the t.bone

• Suitable for microphones with a diameter of 40 - 50 mm (e.g. Shure SM 58, etc.)
• Made of foam
• In 5 colours: Blue, yellow, orange, red, and black

• With mic preamps and integrated A / D converter
• 16-Bit / 44.1 / 48 kHz
• Plugged directly on microphone
• Integrated 48V phantom power
• Headphone output
• Quality mic preamps with adjustable gain
• Powered by USB
• For Win XP, Vista, Mac OSX
• Incl. USB cable

Bundle offer comprising

• Ribbon Microphone
• Characteristics: Figure-8
• Frequency range: 30 Hz - 15 kHz
• Sensitivity: -54 dB
• SPL max. : 148 dB
• Impedance: = /
• Incl. shock mount (elastic holder)
• Dimensions: D: 37 mm, L: 175 mm
• Weight: 496 g
• WARNING: Switch off phantom power!

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

Bundle offer comprising

• Wireless Systems for Guitar and Bass
• UHF wireless system with a pocket transmitter
• 14 Pre-programmed frequency groups with 15 available channels each
• 1 User channel
• Adjustable squelch with threshold display on the receiver
• Frequency scan in the receiver
• Adjustable AF output
• Adjustable transmission power: 5 mW, 10 mW, 20 mW
• Infrared transfer of the settings from the receiver to the transmitter
• Pilot tone
• Increments of 25 kHz
• Housing: 9.5", 1 U with 2 BNC outputs for antennas
• XLR- and jack output
• Operates with 12 V, 0.5 DC power supply (positive polarity (+) on the inside)
• Transmitter housing: Plastic
• 3 TQG male connector
• LCD display
• Operates with 2 AA batteries or rechargeable batteries (not included)
• Frequency band: 596 - 620 MHz
• Includes a guitar cable, plastic case and rackmount
• Optional antenna converters available under Article Nr 177448 (not included)

• Lavalier Microphone
• Cardioid polar pattern
• 3-Pin Mini XLR connector (AKG compatible!)
• Wind shield included

Note: Suitable for all t.bone radio systems except TWS One, GigA and Column

Bundle offer comprising

• Large diaphragm studio microphone
• With a 1.07" double diaphragm, switchable polar pattern (omnidirectional, cardioid, eight) and high-pass filter, the SC1100 is suitable for all studio situations.
• Switchable polar pattern: Omni-directional, figure-eight and cardioid
• Low cut switch
• Frequency response: 20 - 20.000 Hz
• Sound pressure limit: 123 dB
• Sensitivity: 39.4 mV/Pa
• Output impedance: 200 Ohm
• Distortion:
• Equivalent noise level [dB(A)]: 8.2 (ball)/ 6.8 (super-cardioid)/ 6.7 (eight)
• Power supply via phantom power 48 V (±4 V)
• Weight 941 g
• Includes aluminum case and new shock-mount

• Pop Filter
• For screwing onto microphone shockmount
• With aluminum grid
• Height adjustable
• Clamp for vertical or horizontal mounting
• Clamping range up to 14 mm
• Dimensions of the filter (W x H): 88 x 93 mm
• Rod length: 17 cm
• Weight: 80 g

Set in aluminium case, consists of:

• 1 Dynamic bass drum microphone BD 25 Beta (supercardioid 20-12000 Hz)
• 4 Dynamic snare/tom microphones CD 56 Beta (supercardioid 50-16000 Hz)
• 2 Back-electret overhead microphones EM 81 (supercardioid, 9 - 52V phantom power, 50 - 20000 Hz)

• 2 Matched the t.bone EM700 condenser microphones
• With 16 mm capsule
• Characteristic: Supercardioid
• Frequency range: 50 - 20.000 Hz
• Low cut switch: -3 dB @ 75 Hz or 150 Hz
• Pad switch: -10 dB or -20 dB
• Sensitivity: -42 dB (7.9 mV / Pa)
• Max. SPL: 135 dB
• Includes shock mount and windscreen and (3/8") stereo rail

Note: Requires 48V phantom power.

Bundle offer comprising

• 2-Channel UHF Wireless System
• With 2 pocket transmitters
• Frequency band: 823 - 832 MHz
• 8 Pre-programmed frequency groups with 8 available channels each
• 1 User group with freely selectable frequencies
• Adjustable squelch with threshold display on the receiver
• Frequency scan in the receiver
• Adjustable AF output
• Adjustable transmission power: 5 mW, 10 mW, 20 mW
• Infrared transfer of the settings from the receiver to the transmitter
• Pilot tone
• Increments of 25 kHz
• 19" / 1U housing with 2 BNC outputs for antennas
• XLR- and jack output
• Operates at 12 V / 500 mA DC power supply (positive (+) polarity inside)
• Transmitter housing: Plastic
• 3-Pin TQG male connector
• LCD display
• Operates with 2x AA batteries or rechargeable batteries
• Includes batteries, a guitar cable, a plastic case and rackmount
• Optional antenna converters available under Article Nr 177448 (not included)

• Headset Microphone
• Lightweight condenser Headset Microphone
• Two earhooks
• Left/right adjustable
• Characteristic: Kidney
• Frequency range: 50 - 20000 Hz
• Sensitivity: 4.4 mV / Pa, -47.2 dB re 1 V / Pa
• Sound pressure level limit: 115 dB
• Impedance: 750 Ohm
• 3-pin Mini XLR connector suitable for AKG Bodypack transmitter
• Cable length: Approx. 120 cm
• Colour: Beige / flesh coloured
• Includes cable clip
• Additional draft shield: Article number 355914 (not included)

• Suitable for SC450 and similar large membrane microphones (SC 400, SC 600)
• Diameter from 42 to 44 mm

• Lightweight condenser lavalier microphone for voice- and music applications
• Omnidirectional polar pattern
• 50 - 20,000 Hz
• 2.7 mV / Pa
• -51.2 dB re 1 V / Pa
• 125 dB SPL max
• 300 Ohm
• 3.5 mm Stereo jack connector for Sennheiser EW wireless systems
• Colour: Beige
• Cable length approx. 120 cm
• Incl. cable clip and wind shield

• 2.4 GHz Plug-on system for dynamic microphones and line signals
• Ready-to-use set consisting of transmitter and receiver
• 2.4 GHz band suitable for licence-free operation worldwide
• 24-bit / 44.1 kHz high-resolution audio quality
• 6 Auto-Pairing channels
• Range up to 30 m
• Latency
• Integrated Li-ion battery
• Battery life: Approximately 7 hours
• LED display for charge status
• 4 Systems can be operated simultaneously
• Dimensions (L x W x H): Approximately 108 x 26 x 26 mm
• Weight: 130 g
• Includes USB charging cable and XLR to 3.5 mm mini jack adapter
• Suitable adapter cable for smartphone: Article no. 492061 (not included)
• Suitable Mobile Shoe with smartphone cable: Article no. 464922 (not included)

Note:Transmitter does not provide phantom power, therefore use with a condenser microphone is not possible.

Bundle offer comprising

• Table Absorber for Acoustic Optimisation
• Ideal for podcast applications, singer / songwriters, streamers, home producers, offices and call centres
• Material: hardened polyurethane soft foam
• Bulk density: 25 kg / m³
• Compression hardness at 40 % deformation: 6.0 ± 0.5 kPa
• Tensile strength: min. 100 kPa
• Elongation at break: min. 80
• Flame retardant according to MVSS 302 (burning rate
• Felt fabric light grey - 370 g/m2
• Very easy to assemble by simply plugging the three components into each other
• Variably adjustable side panels for optimum adaptation
• Panel thickness: 80 mm
• Internal dimensions (W x H x D): 1040 x 600 x 500 mm
• External dimensions (W x H x D): 1200 x 600 x 580 mm

• USB Studio large diaphragm microphone set
• With USB port for direct operation on the computer
• No additional drivers necessary
• Directivity: Cardioid
• Frequency range: 30 - 18,000 Hz
• Sensitivity: 25 mV / Pa
• Maximum sound pressure: 140dB (at 1 kHz = 1% T.H.D)
• 16 Bits / 48 kHz
• Headphone output with direct-monitoring
• Mute button
• Includes PVC case, shock-mount, USB cable, foam wind-screen, pop-killer and table tripod

• Headphones
• Circumaural
• Closed
• Rotatable earcups
• 57 mm driver
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 110 dB
• Impedance: 32 Ohm
• Max. input level: 100 mW
• 3 m cable with 3.5 mm jack plug and 6.3 mm adapter
• Weight without cable: 244 g

• Audio-MIDI-Sequencer (DAW)
• makes multi-track recordings possible
• object-based workflow
• Effects & Analyzer
• individually adjustable program surface/interface
• supported languages: German, English, French, Spanish, Italian

Note: For Windows 8 or later only, Mac OS X is not supported

Bundle offer comprising

• 2.4 GHz Wireless System for Guitar and Bass
• Consists of a GigA Pro pedal receiver and GigA Pro Plug-On transmitter
• Up to 8 frequencies in parallel
• Up to 32 programs can be saved
• Robust pedal board (metal casing)
• Footswitch for programme / mute
• Cable tone function simulates 14 different cable lengths
• Anti-feedback function with 31 filters
• Acoustic response function
• Switchable polarity
• 4 Outputs: 2x 6.3 mm jack, 1x 6.3 mm jack tuner output, 1x XLR output
• LCD display
• IR port for ACT sync function
• Transmitter operates with 1x lithium battery (ICR 18500) with up to 10 hours of battery life
• 24-Bit / 44.1 kHz
• Transmitter comes in robust plastic housing
• 6.3 mm Jack adapter can be screwed on
• Optional cable operation is possible
• FSK modulation
• 3-Digit battery indicator
• Flexible stub antenna
• Charging contacts for an MP24 charging station (included)
• Frequency range: 2.400 - 2.4835 GHz
• Transmission power: 10 mW
• Low latency:
• Range of up to 100 m in a free field of view
• Receiver dimensions (W x D x H): 110 x 130 x 50 mm - Weight: 850 g
• Transmitter dimensions: (W x D x H): 84 x 35 x 29 mm - Weight: 61 g
• Battery charging station dimensions (W x D x H): 72 x 76.5 x 68 mm - Weight: 162 g
• Includes power supply for a receiver and battery charging station, guitar- and bass cable, belt clip, battery pack and MP24 battery charger
• No license is required and no charges are incurred when used anywhere in the world

• Gooseneck Microphone
• Clip-on microphone for brass and woodwind instruments
• For use with the t.bone GigA Pro GT (Article Nr. 453986, not included) or for expansion of an already existing GigA Pro system
• Condenser capsule (10 mm)
• Cardioid characteristic
• Frequency range: 65 - 20000 Hz
• Sensitivity: -52 dB
• Maximum sound pressure level: 142 dB (SPL)
• Output: 3.5 mm mini jack socket with thread
• Dimensions (Ø x L): 10 x 197 mm
• Weight: Approximately 57 g
• Colour: Black

• With L-connector (3-pin mini XLR) for all AKG wireless systems
• Medium sensitivity
• Directional characteristic: Omnidirectional
• Frequency response: 50 - 20,000 Hz
• Weight: 13 g
• Colour: Beige
• Suitable replacement windscreen available under Article Nr 185514 (not included, must be ordered separately)

• For speaking and music uses
• Omnidirectional polar pattern
• 50 - 20,000 Hz
• 2.7 mV / Pa
• -51.2 dB re 1 V / Pa
• 125 dB SPL max.
• 300 Ohm
• 3-Pin TQG connector for AKG and t.bone wireless system
• Colour: Beige
• Cable length approx. 120 cm
• Incl. Cable clip and wind shield

• 9.5" Diversity receiver
• Handheld microphone
• 16 Switchable frequencies (821.725 MHz - 831.450 MHz)
• 4 Systems operatable simultaneously
• Adjustable squelch
• XLR and jack output
• External power adaptor (DC 12V/500mA)
• Included accessories: 9.5" rack mount (usable as 19'' 1 RU rack mount with a second TWS16), jack output cabel (1m)
• Options available: microphone clamp (Article Nr 288991)

• Easy installation with different instrument holders (optional - not included)
• With phantom power adapter (phantom power required)
• Detachable cable with screw contact
• Directivity: Cardioid
• Frequency range: 20 - 20,000 Hz
• Flexible gooseneck for easy positioning on the instrument
• 4-Pin mini XLR connector for operating Shure wireless systems
• Length of the gooseneck: 130 mm
• Cable length: 1.2 m
• Suitable cables with Sennheiser EW and 3-pin TQG connector for the t.bone and AKG systems available separately (not included)
• Foam windshield included

• 9.5" Diversity receiver
• Bodypack (line/mic switchable) with 3-pin mini XLR connection (AKG compatible)
• 14 Frequencies from 16 switchable channels ( 863.125 MHz - 864.875 MHz registration- and license free)
• 3 Sets can be used at the same time
• Adjustable squelch
• XLR and jack output
• External power adapter (DC 12V/500mA)
• Included accessories: 9.5" Rack mount (usable in conjunction with a second TWS16 as a 19"/1 U rack mount), jack output cable: 1m, guitar cable: 1m

• 9.5" Diversity receiver
• Bodypack transmitter (line/mic switchable) with 3-pin mini XLR connection (AKG compatible)
• 16 Switchable frequencies (606 MHz - 630 MHz)
• 3 Systems can be simultaneously used
• Adjustable squelch
• Jack output
• Ext. power adapter (DC 12V/500mA)
• Included accessories: 9.5" Rack mount (Only in conjunction with a second TWS16!), guitar cable: 1 m
• Note: Frequency range specifically for UK

Bundle offer comprising

• Wireless System for Guitar or Bass
• UHF wireless system with a pocket transmitter
• 8 Pre-programmed frequency groups with 8 available channels each
• 1 User channel
• Adjustable squelch with threshold display on the receiver
• Frequency scan in the receiver
• Adjustable AF output
• Adjustable transmission power: 5 mW, 10 mW, 20 mW
• Infrared transfer of the settings from the receiver to the transmitter
• Pilot tone
• Increments of 25 kHz
• Housing: 9.5", 1 U with 2x BNC outputs for antennas
• XLR- and jack output
• Operates with a 12 V, 0.5 A DC power supply (positive polarity (+) inside)
• Transmitter housing: Plastic
• 3-Pin TQG male connector
• LCD display
• Operates with 2x AA batteries or rechargeable batteries (not included)
• Frequency band: 823 - 832 MHz
• Includes a guitar cable, plastic case and rackmount
• Optional antenna converters available under Article Nr 177448 (not included)

• Lavalier Microphone
• Cardioid polar pattern
• 3-Pin Mini XLR connector (AKG compatible!)
• Wind shield included

Note: Suitable for all t.bone radio systems except TWS One, GigA and Column