the t.bone

Bundle offer comprising

• UHF Wireless System
• Includes a pocket transmitter and guitar cable for applications with instruments
• Frequency band: 823-832 MHz
• Frequency response: 60-17,000 Hz
• 10 Preprogrammed frequency groups with 10 available channels each
• Auto squelch
• Frequency scan in the receiver
• Adjustable AF output
• Transmission power: 10 mW
• Infrared transfer of the settings from the receiver to the transmitter
• Pilot tone
• Increments of 80 kHz
• Modulation type: F3E
• LCD Display
• 9.5" 1U housing with 2 x BNC antenna connectors
• XLR- and jack output
• Operates via 12V, 0.5 DC power supply (positive (+) on the inside)
• Transmitter housing material: Plastic
• Operates with 2 x AA batteries or rechargeable batteries
• Include guitar cables, antennas, EU power supply and a rack kit for the installation of a 1U receiver
• Optional antenna converters available under Article Nr 177448 (not included)

Note: Up to 4 systems can be operated in this frequency band simultaneously.

• Headset Microphone
• Lightweight condenser Headset Microphone
• Two earhooks
• Left/right adjustable
• Characteristic: Ball
• 3-pin Mini XLR connector suitable for AKG Bodypack transmitter
• Cable length: Approx. 120 cm
• Colour: Beige / flesh coloured
• Includes cable clip
• Additional draft shield: Article number 355914 (not included)

Bundle offer comprising

• 2.4 GHz Receiver with Flash Shoe Adapter
• Frequency range 2.400 - 2.4835 GHz
• True diversity
• 2 Fixed antennas
• IR port for ACT-Sync function
• Output: 3.5 mm Mini stereo jack
• Operation with 1x lithium battery (ICR 18500)
• Dimensions: 63 x 70 x 25 mm

Note: Worldwide registration and free of charge

• Guitar Transmitter
• Frequency range: 2.400 - 2.4835 GHz
• IR port for ACT-Sync function
• Transmitter operation with 1x lithium battery (ICR 18500) with up to 10 hours battery life
• 24-bit/44.1 KHz
• Robust plastic housing
• Screwable 6.3 mm jack adapter
• Optional cable operation possible
• FSK modulation
• 3-Digit battery indicator
• Flexible stub antenna
• Charging contacts for MP24 battery charging station (not included)
• 10 mW Transmitting power
• Low latency
• Up to 100 m range in free field of vision
• Dimensions (W × H × D, without antenna): 84 x 35 x 29 mm
• Weight: 61 g

• Charger
• Intelligent charger for up to two Li-Ion batteries of sizes 26650, 22650, 18650, 18500, 17670, 16340, 14500 and much more and much more. or to charge 1-2 NiMH Mignon AA / Micro AAA batteries independently
• Individual lot monitoring
• Automatic start of charging upon correct insertion of a battery
• Microcontroller monitored charging control
• Trickle charge for NiMH batteries
• Battery full detection and completion of the charging process
• Display of the charging status over 3 LEDs per loading shaft
• Incldues USB charging cable

Note: USB power supply and batteries not included

• Adapter
• Mini jack female mono -> jack male mono

Bundle offer comprising

• Control Centre for Digital Conference System
• 2 Groups with up to 16 call stations each
• Feedback suppression
• USB recording and playback (
• Configuration via PC or App
• 4 Discussion modes (3, 6, 9 or all microphones can be activated at the same time)
• Tuning mode
• 2 x Stereo Rec Out (RCA)
• 1 x Stereo out for sound system (RCA)
• 1 x Stereo in (RCA)
• 1 x Mic In (XLR with phantom power)
• 1 x LAN
• 1 x RS485 for video tracking
• Build: 19" / 2 U
• Dimensions (W x H x D): 419 x 692 x 583 mm
• Weight: 5.5 kg
• Suitable booster for more than 16 microphone units per line: Art.498125 (not included in delivery)
• Matching case: Art.496024 (not included in delivery)

• Presidential Microphone Unit for Digital Conference Systems
• Condenser microphone
• LCD display
• Buttons: Agree, Drop, Disagree, Priority, +/-
• Built-in loudspeaker with volume control
• Headphone jack
• Priority control specially for the presidential microphone unit
• 2x LAN (In/Link)
• Microphone gooseneck length: Approx. 40 cm
• Dimensions (W x H x D): 169 x 46 x 175 mm
• Weight: 0.7 kg
• Includes a 2 m network cable

• Delegate Microphone Unit for Digital Conference Systems
• Condenser microphone
• LCD display
• Buttons: Agree, Drop, Disagree, +/-
• Built-in loudspeaker with volume control
• Headphone jack
• 2x LAN (In/Link)
• Microphone gooseneck length: Approx. 40 cm
• Dimensions (W x H x D): 169 x 46 x 175 mm
• Weight: 0.7 kg
• Includes a 2 m network cable

• Suitable for freeU HT 863 (article no. 405083 - not included)
• Dynamic capsule
• Supercardioid
• Frequency range: 50 - 16,000 Hz
• 4 Pre-programmed frequency groups with 4 available channels each
• Auto squelch
• Frequency scan in the receiver
• 10 mW transmission power
• Infrared settings transfer from the receiver to the transmitter
• Pilot tone
• 125 kHz grid
• Modulation type F3E
• Dynamic handheld transmitter with metal housing
• LCD display
• Operates on 2 AA batteries or rechargeable batteries
• Frequency band: 863 - 865 MHz

Note: In this frequency band a maximum of 3 systems can be operated simultaneously.

• Polar pattern: Semi-cardioid
• Switchable frequency response for bass drum or piano / voice applications
• Frequency range: 30 - 20,000 Hz
• Impedance: 230 Ohm
• Sensitivity: -53 dB
• Robust metal housing
• XLR male output
• Holes on the back for suspending
• Bottom with 3/8" internal thread and non-slip rubber for stability and to protect sensitive surfaces
• Dimensions: 95 x 123 mm
• Weight: 480 g

• Suitable for all ears via flexible mounting
• With condenser capsule
• Characteristic: Omnidirectional
• Connector: Sennheiser EW plug
• Cable length approx. 120 cm
• Colour: Beige
• Incl. Cable clip and foam windshield
• Optional replacement windshield: Article Nr 355914

Bundle offer comprising

• Wireless Systems for Guitar and Bass
• UHF wireless system with a pocket transmitter
• 14 Pre-programmed frequency groups with 15 available channels each
• 1 User channel
• Adjustable squelch with threshold display on the receiver
• Frequency scan in the receiver
• Adjustable AF output
• Adjustable transmission power: 5 mW, 10 mW, 20 mW
• Infrared transfer of the settings from the receiver to the transmitter
• Pilot tone
• Increments of 25 kHz
• Housing: 9.5", 1 U with 2 BNC outputs for antennas
• XLR- and jack output
• Operates with 12 V, 0.5 DC power supply (positive polarity (+) on the inside)
• Transmitter housing: Plastic
• 3 TQG male connector
• LCD display
• Operates with 2 AA batteries or rechargeable batteries (not included)
• Frequency band: 596 - 620 MHz
• Includes a guitar cable, plastic case and rackmount
• Optional antenna converters available under Article Nr 177448 (not included)

• Headset Microphone
• Lightweight condenser Headset Microphone
• Two earhooks
• Left/right adjustable
• Characteristic: Kidney
• Frequency range: 50 - 20000 Hz
• Sensitivity: 4.4 mV / Pa, -47.2 dB re 1 V / Pa
• Sound pressure level limit: 115 dB
• Impedance: 750 Ohm
• 3-pin Mini XLR connector suitable for AKG Bodypack transmitter
• Cable length: Approx. 120 cm
• Colour: Beige / flesh coloured
• Includes cable clip
• Additional draft shield: Article number 355914 (not included)

• Clip-on microphone for brass and woodwind instruments
• For use with the t.bone GigA Pro GT (Article Nr. 453986, not included) or for expansion of an already existing GigA Pro system
• Condenser capsule (10 mm)
• Cardioid characteristic
• Frequency range: 65 - 20000 Hz
• Sensitivity: -52 dB
• Maximum sound pressure level: 142 dB (SPL)
• Output: 3.5 mm mini jack socket with thread
• Dimensions (Ø x L): 10 x 197 mm
• Weight: Approximately 57 g
• Colour: Black

• 1.07" Gold membrane
• Super warm sound
• Directional characteristic: Cardioid
• Frequency profile: 20 / 20,000 Hz
• Output Impedance: 200 Ohm
• Sensitivity: 36 +/- 2 dB (0 dB-1V/Pa 1000 Hz)
• Incl. transport case, windscreen, shock mount and external power supply
• Dimensions: 59 x 180 mm
• Suitable cable between microphone and power supply included

Bundle offer comprising

• Wireless Systems for Guitar and Bass
• UHF wireless system with a pocket transmitter
• 14 Pre-programmed frequency groups with 15 available channels each
• 1 User channel
• Adjustable squelch with threshold display on the receiver
• Frequency scan in the receiver
• Adjustable AF output
• Adjustable transmission power: 5 mW, 10 mW, 20 mW
• Infrared transfer of the settings from the receiver to the transmitter
• Pilot tone
• Increments of 25 kHz
• Housing: 9.5", 1 U with 2 BNC outputs for antennas
• XLR- and jack output
• Operates with 12 V, 0.5 DC power supply (positive polarity (+) on the inside)
• Transmitter housing: Plastic
• 3 TQG male connector
• LCD display
• Operates with 2 AA batteries or rechargeable batteries (not included)
• Frequency band: 596 - 620 MHz
• Includes a guitar cable, plastic case and rackmount
• Optional antenna converters available under Article Nr 177448 (not included)

• Condenser ?lip Microphone for Ovid System
• Directional characteristic: Cardioid
• Frequency response: 20 - 20,000 Hz
• Flexible gooseneck for an easy instrument setup
• 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)
• Gooseneck length: 130 mm
• Cable length: 2 m
• Easy to install and can be used with different instrument clips (not included, must be ordered separately)
• Includes an XLR phantom power adapter (phantom power required) and a foam windshield

• Modular saxophone microphone clip for Ovid systems
• Easy to install without tools
• Black rubber end caps protect the instrument from damage
• Locking screw
• Also suitable for trumpet, trombone etc.
• Not suitable for soprano saxophone

Bundle offer comprising

• Condenser Shotgun Microphone
• Ideal for video, voice, overhead and choir recording
• Polar pattern: Super-cardioid
• Frequency range: 60 - 18,000 Hz
• +48 V phantom power or 1.5 V battery
• Aluminium housing
• XLR jack
• Dimensions: 22 x 320 mm
• Weight: 130 g

Accessories included:

• 6 m cable
• Windshield
• Microclamp with hot shoe adapter and 5/8" thread
• Thread adapter to 3/8"

• Elastic microphone Mount
• For mounting microphones on cameras
• Suitable for all standard cameras
• With shoe mount adapter
• Suitable for microphones with diameter of 12-30 mm

Bundle offer comprising

• Condenser ?lip Microphone for Ovid System
• Directional characteristic: Cardioid
• Frequency response: 20 - 20,000 Hz
• Flexible gooseneck for an easy instrument setup
• 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)
• Gooseneck length: 130 mm
• Cable length: 2 m
• Easy to install and can be used with different instrument clips (not included, must be ordered separately)
• Includes an XLR phantom power adapter (phantom power required) and a foam windshield

• Modular cello microphone holder for Ovid System
• Easy installation without tools
• Black rubber end caps protect the instrument from damaging
• Set screw
• Width: 59 mm

• Plastic Case
• With recess for all Ovid system microphone clamps and the CC 100 microphone
• Outer Dimensions: 30 x 23 x 7.5 cm

• Easy installation with different instrument holders (optional - not included)
• With phantom power adapter (phantom power required)
• Detachable cable with screw contact
• Directivity: Cardioid
• Frequency range: 20 - 20,000 Hz
• Flexible gooseneck for easy alignment on the instrument
• 3-Pin mini XLR connector for operating with t.bone wireless systems - also suitable for AKG wireless systems
• Length of gooseneck: 130 mm
• Cable length: 1.2 m
• Optional cables with Sennheiser EW and Shure TQG connector available separately (not included)
• Foam windshield included

• Heavy duty version
• Suitable for CC 100 RC microphones with screw contact
• With 4-pin mini XLR connector for use with Shure wireless systems
• Cable diameter: 2 mm
• Cable length: 2 m
• Colour: Black

Bundle offer comprising

• 16 Channel UHF Wireless System
• 9.5" Diversity receiver
• Bodypack (line / mic switchable), with 3-pin mini XLR connection (AKG compatible)
• 16 Switchable channels (821.725 MHz - 831.450 MHz)
• 4 Sets can be used at the same time
• Adjustable squelch
• XLR and jack output
• External power adapter (DC 12V / 500mA)
• Included accessories: 9.5" Rack mount (can be used in conjunction with a second TWS16 as a 19" / 1 U rack mount)
• Jack output cable: 1 m
• Guitar cable: 1 m

• Microphone with Earset
• With L-connector (3-pin mini XLR) for all AKG wireless systems
• Medium sensitivity
• Directional characteristic: Omnidirectional
• Frequency response: 50 - 20,000 Hz
• Weight: 13 g
• Colour: Beige
• Suitable replacement windscreen available under Article Nr 185514 (not included, must be ordered separately)

• The compact size is perfect for mobile applications such as interviews, micro-video recording, vlogging
• The transmitter can be used with an integrated microphone or an external microphone
• Distortion-free signal transmission
• Range: 50 m (in line of sight) / 30 m (not in line of sight)
• Running time: 5 hours
• Charging time: 1.5 hours
• Switchable low-cut filter
• Auto pairing
• Built-in lithium battery (400 mAh)
• Latency: 12.5 ms
• Clip for attaching to belt or clothing - also suitable for attaching to flash shoe
• Headphone output for real-time monitoring: 3.5 mm TRS jack
• Recording output: 3.5 mm TRS jack
• Microphone input: 3.5 mm jack TRS
• Dimensions: 52 x 42 x 16 mm each
• Weight without external microphone: 35 g each
• Colour: Black

Set Consists Of:

• 1x Transmitter
• 1x Receiver
• 1x External lavalier microphone with windscreen
• 1x Spiral cable 3.5 mm TRS to TRS Camera
• 1x Phone cable 3.5 mm TRS to TRRS
• 1x Fur windscreen
• 1x Charging cable 1 USB A to 2x USB C

• Suitable for all ears due to flexible suspension
• Condenser capsule
• Polar pattern: Cardioid
• Frequency range: 50 - 20,000 Hz
• 4.4 mV / Pa
• -47.1 dB re 1 V / Pa
• Sound pressure level limit: 115 dB
• Impedance: 750 Ohm
• 3-pin Mini XLR connector suitable for AKG Bodypack transmitter
• Colour: Beige
• Cable length approx. 120 cm
• Includes cable clip and foam windscreen

• With recess for all Ovid System microphone mounts and the CC 100 microphone
• External dimensions approx: 30 x 20 x 8.5 cm

Bundle offer comprising

• UHF Wireless System
• Includes a pocket transmitter with a guitar cable for applications with instruments
• Frequency band: 606 - 630 MHz
• Frequency range: 60 - 17,000 Hz
• 10 Pre-programmed frequency groups with 10 available channels each
• Auto squelch
• Frequency scan in the receiver
• Adjustable AF output
• Transmission power: 30 mW
• Infrared transfer of the settings from the receiver to the transmitter
• Pilot tone
• Increments of 200 kHz
• Modulation type: F3E
• LCD display on the receiver
• Housing: 9.5", 1U with 2 BNC connectors for antennas
• XLR- and jack output
• Operates with 12 V, 0.5 DC power supply (positive (+) polarity inside)
• Transmitter housing: Plastic
• Transmitter features an LCD display
• Operates with 2 AA batteries or rechargeable batteries
• Includes guitar cables, antennas, EU power supply and a rack kit for the installation of an 1 U receiver

Note: A maximum of up to 6 systems can be operated simultaneously in this frequency band.

• Lightweight condenser lavalier microphone
• For speaking and music uses
• Omnidirectional polar pattern
• 50 - 20,000 Hz
• 2.7 mV / Pa
• -51.2 dB re 1 V / Pa
• 125 dB SPL max.
• 300 Ohm
• 3-Pin TQG connector for AKG and t.bone wireless system
• Colour: Beige
• Cable length approx. 120 cm
• Incl. Cable clip and wind shield

Bundle offer comprising

• Condenser instrument microphone
• Easy installation with various instrument holders for many different instruments (not included)
• Flexible gooseneck 120 mm for easy alignment on the instrument
• Detachable cable with screw contact
• 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)
• Polar pattern: Cardioid
• Frequency range: 30 - 20.000 Hz
• Sensitivity: -38 dB +/- 2 dB
• Max. SPL: 130 dB
• Signal-to-noise ratio: 71 dB
• Impedance 100 Ohm
• Distortion factor:
• Cable length approx. 2 m
• Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)
• Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm

• Microphone Mount
• Tripod clip for the Lucan System CC 200 RC
• Suitable for screwing onto all stands with a standard 5/8" thread