Tone King

• 1 Channel
• Power: 20 W
• 3-Position voicing switch (rhythm, tweed, lead) for authentic 50s and 60s vintage sounds
• Integrated Ironman II reactive power attenuator (up to -36 dB) with a precision tuned reactive load, Fletcher Munson volume compensation circuitry, and damping factor correction
• Equipped with 1x 12" speaker, custom designed by Eminence
• Preamp tubes: 2x 12AX7A
• Power tubes: 2x 5881
• Housing design: Open
• Controls: Volume - Tone - Reverb Dwell - Reverb Mix - Attenuation Level
• 3-Way sound switch: Rhythm, Tweed, Lead
• Integrated reverb
• Connections: Hi & Lo input (2x 6.3 mm jack) - Footswitch input (4-pin XLR)
• Dimensions (W x D x H): 572 x 483 x 279 mm
• Weight: 15.4 kg
• Colour: Turquoise
• Includes a 4-way footswitch
• Made in the USA

• Integrated Ironman II compensated power attenuator (up to -36 dB)
• Channels: 2
• Power: 20 W
• Preamp tubes: 3x 12AX7A
• Power tubes: 2x 6V6
• Equipped with: 1x 12" Custom designed 8 ohm ceramic magnet speaker from Eminence
• Attenuator features: Precision Tuned Reactive Load, Fletcher-Munson Volume Compensation Circuitry, Damping factor correction
• 5AR4 Rectifier tube
• 12AT7 Reverb driver tube
• 12AX7A Reverb receiver tube
• Housing design: open
• Controls on the rhythm channel: Vol, Treb, Bass
• Lead channel: Vol, Tone, Mid-Bite
• Reverb
• Tremolo speed ??& depth
• Attenuation level control
• Switches: channel selector (switchable via the front-, or footswitch), power on/off, standby, rhythm channel
• Attenuator bypass & HF compensation
• Effects: spring reverb tubes
• Hi & Lo input: 2x 6.3 mm jack
• Speaker: 6.3 mm jack
• Footswitch input: 6.3 mm stereo jack
• Power supply (cold device plug)
• Dimensions (W x D x H): 572 x 489 x 267 mm
• Weight: 16.4 kg
• Colour: Tweed
• Includes a 2-way footswitch (channel, tremolo)
• Made in the USA

• Full tube combo with reverb, tremolo and two built-in power reducers (attenuators)
• 2 Channels
• Power: 35W
• Equipped with: 1x 12" Celestion Custom Voiced "Tone King 1660" speaker
• Preamp tubes: 4x 12AX7, 1x 12AT7
• Power tubes: 2x 6L6GC
• Rectifier tube: 5AR4
• Open housing
• Knob rhythm channel: Volume, treble and bass
• Controller lead channel: Volume, tone and mid bite
• Further controls: Reverb Level, Tremolo Rate and Depth, Attenuation level (Rhythm), Attenuation Level (Lead)
• Switch: Lead / Rhythm Chanel, Mode Ultra Linear / Pentode, Impedance 8/16 Ohm
• Effects: Reverb, tremolo
• Input: 6.3 mm Jack
• Dimensions (W x D x H): 610 x 305 x 457 mm
• Weight: 27.2 kg
• Colour: Turquoise
• Includes 2-fold footswitch
• Made in USA

Tone King Imperial Mk II CR; tube combo amplifier for electric guitar; built-in Ironman II compensated power attenuator (to -36dB) attenuator design features: precision tuned reactive load, Fletcher Munson volume compensation circuitry, damping factor correction; 5AR4 rectifier tube; 12AT7 reverb driver tube; 12AX7A reverb receiver tube; channels: 2; power: 20 watts; pre-amp tubes: 3 x 12AX7A; power-amp tubes: 2 x 6V6; equipped with: 1 x 12" Custom designed made by Eminence 8 Ohms Ceramic Magnet speakers; cabinet construction: open back; controls: Rhythm Channel: Vol, Treb, Bass - Lead Channel: Vol, Tone, Mid-Bite - Reverb - Tremolo Speed & Depth - Attenuator: Attenuation Level; switches: Chanel select (selected by front panel switch or footswitch), Power On/Off, Standby, Rhythm Ch. Attenuator Bypass & HF Kompensation; effects: tube driven spring reverb; connections: Hi & Lo Input (2 x 1/4" Jack - Speaker (1/4" Jack) - Footswitch in (1/4" TRS-Jack) - power inlet (C14 IEC plug); dimensions (W x D x H): 572 x 489 x 267 mm; (22,5" x 19,25" x 10,5"); weight: 16,4 kg (36,2 lbs); included: Two button footswitch (channel; tremolo); color: cream; made in USA

• Integrated Ironman II compensated power attenuator for an optimised sound at any volume (up to -36 dB)
• The Reactive Load Technology maintains the feel and response of your guitar amplifier
• 2 Channels
• Power: 20 W
• Preamp tubes: 3 x 12AX7A
• Power amp tubes: 2 x 6V6
• Rectifier tube: 5AR4
• Reverb driver tube: 12AT7
• Reverb receiver tube: 12AX7A
• Rhythm Channel controls: Vol, Treb, Bass
• Lead Channel controls: Vol, Tone, Mid-Bite
• Reverb control
• Tremolo speed and depth control
• Attenuator: Attenuation level
• Channel selector switch - channel switchable by front or foot switch
• Power On/Off
• Standby
• Rhythm Channel Bypass/Enable
• Attenuator HF compensation
• Effects: Tube spring reverb and bias modulated tremolo
• Speaker outputs: 8 - 16 Ohms - 6.3 mm jack
• Input: 6.3 mm jack
• Footswitch input: 6.3 mm stereo jack
• Dimensions (W x D x H): 572 x 229 x 267 mm
• Weight: 11.3 kg
• Colour: Brown
• Includes 2-way foot switch (channel selection and tremolo)
• Made in USA

• 1 Channel
• Power: 5 Watt
• Equipment: 1x 12" Custom-voiced Celestion 870 speaker
• Offers turned up Blackface or Tweed guitars sound at a reduced volume
• Lead and rhythm input, which can be bridged with A/B/Y foot switch (not included)
• Integrated Ironman II attenuator with reactive load that responds to signal and volume input
• Preamp tubes: 2x 12AX7
• Power stage tubes: 1x KT66
• Housing construction: Open regulator
• Controller: Volume - tone - attenuation
• Switch: Power on/off
• Connectors: Rhythm & lead input (6.3 mm jack) - line out (6.3 mm jack)
• Dimensions (W x D x H): 483 x 254 x 432 mm
• Weight: 12.7 kg
• Colour: Turquoise
• Made in USA

• Offers turned up Blackface- or Tweed guitars sounds at reduced volume
• Inputs can be bridged with an optional A/B/Y foot-switch (not included)
• Bbuilt-in Ironman II attenuator with one Reactive Load
• Channels: 1
• Power: 5 Watt
• Preamp tubes: 2x 12AX7
• Power stage tubes: 1x KT66
• Loudspeaker equipment: 1x 12" Custom-voiced Celestion 870
• Open housing
• Controllers: Volume, Tone, Attenuation
• Switch: Power On/Off
• Rhythm & Lead input: 6.3 mm Jack
• Line output: 6.3 mm Jack
• Dimensions (W x D x H): 483 x 254 x 432 mm
• Weight: 12.7 kg
• Colour: Cream
• Made in USA

• Full tube compression at room volume
• Reactive Load Technology preserves the tone and dynamics of the amp
• Footswitchable 3 dB / 6 dB solo function
• 6-Level damping provides volume settings for every performance, session or home
• 3-Position presence switch tames unwanted highs
• XLR DI Out with Speaker Simulation
• Power rating: 100 W RMS
• Can be used as a dummy load to provide a correct load for your amplifier without speakers being connected
• Impedance: 4, 8 or 16 ohms
• Control: Attenuation
• Switches: Range Hi / Lo, Solo On / Off, Presence 0 / -3db / -6dB, Impedance, DI Level -10 / -30 dB, Axis Cone / Edge, Ground Lift
• LED: Solo On
• Dimensions (W x D x H): 241 x 260 x 95 mm
• Weight: 6.8 kg
• Includes 12 V DC power supply and foot switch (solo on / off)
• Made in USA

Connections:

• Amplifier input: 6.3 mm jack
• Speaker output: 2x 6.3 mm jack
• Line Out: 6.3 mm jack
• Line Out: 6.3 mm jack
• DI Out: XLR
• Solo footswitch connection: 6.3 mm jack
• Power supply connection: coaxial connection 5.5 x 2.1 mm, negative polarity inside

• Integrated Ironman II Compensated Power Attenuator (up to -36 dB)
• Channels: 2
• Power: 20 W
• Preamp tubes: 3 x 12AX7A
• Power amp tubes: 2 x 6V6
• Equipped with: 1 x 12" Custom designed made by Eminence 8 Ohm Ceramic Magnet speaker
• Attenuator features: Precisely tuned reactive load, Fletcher Munson volume compensation circuit, damping factor correction
• 5AR4 rectifier tube
• 12AT7 Reverb driver tube
• 12AX7A Reverb receiver tube
• Cabinet construction: Open
• Rhythm Channel control: Vol, Treble, Bass
• Lead Channel: Vol, Tone, Mid-Bite
• Reverb
• Tremolo Speed & Depth
• Attenuation level control
• Switches: Channel selector switch (switchable by front or foot switch), power on / off, standby, Rhythm Ch
• Attenuator bypass & HF compensation
• Effects: Tubes spring reverb
• Hi & Lo input: 2x 6.3 mm jack
• Speaker: 6.3 mm jack
• Footswitch in: 6.3 mm stereo jack
• Power connection (IEC socket)
• Dimensions (W x D x H) 572 x 489 x 267 mm
• Weight: 16.4 kg
• Colour: Turquoise
• Includes 2-way foot switch (channel, tremolo)
• Made in USA

• 2 Channels
• Power: 20 W
• Equipped with: 1 x 12" Custom 8 Ohm Ceramic Magnet, designed and made by Eminence
• Integrated Ironman II Compensated Power Attenuator (up to -36 dB) with precisely matched reactive load, Fletcher Munson volume compensation circuit and damping factor correction
• Open housing
• Rhythm Channel controls: Volume, Treble, Bass
• Lead Channel controls: Volume, Tone, Mid-Bite
• Reverb, tremolo speed and tremolo depth controls
• Attenuator level control
• Channel selection switchable via front or foot switch
• Rhythm Channel switch
• Attenuator bypass and HF compensation
• Effects: Tubes spring reverb
• Connectors: Hi & Lo input (2x 6.3 mm jack), speaker (6.3 mm jack), footswitch in (6.3 mm stereo jack) and power connection (IEC connector)
• Dimensions (W x D x H) 572 x 489 x 267 mm
• Weight: 16.4 kg
• Colour: Brown
• Includes 2-way foot switch for channel and tremolo
• Made in USA

Tubes:

• Rectifier tube: 5AR4
• Reverb driver tube: 12AT7
• Reverb receiver tube: 12AX7A
• Preamp tubes: 3x 12AX7A
• Power amp tubes: 2x 6V6

• 1 Channel
• Power: 5 W
• Equipped with: 1x 12" Custom voiced Celestion 870 speaker
• Offers cranked-up Blackface or Tweed guitar sounds at reduced volume levels
• 2 Inputs, also bridgeable via optional A/B/Y foot-switch (foot-switch not included)
• Built-in Ironman II Attenuator with Reactive Load which reacts just like the amp at any volume to get the same sound
• Preamp tubes: 2x 12AX7
• Power stage tubes: 1x KT66
• Controls: Volume - Tone - Attenuation
• Switch: Power on/off
• Connectors: Rhythm & Lead Input (6.3 mm jack) and Line Out (6.3 mm jack)
• Open housing
• Dimensions (W x D x H): 483 x 254 x 432 mm
• Weight: 12.7 kg
• Colour: Black
• Made in USA

• 1 Channel
• Power: 20 watts
• Equipped with: 1x 12" Custom Designed by Eminence speakers
• Integrated Ironman II Compensated Power Attenuator (up to -36dB) with precisely tuned reactive load, Fletcher Munson volume
• Compensation circuit & damping factor correction
• 3-Position voicing control for rich, authentic 50s and 60s vintage sounds
• Preamp tubes: 2x 12AX7A
• Power amp tubes: 2x 5881
• Controls: Volume, Tone, Reverb Dwell, Reverb Mix, Attenuation Level
• Tone switch: Rhythm / Tweed / Lead
• Effects: Reverb
• Hi & Lo input: 2x 6.3 mm jack
• Footswitch input: 4-pin XLR
• External loudspeaker output (min. 8 ohms): 1x 6.3 mm jack
• Dimensions (W x D x H): 572 x 483 x 279 mm
• Weight: 15.4 kg
• Includes 4-way foot switch
• Made in USA

• 2 Channels
• Power: 20 W
• Integrated Ironman II Compensated Power Attenuator for an excellent sound at any volume (up to -36 dB)
• The Reactive Load Technology maintains the feel and response of your guitar amplifier
• Preamp tubes: 3 x 12AX7A
• Power amp tubes: 2 x 6V6
• Rectifier tube: 5AR4
• Reverb driver tube: 12AT7
• Reverb receiver tube: 12AX7A
• Rhythm Channel control: Vol, Treb, Bass
• Lead Channel control: Vol, Tone, Mid-Bite, Reverb, Tremolo Speed and Depth
• Attenuator: Attenuation level
• Switches: Channel selector switch (switchable on front panel or foot switch), Power On/Off, Standby, Rhythm Ch. Attenuator Bypass and HF Compensation
• Effects: Tube spring reverb, bias modulated tremolo
• Speaker outputs: 8 - 16 Ohms (6.3 mm jack)
• Input: 6.3 mm jack
• Footswitch: 6.3 mm stereo jack
• Dimensions (W x D x H): 572 x 229 x 267 mm
• Weight: 11.3 kg
• Colour: Black
• Includes 2-way foot switch (channel, tremolo)
• Made in USA

• 1 Channel
• Power: 20 W
• 3-Position voicing switch for authentic 50s and 60s vintage sounds
• Integrated Ironman II reactive power attenuator (up to -36 dB) with a precision tuned reactive load, Fletcher Munson volume compensation circuitry, and damping factor correction
• Equipped with 1x 12" speaker, custom designed by Eminence
• Preamp tubes: 2x 12AX7A
• Power tubes: 2x 5881
• Controls: Volume - Tone - Reverb Dwell - Reverb Mix - Attenuation Level
• 3-Way sound switch: Rhythm, Tweed, Lead
• Power on/off
• Standby switch
• Integrated reverb
• Hi and Lo input: 2x 6.3 mm jack
• Footswitch input: 4-pin XLR
• External speaker output (min. 8 ohm): 1x 6.3 mm jack
• Dimensions (W x D x H): 572 x 483 x 279 mm
• Weight: 15.4 kg
• Colour: Cream
• Includes a 4-way footswitch
• Made in the USA

• 2 Channels
• Power: 20 watts
• Handwired
• Integrated Ironman II Compensated Power attenuator for excellent sound at any volume (up to -36 dB)
• The Reactive-Load technology keeps the feel and response of your guitar amp
• Preamp tubes: 3x 12AX7A
• Power tubes: 2x 6V6
• Rectifier tube: 5AR4
• Reverb driver tube: 12AT7
• Reverb receiver tube: 12AX7A
• Rhythm channel controls: Vol, Treb, Bass
• Lead channel controls: Vol, Tone, Mid-Bite, Reverb, Tremolo Speed ​​& Depth
• Attenuator: Attenuation Level
• Switch: Channel selector switch (switchable by front or foot switch), Power On / Off, Standby, Rhythm Ch. Attenuator Bypass & HF Compensation
• Effects: Tubes Spring Reverb, Bias Modulated tremolo
• Speaker outputs: 8 - 16 ohms (6.3 mm jack)
• Hi & Lo input: 2x 6.3 mm jack
• Footswitch input: 6.3 mm stereo jack
• Dimensions (W x D x H): 572 x 229 x 267 mm
• Weight: 11.3 kg
• Colour: Turquoise
• Includes 2-way footswitch (channel, tremolo)
• Made in USA

• Channels: 2
• Power: 20 W
• Components: 1x 12" Custom-designed 8 ohm ceramic magnet speaker made by Eminence
• Rectifier tube: 5AR4
• Reverb driver tube: 12AT7
• Reverb receiver tube: 12AX7A
• Preamp tubes: 3 x 12AX7A
• Power tubes: 2 x 6V6
• Integrated Ironman II compensated power attenuator (up to 36 dB)
• Attenuator features: Precision Tuned Reactive Load, Fletcher-Munson Volume Compensation Circuitry, Damping factor correction
• Housing design: Open
• Controls on the rhythm channel: Vol., Treb., Bass
• Lead channel: Vol., Tone, Mid-Bite
• Reverb - Tremolo Speed ??& Depth - Attenuator: Attenuation Level
• Channel selector (switchable via the front- or footswitch)
• Power on/off switch
• Standby switch
• Rhythm channel switch
• Attenuator bypass & HF compensation
• Effects: Spring reverb tubes
• Hi & Lo input: 2x 6.3 mm Jack
• Speaker output: 6.3 mm Jack
• Footswitch input: 6.3 mm Stereo jack
• Power supply (cold device plug)
• Dimensions (W x D x H): 572 x 489 x 267 mm
• Weight: 16.4 kg
• Colour: Black
• Includes a 2-way footswitch (channel, tremolo)
• Made in the USA

• 1 Channel
• Power: 5 W
• Produces cranked up Blackface or Tweed guitar sounds at reduced volume
• Built-in Ironman II Attenuator with a Reactive Load, which reacts just like the amplifier to produce the same sound at any volume, whether you are playing live or quietly
• Inputs with optional A / B / Y footswitch bridgeable (not included)
• Equipped with: 1 x 12" Custom Voiced Celestion 870 speaker
• Preamp tubes: 2 x 12AX7
• Power amp tube: 1 x KT66
• Open housing construction
• Controls: Volume, tone and attenuation
• Switches: Power On / Off
• Input: Rhythm and Lead (6.3 mm jack)
• Line-output 6.3 mm jack
• Dimensions (W x D x H): 483 x 254 x 432 mm
• Weight: 12.7 kg
• Colour: Brown / Beige
• Made in USA

• Drive your tubes to their limits at bedroom volume
• With Reactive Load technology, it maintains the tone and dynamics of your rig
• Foot-switchable 3dB / 6dB solo function
• For amplifiers with a maximum power of 30 W
• 6-Level attenuation offers volume settings for any performance, session or jam
• 3-Position presence switch tames unwanted trebles
• Controls: Attenuation
• Switch: Range Hi/Lo - Presence 0/-3 dB/-6 dB
• LED: Solo on
• Impedance: 8 Ohm
• Footswitch: Solo
• Amplifier input: 6.3 mm jack
• Speaker output: 6.3 mm jack
• Line out: 6.3 mm jack
• Power adapter connector (coaxial socket 5.5 x 2.1 mm - negative pole inside)
• Power supply (only for the LED) via two AA batteries or a 9 V DC power supply (not included, suitable power supply available under article no. 409939)
• True bypass
• Dimensions (W x D x H): 191 x 203 x 76 mm
• Weight: 1.36 kg
• Made in USA