|
|
Condenser Microphone
- Polar pattern: cardioid
- Ideal for recording strings, choir and acoustic guitars
- Frequency range: 40 - 20,000 Hz
- 130 dB SPL
- 21 dBA Inherent noise
- Output impedance: 200 Ohm
- 48V Phantom power or battery power (9 V battery)
- Robust metal housing
- Elastic mounted 1/2" capsule
- Switchable high pass filter
- Switchable preattenuation (-10 dB/ -20 dB)
- Length: 225 mm
- Diameter: 33 mm
- Weight: 360 g
- Incl. wind shield and clamp
|
71.06 £ |
|
|
Bundle offer comprising
Rode Rodecaster Pro II
- Audio Production Studio
- For Podcasters, streamers, musicians and content creators
- 4 XLR / 6.35 mm Jack combo inputs for microphones, guitars, basses and keyboards
- Phantom power 48V
- 8 Programmable SMART pads with 8 banks and 2 bank change buttons (for 64 actions) for triggering audio, effects, MIDI commands, mixer actions and vision switching
- Low-noise Revolution high-gain preamps +76 dB
- Dual USB audio interface for simultaneous connection of 2 computers or mobile devices
- Wideband Bluetooth for first-class voice quality and wireless monitoring
- 9 Freely assignable channels for the individual configuration of the mixer
- 6 Faders
- 3 Virtual faders
- Assignable signal sources: 4x XLR/6.35 mm, Bluetooth, USB 1, USB 2, SMART Pad Audio
- 4 GB Internal memory for SMART Pad Audio
- 5.5-inch HD touchscreen with haptic feedback
- Encoder with touch function for navigation and parameter settings
- Programmed channel presets and VOXLab Quick Editor
- APHEX signal processing: Aural Exciter, Big Bottom, Compellor
- Studio effects: EQ, compressor, reverb, delay, pitch shift, robot voice, mix-minus and ducking
- Stereo and multitrack recordings on microSDHC or microSDXC card, memory card not included in the delivery, USB storage medium (exFAT, at least 100 MB/s) or computer
- 4 Headphone outputs: 6.35 mm TRS jack (250 mW @ 32 ohms)
- 2 Balanced line outputs: 6.35 mm jack
- Wi-Fi (802.11g/n/ac 2.4 GHz) and Ethernet connection (100/1000)
- System requirements for mobile devices: Android 9.0
- Dimensions: 305 x 270 x 60 mm
- Weight: 1.95 kg
- Includes power supply and 3 m USB-C to USB-C cable
the t.bone MB 7 Beta
- Dynamic Broadcast Microphone
- Suitable for Broadcasts, Podcasts, Studio etc.
- Cardioid polar pattern reduces feedback
- Built-in pop filter and shockmount for reducing vibration noise
- Shielded against electromagnetic noise
- Frequency range: 20 to 20000 Hz
- Sensitivity: -57 DB +/- 3 DB
- Output impedance: 320 ohms
- XLR 3-pin connection
- 5/8" Thread
- Dimensions without bracket: diameter 50 mm X length 140 mm
- Dimensions with bracket (L x B x H): 200 x 90 x 50 mm
- Weight: 450 g
- Colour: Black
Millenium DS200 Black
- Table Microphone Boom Arm
- Aluminium construction
- Locking centre joint
- 5/8" threaded connector
- Table clamp for up to max. 56 mm table thickness
- Pre-wired with XLR cable
- Length of upper arm: 43 cm
- Length of lower arm: 40 cm
- Colour: Black
|
Price History: Rode Rodecaster Pro II Mic Bundle1
576.46 £ |
|
|
USB Voice Microphone
- With a dynamic large-diaphragm capsule
- A/D-D/A Conversion is done in the microphone
- Adjustable headphone amplifier with 3.5 mm jack socket integrated
- Directional characteristics: Cardioid
- Maximum sound pressure: 115dB
- Frequency range: 40 Hz to 14 kHz
- Including: Mount for microphone stand, USB cable 3 m
- Optional accessories: Spider connector and swivel arm for table mounting (not included)
|
Price History: Rode Podcaster
118.96 £ |
|
|
Condenser Lavalier Microphone
- Miniature condenser capsule with omnidirectional directional characteristic
- Kevlar-reinforced connecting cable (1.2 m)
- 3.5 mm locking TRS connector
- Broadcast quality sound
- Frequency response: 20 - 20,000 Hz
- Sensitivity: 21 mV/Pa
- SPL (sound pressure level): 110 dB
- Power supply: Plug-in power (2 to 5 V)
- Dimensions: 12 x 4.5 x 4.5 mm
- Includes a foam pop shield, mounting clip and a storage bag
|
Price History: Rode RODELink LAV
67.87 £ |
|
|
Bundle offer comprising Rode NTG2
- Shot Gun Microphone
- Ideally for film/ TV/ video
- Polar pattern: super cardioid
- XLR Connector
- Operated with 1.5 V alkaline battery or 48 V phantom power
- Frequency range: 20 - 20.000 Hz
- Max. SPL: 131 dB
- Output impedance: 250 Ohm
- Dimensions: 280 x 22 x 22 mm
- Weight: 161 g
- Incl. windshield and clamp
Thomann ShotgunMic Bag L
- Microphone Bag
- Perfect for shotgun microphones and accessories
- Suitable for e.g. Sennheiser MKE 600, Rode NTG2/3/4+ Neumann KMR 81, Shure VP 89M with windscreen, T.Bone 9600 and similar
- 2 Compartments with hook-and-loop subdivision, measuring: 335 x 80 x 40 mm and 335 x 40 x 40 mm
- Material: Cordura (robust, abrasion-resistant, water-repellent nylon)
- With foam padding
- 1 Carrying loop
- Outer dimensions: 150 x 360 x 70 mm
- Inner dimensions: 145 x 350 x 60 mm
- Weight: 0.3 kg
- Colour: Black
|
Price History: Rode NTG2 Bag Bundle
206.79 £ |
|
|
Shotgun Condenser Microphone
- Polar pattern: super cardioid
- Internal lithium battery
- Up to 150 hours operating time
- Charging time under 2 hours
- Charging via micro USB
- Robust and climate proof
- High sensitivity: 25 mV
- Low inherent noise: 16 dBA
- Phantom power: 12 V, 24 V, 48 V
- Electric buttons for high pass filter: 75 Hz
- Pre-attenuation (-10 dB) and presence boost
- Length: 27.8 cm
- Diameter: 2.2 cm
- Weight: 176 g
- Incl. clamp RM5, foam wind shield WSNTG4, micro USB cable
|
Price History: Rode NTG4+
190.82 £ |
|
|
Shotgun Condenser Microphone
- HF Technology with vacuum-sealed electronics (Conformal Coating)
- Extremely climate-resistant and insensitive to interference
- Polar pattern: Supercardioid
- Maximum sound pressure level: 130 dB (1.0% THD)
- Equivalent noise level: 10 dBA
- Frequency response: 80 - 20000 Hz (±3 dB)
- Frequency response: 20 - 20000 Hz
- Sensitivity: 66 mV/Pa
- Output impedance: 25 Ohm
- Requires +48 V Phantom power 2 mA
- Aluminium housing
- Dimensions (length x diameter): 203 x 19 mm
- Weight: 76 g
- Includes PG2-R pistol grip with Rycote boom mount, PG2-R Pro special cable, WS10 foam windscreen and WS10 deluxe windscreen, RM5 microphone clamp and ZP1 carrying case
- Suitable case: Article no. 486815 (not included)
|
Price History: Rode NTG5 Kit
390.43 £ |
|
|
|
Price History: Rode Wireless GO II Single Bundle
174.85 £ |
|
|
|
9.18 £ |
|
|
|
9.90 £ |
|
|
Windscreen for Rode VideoMic GO
- Artificial fur windscreen up to wind speed 4
- For use in combination with foam windscreen premounted on VideoMic GO
- Acoustically transparent
- Dimensions: 180 x 70 x 70 mm
- Weight: 15 g
|
Price History: Rode DeadCat Go
18.28 £ |
|
|
Dynamic live vocal microphone
- Internal pop filter
- Low handling noise
- Feedback resistant
- Gold XLR connector
- Polar pattern: Niere
- Frequency range: 75 - 18,000 Hz
- Output impedance: 320 Ohm
- Dimensions: 171 x 51.5 mm
- Weight: 360 g
- Included in delivery: Transport bag, stand clamp
|
63.08 £ |
|
|
Fur windscreen
- For M5 and VideoMicro and VideoMic Me
- Inner diameter: 22 mm
- Dimensions (W x D x H): 100 x 90 x 90 mm
- Weight: 13 g
|
12.69 £ |
|
|
Small Diaphragm Stereo Microphone Set
- 2 Hand-selected condenser microphones
- Gold-coated 1/2" cardioid capsules
- Matte-black and scratch-resistant metal housing
- Frequency response: 20 - 20,000 Hz
- Max. sound pressure level: 135 dB SPL (1kHz @ 1% THD)
- Inherent-noise: 14 dBA
- Sensitivity: 35 mV
- Power supply: 48 V phantom power (7 mA)
- Dimensions of a microphone (L x Ø): 89.7 x 20 mm
- Weight of one microphone: 114 g
- Incl. 2 stand clamps, 2 foam windscreens and stereo rail SB20
|
1,037.15 £ |
|
|
Windshield for VideoMic NTG
- Foam mesh on the inside and synthetic fur on the outside
- Acoustically transparent
- Protects against noise up to approx. wind force 5 during outdoor recordings
- Dimensions (L x D): 125 x 85 mm
- Weight: 21 g
|
27.94 £ |
|
|
|
Price History: Rode Podcaster Bundle
135.73 £ |
|
|
Plug adapter with power converter
- TRS Mini-jack (3.5 mm) to XLR 3M
- Integrated voltage converter from phantom power (12 - 48 V) to plug-in power (3 - 5 V)
- Allows operation of Rode HS2, VideoMic GO and VideoMicro on professional XLR microphone inputs with phantom power
- Jack socket with male thread for locking (for plug with cap nut)
- Length: 66 mm
- Weight: 60 g
- Includes belt clip (removable)
|
Price History: Rode VXLR+
17.09 £ |
|
|
Shotgun Microphone for iPhone and iPad
- Suitable for all iOS devices with Lightning connector for direct plugging
- 1/2" Condenser capsule
- Polar pattern: Cardioid
- Built-in preamp with D / A converter (24-bit / 48 kHz)
- Frequency range: 20 - 20,000 Hz
- Self-noise: 19.5 dBA
- Max. sound pressure level: 115 dB
- Headphone output: 3.5 mm mini jack on the back
- Aluminium housing with scratch-resistant ceramic coating
- System requirement: iOS 11
- Dimensions (W x H x D): 73.5 x 25.7 x 20 mm
- Weight: 28 g
- Includes clip and deluxe fur windshield
Note: iPhone and earbuds not included.
|
Price History: Rode VideoMic Me-L
54.29 £ |
|
|
Bundle offer comprising Rode NT3
- Condenser Microphone
- For stage and studio operation
- Elastically mounted 3/4" true condenser capsule - externally polarized
- Cardioid
- Frequency range: 20 - 20,000 Hz
- Peak SPL: 140 dB
- Sensitivity: 12 mV
- Inherent noise: 16 dBA
- Operated with 48 V phantom power or 9V battery (not included)
- On/ off switch with battery status LED
- Address type: front
- Satined nickel-plated metal cast housing
- Robust windscreen
- Effective shielding RF interference
- For outdoor recording and stage use
- Ideal for recording choir, brass orchestra and other acoustic instruments
- Thanks to good structure-borne noise suppression it can also be used as moderation microphone
- Length: 20.6 cm
- Diameter: 3.2 cm
- Weight (without battery): 371 g
- Incl. foam windscreen WS 3, RM3 stand clamp and ZP1 transport case
the t.bone SSM 6
- Universal Microphone Shock Mount
- For all microphones with diameter between 20 - 40 mm
- Inner thread: 5/8"
- Weight: 148.5 g
the sssnake SM6BK
- Microphone cable
- XLR 3-pin male - XLR 3-pin female
- Length: 6 m
- Diameter: 6 mm
- Wire cross-section: 2 x 0.22 mm²
- Colour: Black
|
Price History: Rode NT3 Bundle
170.06 £ |
|
|
Condenser directional microphone for iPhone and iPad
- Small and lightweight
- Integrated TRRS plug for connection to the headset jack
- Front-facing or selfie mode audio recording depending on the plug-in direction
- Built-in 3.5mm headphone jack for monitoring during recording and playback
- 1/2" Condensor capsule
- Polar pattern: Cardioid
- Frequency range: 100 - 20,000 Hz
- Sensitivity: 22 mV
- Self-noise: 20 dBA
- Max. sound pressure level: 140 dB
- Metal housing
- Dimensions: 38 x 21 x 80 mm
- Weight: 34 g
- Includes attachable fur windshield
|
Price History: Rode VideoMic Me
46.31 £ |