Rode

• Directional characteristic: Super-cardioid
• Robust and weather-proof
• High sensitivity: 25 mV
• Low inherent self-noise: 16 dBA
• Phantom power: 12 V, 24 V, 48 V
• Electronic switch for high pass filters: 75 Hz
• Attenuation (-10 dB) and presence boost
• Length: 22.5 cm
• Diameter: 2.2 cm
• Weight: 126 g
• Incl. RM5 stand mount, foam windscreen WSNTG4

• 1/2" capsule with supercardioid polar pattern
• Over 100 hours of operation with LB-1 RØDE battery (included)
• Auto on / off function - microphone turns on and off together with the camera (requires camera with plug-in power)
• Electronic buttons with status LEDs
• Brightness of the LEDs depends on the surrounding light
• Safety mode switchable - recording takes place on the right channel of the camera (10 dB lower)
• Three-stage level switch (-10 dB / dB 0 / +20 dB)
• High-pass filter, two-stage switchable (75 Hz and 150 Hz)
• High-frequency boost (switchable 7 kHz / + 5 dB) - compensates for loss of frequencies when using a fur windshield
• Provides even better speech intelligibility
• Output jack: 3.5 mm TRS jack (double mono)
• Frequency range: 20 - 20,000 Hz
• Max. SPL: 133 dB
• Power supply via rechargeable battery (included)
• 2x AA batteries (not included) or USB
• Battery charging takes place via USB (cable is included)
• Onboard Rycote Lyre suspension system
• 3/8" Tripod thread or for mounting to a boom
• Incl. foam windshield, battery LB-1 3.8 V / 1600 mAh / 6.08 Wh, micro USB cable, TRS jack cable
• Length: 17 cm
• Weight: 122 g (without battery)

Bundle offer comprising

• Shot Gun Microphone
• Ideally for film/ TV/ video
• Polar pattern: super cardioid
• XLR Connector
• Operated with 1.5 V alkaline battery or 48 V phantom power
• Frequency range: 20 - 20.000 Hz
• Max. SPL: 131 dB
• Output impedance: 250 Ohm
• Dimensions: 280 x 22 x 22 mm
• Weight: 161 g
• Incl. windshield and clamp

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• For podcasters, streamers, musicians and content creators
• 4 XLR / 6.35 mm jack combo inputs for microphones, guitars, bass and keyboards
• 48 V phantom power
• 8 Programmable SMART pads with 8 banks and 2 bank change buttons (for 64 actions) for triggering audio, effects, MIDI commands, mixer actions and vision switching
• Low-noise Revolution high-gain preamps (+76 dB)
• Dual USB audio interface for simultaneous connection of 2 computers or mobile devices
• Wideband Bluetooth for first-class voice quality and wireless monitoring
• 9 Individually assignable channels for individual configuration of the mixer
• 6 Faders
• 3 Virtual faders
• Assignable signal sources: 4x XLR/6.35 mm, Bluetooth, USB 1, USB 2, SMART Pad Audio
• 4 GB internal memory for SMART Pad Audio
• 5.5-inch HD touchscreen with haptic feedback
• Encoder with touch function for navigation and parameter settings
• Programmed channel presets and VOXLab Quick Editor
• APHEX signal processing: Aural Exciter, Big Bottom, Compellor
• Studio effects: EQ, Compressor, Reverb, Delay, Pitch Shift, Robot Voice, Mix-Minus and Ducking
• Stereo and multitrack recordings on microSDHC or microSDXC card (memory card not included), USB storage medium (exFAT, at least 100 MB/s) or computer
• 4 Headphone outputs: 6.35 mm TRS jack (250 mW @ 32 ohms)
• 2 Balanced line outputs: 6.35 mm jack
• Wi-Fi (802.11g/n/ac 2.4 GHz) and Ethernet connection (100/1000)
• System requirements mobile devices: Android 9.0
• Dimensions: 305 x 270 x 60 mm
• Weight: 1.95 kg
• Incl. power supply and 3 m USB-C to USB-C cable

• Specially developed for podcasts
• 4 XLR microphone inputs with 48 V phantom power
• 8 Programmable sound pads for jingles and FX
• Instant mix minus for phone or app calls
• 3.5 mm TRRS cable, USB and Bluetooth connectivity
• High-resolution touch screen
• 4 Headphone outputs and stereo speaker output
• Record directly to microSD card or via USB to the computer
• Automatic level adjustment and one-touch recording
• Directly record effects, music, jingles etc. from one of the audio inputs to the 8 pads or assign with the software included via drag & drop
• Effects: APHEX Big Bottom and Aural Exciter, Compressor, Gate, High-pass Filter, De-esser, Ducking
• Intuitive presets for microphone types and different types of voice
• Dimensions: 350 x 275 x 82 mm
• Weight: 1.98 kg
• Suitable cases: Art.489625, Art.504659, Art.505132 and Art.505130 (all not included in delivery)
• Suitable soft case: Art.508181 (not included in delivery)
• Suitable case: Art.498211 (not included in delivery)

• Polar pattern: Omnidirectional
• Compatible with RODE NT4, NT5 and NT6
• Including 10 year manufacturer warranty

• Compatible with Rode Podcaster, NT1-A, NT2-A, NT1000, NTK and Procaster
• Colour: Black

Bundle offer comprising

• Shotgun Condenser Microphone
• HF Technology with vacuum-sealed electronics (Conformal Coating)
• Extremely climate-resistant and insensitive to interference
• Polar pattern: Supercardioid
• Maximum sound pressure level: 130 dB (1.0% THD)
• Equivalent noise level: 10 dBA
• Frequency response: 80 - 20000 Hz (±3 dB)
• Frequency response: 20 - 20000 Hz
• Sensitivity: 66 mV/Pa
• Output impedance: 25 Ohm
• Requires +48 V Phantom power 2 mA
• Aluminium housing
• Dimensions (length x diameter): 203 x 19 mm
• Weight: 76 g
• Includes PG2-R pistol grip with Rycote boom mount, PG2-R Pro special cable, WS10 foam windscreen and WS10 deluxe windscreen, RM5 microphone clamp and ZP1 carrying case
• Suitable case: Article no. 486815 (not included)

• Case
• Suitable for Rode NTG5 Kit
• Material: Plastic/aluminium
• 2 Metal hinges
• 2 Lockable snap locks incl. key
• Interior with EVA
• Foam on top cover
• Case handle
• Internal dimensions: 400 x 300 x 110 mm
• External dimensions: 455 x 315 x 124 mm
• Weight: 2.65 kg
• Colour: Black

• Plug & Play - without battery (supply voltage required from the camera: 3 V - 18 V
• Solid metal housing (aluminium) with scratch-resistant ceramic coating
• RF shielding against interference
• Polar pattern: Cardioid
• Body decoupling by Rycote lyre vibration support
• Attached to the camera by means of integrated standard flash adapter
• 3/8" inner thread in socket for tripod or boom mount
• Connection cable with 3.5 mm TRS jack plug (double mono)
• Frequency range: 100 - 20,000 Hz
• Sensitivity: 22 mV
• Inherent noise: 20 dBA
• Peak SPL: 140 dB
• Length: 8.0 cm
• Weight: 42 g
• Including Rycote lyre, SC2 connection cable and deluxe wind shield WS9

Bundle offer comprising

• Condenser Microphone
• Polar pattern: cardioid
• Ideal for recording strings, choir and acoustic guitars
• Frequency range: 40 - 20,000 Hz
• 130 dB SPL
• 21 dBA Inherent noise
• Output impedance: 200 Ohm
• 48V Phantom power or battery power (9 V battery)
• Robust metal housing
• Elastic mounted 1/2" capsule
• Switchable high pass filter
• Switchable preattenuation (-10 dB/ -20 dB)
• Length: 225 mm
• Diameter: 33 mm
• Weight: 360 g
• Incl. wind shield and clamp

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• For NT5, NT55 and NT6

• With condenser capsule
• On-Air indicator
• Internal pop filter
• Incl. microphone holder BM1 and case
• Includes a 10 year manufacturer warranty

Bundle offer comprising

• USB Voice Microphone
• With a dynamic large-diaphragm capsule
• A/D-D/A Conversion is done in the microphone
• Adjustable headphone amplifier with 3.5 mm jack socket integrated
• Directional characteristics: Cardioid
• Maximum sound pressure: 115dB
• Frequency range: 40 Hz to 14 kHz
• Including: Mount for microphone stand, USB cable 3 m
• Optional accessories: Spider connector and swivel arm for table mounting (not included)

• Table microphone arm with cable guide
• Cables up to 8 mm in diameter can be attached to the underside of the arms with a clip system
• Aluminium construction
• Locking centre joint
• 3/8" Rhreaded connection with 5/8" adapter
• Table clamp up to 56 mm or table feed-through up to 45 mm (20 mm hole)
• Length upper arm: 43 cm
• Length lower arm: 43 cm
• Colour: Black

• With integrated Rycote lyre bracket
• High pass filter switchable
• Level adjustment (-10 dB / +20 dB) switchable
• On/Off switch
• Charge status LED indicator
• Transducer type: Pressure gradient transducer
• 2x 1/2" condenser capsule
• JFET impedance converter
• Directional characteristic: 2x cardioid (X/Y)
• Frequency range: 40 Hz - 20 kHz
• Inherent noise: 20 dBA
• Dynamic range: 114 dB
• Sensitivity: 38.0 mV/Pa
• Maximum sound pressure: 134 dB (1 kHz, 1% THD, 1 kOhm load)
• Output impedance: 200 Ohm
• Maximum output level: +4.2 dBu (1 kHz, 1% THD, 1 kOhm load)
• Connector Type: 3.5 mm mini jack
• Power supply via 9 V battery (over 100 hours continuous operation, not included)
• Dimensions (W x D x H): 80 x 115 x 134 mm
• Weight: 116 g
• Improved foam windshield included

• For stage and studio operation
• Elastically mounted 3/4" true condenser capsule - externally polarized
• Cardioid
• Frequency range: 20 - 20,000 Hz
• Peak SPL: 140 dB
• Sensitivity: 12 mV
• Inherent noise: 16 dBA
• Operated with 48 V phantom power or 9V battery (not included)
• On/ off switch with battery status LED
• Address type: front
• Satined nickel-plated metal cast housing
• Robust windscreen
• Effective shielding RF interference
• For outdoor recording and stage use
• Ideal for recording choir, brass orchestra and other acoustic instruments
• Thanks to good structure-borne noise suppression it can also be used as moderation microphone
• Length: 20.6 cm
• Diameter: 3.2 cm
• Weight (without battery): 371 g
• Incl. foam windscreen WS 3, RM3 stand clamp and ZP1 transport case

With a low inherent noise of only 6 dBA and transformerless output circuitry, the RØDE NT1000 enables excellent vocal and instrumental recording. The NT1000 has also found many users who call it the ultimate microphone for overheads as well as for miking concert grand pianos. The 1" HF2 capsule, developed by RØDE and manufactured in Australia, is elastically mounted and with a dynamic range of 134 dB, a maximum sound pressure level of 140 dBA, and a frequency range of 20 Hz - 20 kHz.

• Large HF2 capsule with gold-plated diaphragm
• Extremely low-noise, transformerless SMD circuit
• Directional characteristic: cardioid
• Robust, satin-matte nickel-plated housing
• Robust, welded and heat-treated mesh head
• Capsule is internally elastically mounted
• True, externally polarised condenser microphone
• Very well suited to speech and vocal recordings

• True condenser microphone with gold sputtered 1/2” capsule
• Cardiod characteristic
• Frequency range: 20 - 20.000 Hz
• Output impedance: 100 Ohm
• Maximum SPL: 143 dB
• Max. output level: +13.9 dBu
• Very low noise
• Requires 48V phantom power
• Dimensions (H x W x D): 118 x 20 x 20 mm
• Weight of each mic: 101 g
• Finish: Satin nickel
• Incl. 2 x foam windscreen WS5
• 2 x RM5 stand adapter and ZP1 carrying case

• Fitting for NTG-1 and NTG-2 or for shotgun microphones with a maximum slot-length of 160.5 mm (6 1/4") and a diameter of 21 to 22.5 mm

Bundle offer comprising

• Live Condenser Microphone
• Supercardioid characteristics
• Robust metal housing
• Low handling noise
• Good feedback rejection
• Frequency range: 35 - 20000 Hz
• Maximum SPL: 141 dB
• Required phantom power (24V - 48V)
• Impedance: 50 Ohm
• Mute switch
• Length: 187 x 47 x 47 mm
• Weight: 308 g
• Includes a 10 year manufacturer warranty

• Microphone Stand Set
• Consists of microphone stand and microphone cable
• 10 m Microphone cable with 3-pin XLR connectors
• High quality flexible cable
• Microphone stand with boom
• Plastic tripod base
• Maximum usable height of the stand including boom: 190 cm
• Adjustable height of centre column 75 - 130 cm
• Length of boom: 65 cm
• Diameter of stand: 64 cm
• Transport length of tripod: 74 cm
• Thread 3/8" with 5/8" adapter
• Weight of stand: 1.46 kg
• Includes clamp for cable routing

• Synthetic fur windscreen with foam inner braid
• Protects against noise up to wind force 5
• Dimensions (W x D x H): 80 x 80 x 200 mm
• Weight: 33 g