Neunaber

Neunaber Wet Reverb V5, reverb effects pedal, two selectable reverb modes (original Wet / new W3T), original Wet mode provides the classic Wet reverb from the previous pedals, new W3T algorithm is the same as the algorithm on the Immerse Mk II, full Mix knob adjustment from 0% to 100% wet, analog dry signal for low noise and zero latency, selectable trails (choose whether the effect naturally trails or cuts off abruptly after the effect is bypassed), buffered bypass, controls for Tone, Mix, Depth, bypass footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, current draw 100 mA, dimensions (L x W x H) 115 x 64 x 46 mm / 4.6" x 2.6" x 1.9", weight ca. 190 g / 0.42 lbs

• Stereo reverb
• 17 Selectable stereo reverb effect modes cover all conceivable requirements
• 50 Professional factory presets for great sounds right out of the box
• 50 User presets to customise and save your favourite settings
• MIDI input and Thru/Out
• Powerful, flexible expression control engine, optionally with an external expression pedal or via the A/B switch with adjustable delay time
• Adjustable gain structure works with instrument or line-level inputs
• Easy-to-read display with high contrast and wide viewing angle
• Analogue dry signal path for low noise and no latency
• Selectable trails: selects whether the effect decays naturally or cuts off abruptly after the effect is bypassed
• True Bypass / Buffered Bypass (selectable)
• 2x Multi-function controls
• Preset Up / A/B footswitch
• Preset Down / Engage footswitch
• Status LED
• Metal housing
• Inputs / outputs: 6.3 mm TS (mono) and TRS (stereo) jacks
• Expression input: 3.5 mm TRS (stereo) jack
• MIDI input and Thru/Out: 2.5 mm TRS (stereo) jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9-12 V DC mains adapter is not included in the delivery
• Power consumption: 85 mA
• Dimensions (L x W x H): 121 x 99 x 62 mm
• Weight: approx. 415 g
• Incl. 2x 2.5 mm TRS to 5-pin MIDI adapter cable

Note: Battery operation not supported.

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Neunaber Seraphim Shimmer V2, reverb / shimmer effects pedal, two selectable reverb and shimmer modes (original shimmer / W3T shimmer), original shimmer mode from the popular Seraphim V1, W3T shimmer algorithm is the same as the algorithm on the Immerse Mk II (Wet V3), shimmer can be added or removed from the reverb effect, the footswitch seamlessly transitions between shimmer and reverb only, full Mix knob adjustment from 0% to 100% wet, analog dry signal for low noise and zero latency, selectable trails (choose whether the effect naturally trails or cuts off abruptly after the effect is bypassed), buffered bypass, controls for Depth, Mix, Shimmer, bypass footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, current draw 100 mA, dimensions (L x W x H) 115 x 64 x 46 mm / 4.6" x 2.6" x 1.9", weight ca. 190 g / 0.42 lbs

• Stereo chorus
• Analog dry signal prevents background noise and latency
• 8 Chorus modes (Tri / Hex / Tri2 Tone / Tri2 Vibe / Hi / Lo Vibe / Hi / Lo Detune / + Detune / + Echo)
• Effect Adjust changes an effect parameter (depending on the selected mode)
• True bypass
• Controls for Rate, Mix, Depth, Effect Adjust (Tone / Vibe / Pitch / Time)
• 8-Way switch selects the chorus mode
• Bypass foot switch
• Status LED
• Metal housing
• Input and output: 2 x 6.3 mm mono jack each (In L, In R, Out L, Out R)
• Power supply via optional 9 - 12 V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside)
• Current consumption: 95 mA
• Dimensions (L x W x H) 114 x 73 x 51 mm
• Weight approx. 250 g

Note: Battery operation not supported.

Note: Register your product at https://shop.warwick.de/en/warrantyregistration and extend the guarantee to 4 years.

Neunaber Echelon Echo V2, echo / delay effects pedal, two selectable effect modes (hi-fi tape echo / lo-fi delay), hi-fi tape echo simulates the high-frequency saturation of a magnetic tape and is gently modulated for added richness and color (known from Echelon V1), lo-fi delay simulates the reduced bit depth of a vintage digital delay, adjustable delay time from 50 to 1000 ms, full Mix knob adjustment from 0% to 100% wet, analog dry signal for low noise and zero latency, selectable trails (choose whether the effect naturally trails or cuts off abruptly after the effect is bypassed), tap tempo with 4 selectable tempo subdivisions, buffered bypass, controls for Repeats, Mix, Time / Div, bypass / tap tempo footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, current draw 100 mA, dimensions (L x W x H) 115 x 64 x 46 mm / 4.6" x 2.6" x 1.9", weight ca. 190 g / 0.42 lbs

• Digital reverb
• Updated version of the "Immerse Reverberator"
• 8 Reverb Modes: W3T (Wet version 3) / Plate / Reverb / Spring / Sustain / Echo / Detune / Shim
• Different routing options
• Selectable bypass: True / Buffered
• Analog dry signal path for low noise and no latency
• Mix, Time / Tone, Depth, and Pre-Dly / Mod / Blend controls
• 8-Way rotary switch to select between the Reverb modes
• Trails switch on the back
• Kill / Dry switch on the back
• Bypass footswitch
• Status LED
• Metal housing
• 2x 6.3 mm Stereo jacks (1/2) inputs / outputs
• Power supply via optional 9-12V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside (not included)
• Current consumption: 80 mA
• Dimensions (L x W x H): 117 x 73 x 51 mm
• Weight: 250 g
• Made in USA

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.