Tube-Tech

• Clickless bypass relay
• Push Pull Type Tube Gain Stage
• Format: 19 "/ 3U

• Mic gain adjustable in 2 dB and 10 dB steps
• Selectable mic impedance: 600/1200/2400 Ohm
• Switchable 20 dB PAD
• Phase reversal
• High pass filter: 20 Hz / 40 Hz
• High-impedance instrument input (DI) with gain range of +10 dB to +60 dB
• Overload indicator (red LED) per channel
• Phantom power + 48V
• Frequency range @ -3 dB: 5 Hz to 60 kHz
• DI Input impedance > 1 MOhm
• CMRR > 60 dB @ 10 kHz
• Design: 19" / 2 U

• Mastering version of the stereo equalizer
• Clean stereo matching and reproducibility thanks to tap switches instead of potentiometers
• Reduced boost / cut to +/- 7 dB for more precise settings of the shelving filter
• High-Shelf and Low-Shelf Gain with 23-stage rotary switches
• Low and high-cut filters with 6 switching stages each
• All other potentiometers in rasterized version
• Extremely low tolerances

Features:

• Mastering version of the 2-channel / stereo EQ
• Active high and low-shelf EQ via high-gain tube amplifier
• Low-shelving: 18, 37, 80, 180, 370, 800 Hz with +/- 7 dB gain
• High-shelving: 1,000, 2,000, 5,000, 10,000, 15,000, 22,000 Hz with +/- 7 dB gain
• T filter (EQ rocker) with selectable center frequency (between 0.5 - 2 kHz)
• T-filter lowering by max. 7.5 dB, increase by max. 4 dB
• Variable highpass with 5 frequencies and bypass: 18, 25, 40, 60, 85 Hz
• Variable low-pass with 5 frequencies and bypass: 12,000, 15,000, 18,000, 20,000, 25,000 Hz
• Frequency response (-3dB): 5 - 55,000 Hz
• Noise ratio (Rg = 200?): 22 22,000 Hz
• THD + n @ 40 Hz: 10 dBU
• Headroom (1% THD + n)> +27 dBU
• Balanced XLR inputs and outputs
• Dimensions: 19 "/ 2U with 165 mm depth
• Weight: 4.3 kg

• Optical gain reduction element
• Channels for linkable stereo operation
• Dual VU meters for indicating output level or compression
• Adjustable output level
• Frequency response: 5 - 60,000 Hz
• Noise-free bypass via relay
• Gold-plated switches
• Conductive plastic potentiometer
• Inputs and outputs: XLR balanced
• Dimensions: 19" x 2U x 205 mm
• Weight: 5.8 kg

• Active high & low-shelf EQ via high-gain tube amplifier
• Low-shelving: 20 Hz, 40 Hz, 80 Hz, 160 Hz, 320 Hz, 640 Hz with +/- 12 dB gain
• High-shelving: 1 kHz, 2 kHz, 5 kHz, 10 kHz, 15 kHz, 22 kHz with +/- 12 dB gain
• T filter (EQ rocker) with selectable center frequency: 0.5 kHz, 1 kHz, 2 kHz
• Variable highpass with 5 frequencies and bypass: 18 Hz, 25 Hz, 40 Hz, 60 Hz, 85 Hz
• Variable low-pass with 5 frequencies and bypass: 12 kHz, 15 kHz, 18 kHz, 20 kHz, 25 kHz
• Frequency response (-3dB): 5 Hz - 55 kHz
• Signal to noise ratio (Rg = 200 Ohm): 22 Hz - 22 kHz
• THD + n @ 40 Hz: 10 dBU
• Headroom (1% THD + n):> + 26 dBU
• Balanced XLR inputs and outputs
• Format: 19 "/ 2 U
• Depth: 165 mm
• Weight: 4.3 kg

• Three Compressor bands per channel
• Variable X-over networks between the bands
• Adjustable Ratio, Threshold, Attack, Release and Output per band
• Separate side chain per band (but channels 1 and 2 are joint)
• The SMC 2A can also be used as a 3-band equalizer

• VU-meter for input monitoring
• Output and Gain Reduction
• One tube each on the input and output levels
• Frequency response @ -3 dB: 5 Hz to 25 kHz
• Clickless in / out switch
• Balanced XLR input and output
• Linkable with another CL1-B
• 19" / 3U

• Both channels can be separately adjusted
• Bypass circuits are separate for compressor and limiter
• Design: 19" / 2U

• Optical compressor
• Variable attack and release
• Ratio of 1.5:1 to 10:1
• Equaliser band filter with 12 frequencies
• Adjustable gain from +20 dB to +70 dB
• Phantom Power
• Low cut filter

• Passive, all-tube midrange EQ based on the legendary Pultech MEQ5
• Weight: 3.8 kg
• Dimensions: 19" / 2U

• Both channels can be separately adjusted
• Bypass circuits are separate for compressor and limiter
• Design: 19" / 2U