm
• Weight: 350 g

With nine different directional characteristics, the M 149 Tube can be adapted to very different acoustic recording situations. Like its ancestors, it is particularly suitable for speech and song. This is not only due to its capsule, but also the particularly low replacement noise level of its modern circuit technology.

The M 149 tube is discussed from the side. Its front side is marked by the company nameplate and the directivity switch. Below the capsule, a dome ensures dispersion of sound from the upper half-space, so there is no disturbing interference with the direct sound components. To protect against structure-borne sound, the capsule is elastically mounted. The capsule is surrounded by the large microphone basket of the old M 49, which is now acoustically more open and behaves sound-neutral.

There are nine characteristics to choose from: Omnidirectional, wide cardioid, cardioid, hyper cardioid and figure eight, each with an intermediate position.

Unlike other tube microphones, the M 149 Tube combines a specially selected tube (triode) with state-of-the-art circuitry. The aim of the development was to use the special transmission characteristics of a tube and to bring the hereby amplified capsule signal controlled, unadulterated and feedback-free to the microphone output. Therefore, the usual in tube microphones output transformer is not used. Instead, to drive the different output loads, a particularly suitable for audio signals integrated amplifier with very low distortion (THD

On the back of the microphone is another slide switch. It operates a high-pass filter whose cut-off frequency (3 dB) can be selected in half-octave steps between 20 Hz and 160 Hz. In this way disturbances of air conditioners or impact sound can be faded out in a very targeted manner. In addition, e.g. the volume of a voice can be flexibly measured using the proximity effect.

The M 149 Tube is powered by an 8-core cable from its special N 149 power supply. At its output, the microphone signal is on a 3-pin XLR connector. The microphone is supplied in an aluminium case as a set together with the 8-pin microphone cable, the power supply N 149 and the elastic suspension EA 170.

• Acoustic operation Pressure gradient receiver
• Polar pattern: Omnidirectional, cardioid, wide cardioid, hyper cardioid, figure eight and one intermediate position each
• Transmission range: 20 Hz ... 20 kHz
• Field transmission factor at 1 kHz at 1 kOhm: 34/47/62 mV / Pa (Omnidirectional, / cardioid / figure eight)
• Nominal impedance: 50 ohms
• Nominal load impedance: 1000 ohms
• Replacement noise level CCIR468-3: 28/25/23 dB (omnidirectional / cardioid / figure eight)
• Replacement noise level DIN / IEC651: 16/13/11 dB-A
• Noise level CCIR 468-3: 66/69/71 dB
• Noise level DIN / IEC651: 78/81/83 dB
• Limit sound pressure level (tube characteristic) for K
• Maximum output voltage 18 dBu
• Dynamic range of the amplifier DIN / IEC651 for K
• Power Supply Power Supply N 149
• Weight 730 g
• Diameter 70 mm length 201 mm
• Including aluminium case, 8-pin microphone cable, power supply N 149 A, elastic suspension EA 170, dust bag

• Cardioid
• Frequency range: 20 - 20.000 Hz
• Impedance: 50 Ohm
• Maximum level: 132 dB SPL max.
• 48V Phantom power
• Colour: Black
• XLR connector
• Weight: 300 g
• Delivery incl. neoprene bag and microphone holder

Bundle offer comprising

• Condenser Vocal Microphone
• Cardioid
• Frequency range: 20 - 20.000 Hz
• Impedance: 50 Ohm
• Maximum level: 132 dB SPL max.
• 48V Phantom power
• Colour: Black
• XLR connector
• Weight: 300 g
• Delivery incl. neoprene bag and microphone holder

• Professional microphone cable
• Length: 6 m
• Original Neutrik NC 3 FXX-BAG + NC 3 MXX-BAG XLR plug
• Cable type: CME 220 Black
• Includes hook and loop fastener
• Colour: Black

• 6.5" Woofer
• 1" Tweeter
• DSP-controlled electronics
• Room-adaptive calibration via Neumann's Automatic Monitor Alignment MA 1 (optional, not included in the delivery)
• Switch for a manual room correction
• Frequency response (±3 dB): 39 - 21,000 Hz
• Amplifier: 100 W / 145 W
• Electronic peak/thermo limiter protected circuit are separated for the tweeter and the woofer
• Bass reflex cabinet
• Integrated switching power supply 100-240V, 50/60 Hz
• 1 Line input: XLR
• S/PDIF coaxial
• 2 Ethernet connections: AES67 and Control Network
• Dimensions (H x W x D): 345 x 225 x 273 mm
• Weight: 8 kg