One Control

One Control Sea Turquoise Delay, delay effects pedal, 600 ms max. delay time, modern, clean delay with natural feeling, unique sounding repeats that let your guitar's tone shine through, designed by Bjorn Juhl, true bypass, controls for Level, Delay, Feedback, Kill Dry switch on the side allows you to mute the dry signal, bypass footswitch, status LED, brushed aluminum housing, 6.3 mm mono in / output jacks, power supply via 9V battery or optional 8 - 12V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center (battery is not included in the delivery), current draw 27 mA, dimensions (L x W x H) 100 x 47 x 48 mm / 3.93" x 1.85" x 1.89", weight ca. 160 g / 0.35 lbs

• Overdrive / distortion
• Wide range of possible sounds for bass and guitar
• Developed by Bjorn Juhl
• True bypass
• Controls for treble, volume, drive, low boost
• Bypass footswitch
• Status LED
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply: 9 V battery or 9-18 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included)
• Power consumption: 12 mA
• Housing made of brushed aluminium
• Dimensions (L x W x H): 100 x 47 x 48 mm
• Weight: approx. 160 g

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Can be used as an A / B box or mute switch
• True bypass
• Bypass foot switch
• Status LED
• 6.3 mm Mono jack input / output
• 6.3 mm Mono jack send / return
• Power supply via optional 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
• Passive operation without power supply possible (status LED without function)
• Current consumption 1 mA
• Metal housing
• Dimensions (L x W x H): 101 x 53 x 49 mm
• Weight: 127 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• Bass preamp / Amp-In-A-Box
• Reproduces the sound and character of a vintage Ampeg V4 amp
• Active mid EQ offers +/- 15 dB at 800 Hz
• Tone control controls low-pass filter in a range of 300 - 10,000 Hz
• Developed by Bjorn Juhl
• Controls for volume, tone, mid
• Side switch for -15 dB mode
• Bypass footswitch
• Status LED
• Aluminium housing
• True bypass
• Input: 6.3 mm mono jack
• Output: 6.3 mm mono jack
• Mains adapter connection: Hollow female plug 2.1 x 5.5 mm (negative pole inside)
• Power supply via 9 V DC mains adapter or 9 V battery (both not included)
• Power consumption: 2 mA
• Dimensions (L x W x H): 100 x 47 x 48 mm
• Weight: approx. 160 g

• Fuzz
• Modern interpretation of a classic Big Muff
• Crisp, defined sound with vintage character
• Perfectly tuned tone control via the Tone knob
• Developed by Bjorn Juhl
• True bypass
• Controls for volume, tone, sustain
• Bypass footswitch
• Status LED
• Aluminium housing
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9 V battery or 9 V DC mains adapter is not included in the delivery
• Power consumption: 6 mA
• Dimensions (L x W x H): 100 x 47 x 46 mm
• Weight: approx. 160 g

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Can be used as an input or output selector switch
• Input and outputs can be used in both directions
• True bypass
• Bypass foot switch
• Status LEDs
• Metal housing
• 1 x 6.3 mm mono jack input
• 2 x 6.3 mm mono jack output
• Power supply via 9 V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
• Passive operation without power supply possible (status LED without function)
• Current consumption: 1 mA
• Dimensions (L x W x H): 101 x 54 x 48 mm
• Weight 140 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

One Control Minimal Series MIDI Dual Stereo Loop - True Bypass Looper; stereo true bypass looper for effect pedals, bypass switching via MIDI, can use between 1-8 MIDI channels to receive control signals, can be controlled via Program Change (PC) or Control Change (CC) signals, mono and stereo signals can be processed variably, true bypass, status LEDs, metal housing, 6.3 mm stereo jack input / output (TRS), 6.3 mm stereo jack send / return (TRS), 5-pin MIDI input, power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside, battery operation not supported, current draw max. 120 mA, dimensions (L x W x H) 68 x 125 x 32 mm / 2.68" x 4.92" x 1.26", weight 366 g / 0.81 lbs

• Reverb
• Developed by Bjorn Juhl
• Harmonises with electric and acoustic guitars and basses
• Extremely high dynamics guarantee a natural high-end sound
• The design combines the strengths of spring, reverb and room reverbs
• Adjustable decay time from 2 ms to 2 s
• Analogue dry path
• True bypass
• Controls for level, tone, decay
• Kill Dry switch on the side mutes the original signal
• Bypass footswitch
• Status LED
• Aluminium housing
• 6.3 mm Mono jack input / output
• Power supply via 9 V battery or optional 8 - 12V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside (battery/power supply not included)
• Current consumption: 27 mA
• Dimensions (L x W x H): 100 x 47 x 48 mm
• Weight approx. 160 g

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• 2 MIDI outputs
• 2 x 9 V outputs (coaxial connection 5.5 x 2.1 mm - negative polarity inside)
• 20 Presets and program change
• Recall / Direct / Flash Mode
• Tap tempo switch for MIDI devices that support remote tap tempo control
• Supports up to 16 MIDI devices on 16 MIDI channels
• Power connector
• Power supply via 9 V DC power supply (not included, matching power supply available under Art.409939)
• Dimensions (W x D x H): 120 x 65 x 46 mm
• Weight: 200 g

One Control Tri Loop - True Bypass Looper / Remote Footswitch / Splitter, selector or momentary footswitch for effects pedals, 4 selectable modes (Red, Bright White, Blue, Green) for different applications, footswitches provide control over two independent send/return loops, switchable buffer, momentary switching can be used as Normally Closed (NC) or Normally Open (NO), true bypass, 2 footswitches (L and R), status LEDs, metal housing, 6.3 mm mono in / output jacks, 6.3 mm mono send / return jacks, 1x 6.3 mm stereo send (R), power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw max. 100 mA, dimensions (L x W x H) 65 x 120 x 50 mm / 2.56" x 4.72" x 1.96", weight 250 g / 0.55 lbs

• Programmable 10-channel true bypass loop switcher for effects pedals
• Foot switches provide control over 10 independent loops and a separate tuner output
• Extremely simple and intuitive programming
• Link function offers the possibility of connecting two OC10s in two selectable modes (sync, download)
• 70 Freely configurable presets (10 banks, 7 presets per bank)
• 2 Selectable switching modes (Program Mode, Direct Mode)
• Integrated BJF buffer circuit with separate inputs and outputs
• 7 Serial loops and 3 separate loops
• Separate loops can be used as amp footswitches (NO / NC)
• Fully MIDI-capable with MIDI Out and MIDI In / Thru
• True bypass
• 10 Foot switches: PGM1 / L1, PGM2 / L2, PGM3 / L3, PGM4 / L4, PGM5 / L5, PGM6 / L6, PGM7 / L7, Bank Up / L8, Bank Dn / L9, Tuner / L10)
• Link Config switch
• MIDI on / off switch
• 10 Push buttons for programming the presets
• Status LEDs
• 6.3 mm Mono jack inputs / outputs
• 5-Pin MIDI input / output
• Power supply via 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
• Current consumption: max. 450 mA
• Metal housing
• Dimensions (L x W x H): 110 x 462 x 64 mm
• Weight: 1800 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

One Control 360 AIAB - Bass Preamp, Amp-In-A-Box Effektpedal, reproduziert den Sound und Charakter des Acoustic 360 Preamps, kräftiger, definierter Bass-Sound der optimal ins Band-Gefüge passt, flexible Klangregelung mit 3-Band EQ, Bass -26 dB bis +6 dB bei 32 Hz, Mid -15 dB bis +6 dB bei 600 Hz, Treble -26 dB bis +20 dB bei 3 kHz, entwickelt von Bjorn Juhl, True Bypass, Regler for Volume, Treble, Mid, Bass, seitlicher Schalter for -18 dB Mode, Bypass Fußschalter, Status LED, Gehäuse aus gebürstetem Aluminium, 6,3 mm Mono-Klinken Ein- / Ausgang, Stromversorgung via 9V Batterie oder optionalem 9V DC Power Supply, 2,1 x 5,5 mm Hohlstecker, Polarität (-) innen (Batterie ist nicht im Lieferumfang enthalten), Stromaufnahme 1,5 mA, Abmessungen (L x B x H) 100 x 47 x 46 mm, Gewicht ca. 160 g

• Footswitches provide control over six independent loops
• 100 Individually configurable presets (20 banks, 5 presets per bank)
• 2 Selectable switching modes (Recall Mode, Direct/Edit Mode)
• Master bypass function
• 6x DC hollow plug outputs (2.1 x 5.5 mm) to loop through the power supply
• True bypass
• 6 footswitches (Bank/Loop 1, PGM 1/Loop 2, PGM 2/Loop 3, PGM 3/Loop 4, PGM 4/Loop 5, PGM 5/Loop 6)
• Program / Direct selector switch
• Status LEDs
• Inputs/outputs: 6.3 mm jack plug
• Power supply via 9 V DC mains adapter with 2.1 x 5.5 mm hollow female plug, polarity (-) inside (mains adapter not included)
• Power consumption: max. 150 mA
• Metal housing
• Dimensions (L x W x H): 41 x 370 x 48 mm
• Weight: 440 g

Note: Battery operation is not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years

• Allows to extend the MIDI functions of the Crocodile Tail Loop and to have full control over all MIDI-enabled effect pedals
• Send CC # (Control Change) and PC (Program Change) data simultaneously via 16 MIDI channels
• 70 user-defined MIDI presets
• POL technology (Power On Link cable)
• Pushbuttons: Mode - Off - OK - Up - Down
• Display: LED display
• Footswitch: Effect Bypass
• Connections: Crocodile Tail Loop LAN Cable Input - MIDI Out
• Power consumption: 50 mA
• Power supply via Power Link cable
• Dimensions (W x D x H): 94 x 39 x 35 mm
• Weight: 100 g

• Programmable 5-channel true bypass loop switcher for effects pedals
• Foot switches provide control over five independent loops and a separate tuner output
• Extremely simple and intuitive programming
• 150 Freely configurable presets (30 banks, 5 presets per bank)
• 2 Selectable switching modes: Program Mode, Direct Mode
• Integrated BJF buffer circuit with separate inputs and outputs
• 2 Additional connections for switching signals (amp footswitch)
• 5 MIDI PC and 5 CC signals can be stored in each preset
• 6 x DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply
• True bypass
• 6 Foot switches: Bank, PGM 1 / L 1, PGM 2 / L 2, PGM 3 / L 3, PGM 4 / L 4, PGM 5 / L 5, Mute / Foot Switch
• Program / Direct switch
• 3 Button switches for programming the presets
• Status LEDs
• 6.3 mm mono jack inputs / outputs
• 5-Pin MIDI input / output
• Power supply via 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
• Current consumption: max. 220 mA
• Metal housing
• Dimensions (L x W x H): 62 x 440 x 49 mm
• Weight: 620 g

Note: Battery operation is not supported.Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• The foot switches provide control over two independent send / return loops
• Can be used as a tuner output / mute switch
• 2 DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply
• True bypass
• Loop 1 foot switch
• Loop 2 foot switch
• Status LEDs
• 6.3 mm Mono jack input / output
• 6.3 mm Mono jack send / return
• Power supply via optional 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside - not included)
• Current consumption 4 mA
• Passive operation without power supply possible (status LEDs and DC barrel connector outputs without function)
• Metal housing
• Dimensions (L x W x H): 65 x 120 x 46 mm
• Weight: 200 g

Note: Battery operation not supportedNote: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• Overdrive
• Covers a wide range of possible sounds from clean boost to high-gain overdrive
• Works equally well with any type of guitar
• Amplifier and pickup
• Designed by Bjorn Juhl
• True bypass
• Controls for volume, treble and drive
• Horizontal low trim poti controls the response behavior in the low end
• Bypass foot switch
• Status LED
• Housing made from brushed aluminium
• 6.3 mm Mono jack in/output
• Power via 9 V battery or 9 - 18 V DC power supply, 2.1 x 5.5 mm AC adapter, polarity (-) inside (battery and power supply not included)
• Current consumption: 10.7 mA
• Dimensions (L x W x H): 100 x 47 x 48 mm
• Weight: Approx. 160 g

Note: Register your product at https://shop.warwick.de/en/warrantyregistration to extend the warranty to 4 years.

• Designed for stereo setups with two amps, stereo effects, or for recordings and live situations where you play directly into the mixer
• Two selectable footswitch modes: Normal / Rapid, for latching or momentary operation
• Switchable mono or stereo operation
• Bypass footswitch
• M/S slide switch
• Status LED
• Metal housing
• Input / output (TRS): 6.3 mm stereo jack
• Send / return (TRS): 6.3 mm stereo jack
• Power supply via 9V DC power supply unit with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply unit not included in the delivery)
• Power consumption: 100 mA
• Dimensions (L x W x H): 98 x 48 x 35 mm
• Weight: 127 g

Note: Battery operation not supported.

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• 2x 9V outputs
• True bypass

One Control Xenagama Tail Loop MKIII - 3-Channel Loop Switcher with BJF Buffer; 3-channel true bypass loop switcher for effects pedals, footswitches provide control over three independent loops and a separate tuner output, high quality BJF Buffer (switchable), 4x DC barrel plug outputs (2.1 x 5.5 mm) for power through connection, true bypass, 4 footswitches (Loop 1, Loop 2, Loop 3, Tuner Out/Mute), status LEDs, metal housing, 6.3 mm mono jack inputs / outputs, power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside, passive operation possible without power supply (status LEDs, BJF buffer and DC barrel plug outputs without function), battery operation not supported, current draw max. 13 mA, dimensions (L x W x H) 41 x 244 x 46 mm / 1.61" x 9,60" x 1.81", weight 310 g / 0.68 lbs