Warm Audio

• Gold-coated large-diaphragm capsule in K47 design
• TAB spark unit (AMI) USA output transformer
• High-quality Fairchild transistors
• Wima and polystyrene capacitors
• Polar pattern: Cardioid
• Limiting sound pressure level: 137 dB, 147 dB with activated 10 dB pad
• Frequency response: 40 - 16.000 Hz
• Output impedance: 150 Ohm
• Pads and filters: -10dB pad
• 140 Hz low-cut filter
• Microphone dimensions (H x D): 203 x 70 mm
• Weight: 0.9 kg

• Discrete Class A circuit
• Carnhill transformer
• 80 dB gain
• Incremented potentiometer
• Tone button for switching the input impedance
• Switch for phase reversal
• Low-cut filter 4-step switchable: 50, 80, 160, 300 Hz
• 3-Band induction coil EQ low-band Boost/Cut: 35, 60, 110, 220 Hz
• Mid-band Boost/Cut: 360, 700, 1600, 3200, 4800, 7200 Hz
• Treble-band Boost/Cut: 10, 12, 16 kHz
• Additional treble band EQ points
• LED meter
• 48V Phantom power
• Integrated 115 / 230V power supply
• Build: 19" / 2 U

Connections:

• 2 Microphone inputs: XLR
• 2 Line inputs: 6.3 mm jack
• 2 Instrument inputs: 6.3 mm jack
• 2 Insert inputs and outputs: 6.3 mm jack
• 2 Line outputs: XLR and 6.3 mm jack

• Double-diaphragm capsule in CK12 design
• TAB spark unit (AMI) USA output transformer
• High-quality 12AY7 vacuum tube
• Polar patterns: 9 Polar patterns - Cardioid, Omnidirectional, Figure-8, + 6 additional mixing patterns
• Limiting sound pressure level: 149 dB
• Frequency response: 30 - 20.000 Hz
• Output impedance: 200 Ohm
• ON / self-noise: 32dBA
• Dimensions (H x D): 295 x 50 mm
• Weight microphone: 1.1 kg
• Incl. power supply and 7-pin microphone cable

• 100% discrete, transformer-balanced circuit
• Altran USA Custom wrapped premium input and output transformers
• X520 operational amplifiers in each channel (exchangeable if required, as plugged on base)
• 65 dB gain
• Transmitter-balanced XLR and active instrument inputs
• Transformer-balanced XLR and jack outputs
• TONE switch changes the impedance of the microphone and instrument preamp from 600 to 150 ohms
• -20 dB pad (affects microphone and instrument preamps)
• +48 V phantom power
• LED metering
• Output-Trim control for precise volume control and saturation effects
• Internal power supply
• Format: 19 "/ 1U

• Discrete construction
• Transformerless FET version of the renowned '47 classic
• Gold-coated double large diaphragm
• Switchable polar pattern: cardioid, ball, eight
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 138 dB (A)
• Max. SPL: 147/157 dB SPL (@ 1 kHz 1k Ohm 0.5% THD 0 / -10 dB)
• Noise: 9 dB (A)
• Output impedance: max. 100 ohms
• Output: 16 dBu @ 1 kHz 1k ohms
• 0.5% THD
• LoCut: 70 Hz
• Pad: -10 dB
• Requires 48 V phantom power
• Including elastic suspension, microphone holder and storage bag
• Dimensions (Ø x length): 52 x 210 mm
• Weight: 0.5 kg

• With gain modification for level adjustments of two devices
• CineMag input and output transformer - made in the USA
• Premium 12AX7 and 12AU7 tubes
• CineMag inductor EQ section
• The EQ section can be set to bypass while the signal is still running through the tubes and transformers, thus keeping the "warmth" of the tube
• Transformer balanced inputs and outputs (XLR and jack)
• Linear frequency response from 20 – 50,000 Hz
• Boost and cut can be used simultaneously to allow phase effects
• Low frequency boost - 20, 30, 60, 100, 200, 400, 800 Hz - 12 dB
• Low frequency cut - 20, 30, 60, 100, 200, 400, 800 Hz - 18 dB
• High frequency boost - 3, 4, 5, 8, 10, 12, 16 kHz - 18 dB
• High frequency cut - 3, 4, 5, 10, 20 kHz - 14 dB
• 5 more additional frequency points than the EQP-1 A for greater versatility
• Integrated 115 / 230 V IEC power supply
• Dimensions: 19" / 2U

• CineMag USA output transformer
• Pad: adjustable from -3 dB to -30 dB
• XLR output: 600 ohms
• Microphone level
• Input impedance: 1 mega ohm
• Phase reverse
• Ground lift
• Operation on +48 V phantom power
• Passive operation is also possible
• Robust aluminium housing construction
• Dimensions: 190 x 70 x 190 mm
• Weight: 0.5kg@Note: No load box - depending on the amplifier, proper speaker load is required.

• Switchable signal path with CineMag USA input and output transformer
• THAT 2180 VCAs
• External side chain input switchable
• Switchable hi-pass filter: 30, 60, 105, 125, 185 Hz
• Frequency response: 18 to 22,000 Hz
• Dynamic range:> 120 dB
• Input impedance: 10k ohms
• Output impedance: 50 ohms
• Input and output: XLR and TRS jack
• Built-in power supply
• Dimensions: 19"/ 1U

• Discrete Class A circuit
• Carnhill transformer
• 80 dB gain
• Incremented potentiometer
• Tone button for switching the input impedance
• Switch for phase reversal
• Low-cut filter 4-step switchable (50, 80, 160, 300 Hz)
• LED meter
• 48V Phantom power
• XLR microphone input
• Line input: 6.3 mm jack
• Instrument input: 6.3 mm jack
• Insert input and output: 6.3 mm jack
• Line output: XLR and 6.3 mm jack
• Integrated power supply unit (115/230 V)
• Build: 19" / 1 U

• 100% discrete signal path
• CineMag input transformer
• CineMag output transformer
• 4 Premium TungSol and Electro-Harmonix tubes: 2x 12AX7, 1x 12BH7, 1x 6AQ5 (or the 6P1 - can be interchanged)
• Kenetek opto attenuator
• Integrated power adapter
• Stereo-link capability
• Balanced XLR and jack inputs - 600 ohm impedance
• Balanced XLR and jack outputs - 600 ohm impedance
• Frequency response: +/- 1 dB, 15 - 20,000 Hz
• Gain: 40 dB +/-1 dB
• Input level: +16 dB maximum
• Output level: +10 dB nominal, +16 dB maximum
• Distortion: less than 0.1% THD at +/-10 dBm
• Attack time: 10 milliseconds
• Release time: 0.06 seconds for 50% release, 0.5 up to 5 seconds for complete release
• Meter for gain reduction and output
• Dimensions 483 x 178 x 89 mm
• Weight: 5.44 kg

• With variable attenuation and three directional characteristics
• With Warm Audio "Lens Capacitor" LK-12-B-60V
• Capsule in vintage CK12 style
• Transformer: Custom CineMag USA
• Frequency range: 20 - 20000 Hz
• Variable attenuation: 0 db, -10 dB, -20 dB
• Directional characteristics: cardioid, figure eight and omni
• Impedance: 150 ohms
• Connection: 3-pin XLR
• Requires +48 V phantom power
• Colour: Black (painted)
• Including spider and holder

• Switchable polar pattern: Cardioid, omnidirectional and figure-eight
• Dynamic range: 125 dB A
• Peak SPL: 132 dB (
• Frequency range: 20 - 20,000 Hz
• Output impedance: 200 Ohm
• Signal / noise ratio: 80 dB (A)
• Inherent noise: 12 dB A (IEC651)
• CineMag USA output transformer
• External IEC-grounded power supply
• Includes: Microphone, power adapter, spider, cable (microphone to power adapter)
• Dimensions (Ø x H): 247 x 46 mm

• 71 dB gain
• Cinemag USA input and output transformers
• Socketed Discrete OpAmp: X731 (Vintage)
• TONE switch - switching the input impedance from 600 to 150 ohms
• Microphone input: XLR
• Rear Hi-Z input: 6.3 mm jack
• Balanced outputs: XLR and 6.3 mm jack
• 48 V phantom power
• -20 dB pad
• Phase reversal switch
• LED meter: output level control for adjustable saturation effects
• Built-in 115/230 volt IEC power supply
• Format: 9.5"/ 1 U

Bundle offer comprising

• Large-Diaphragm Condenser Microphone
• Discrete construction
• Transformerless FET version of the renowned '47 classic
• Gold-coated double large diaphragm
• Switchable polar pattern: cardioid, ball, eight
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 138 dB (A)
• Max. SPL: 147/157 dB SPL (@ 1 kHz 1k Ohm 0.5% THD 0 / -10 dB)
• Noise: 9 dB (A)
• Output impedance: max. 100 ohms
• Output: 16 dBu @ 1 kHz 1k ohms
• 0.5% THD
• LoCut: 70 Hz
• Pad: -10 dB
• Requires 48 V phantom power
• Including elastic suspension, microphone holder and storage bag
• Dimensions (Ø x length): 52 x 210 mm
• Weight: 0.5 kg

• Pop Filter
• For screwing onto microphone shockmount
• With aluminum grid
• Height adjustable
• Clamp for vertical or horizontal mounting
• Clamping range up to 14 mm
• Dimensions of the filter (W x H): 88 x 93 mm
• Rod length: 17 cm
• Weight: 80 g

• Directional characteristic: Cardioid, Omnidirectional, Figure-8
• WA-87-B-50V capsule - Reproduction of the classic K87 capsule
• Gold-sputtered 6 µm NOS Mylar diaphragm
• 100% with discrete circuitry with an NOS Fairchild transistor
• WIMA/Nichicon capacitors
• Cinemag USA output transformer
• Lo Cut: 80 Hz
• PAD: -10 dB
• Max. SPL (sound pressure level): 125 dB SPL (@ 1 kHz 1 kOhms, 0.5% THD (total harmonic distortion), without a pad)
• 132 dB SPL with a pad
• Signal-to-noise ratio: -117 dB
• Frequency response: 20 Hz to 20,000 Hz
• Output impedance: 150 Ohm
• Gold-plated 3-pin XLR connector
• Colour: Black
• Includes an elastic mount suspension, a microphone holder, and a wooden storage box

Note: Requires 48 V of phantom power!

• A transformerless FET version of the renowned '47 classic
• Gold-plated double large-diaphragm
• A switchable polar pattern: cardioid, omnidirectional and bidirectional
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 138 dB (A)
• Max. sound pressure level: 147 / 157 dB SPL (@ 1kHz 1k Ohm 0.5% THD, 0 / -10 dB)
• Inherent noise: 9 dB (A)
• Output impedance: 100 Ohm
• Max. output: 16 dBu @ 1 kHz, 1 k Ohm, 0.5% THD
• LoCut: 70 Hz
• Pad: -10 db
• Requires a 48 V phantom power
• Dimensions (diameter x length): 52 x 210 mm
• Weight: 0.5 kg
• Incl. elastic suspension, microphone mount, storage bag

• Polar pattern: cardioid, omnidirectional
• Lundahl output transformer
• Tube type: NOS 6AU6
• Optimised housing for heat dissipation
• Inherent noise: 15 dB(A)
• Max. sound pressure level: 131 dB (cardioid), 134 dB (omnidirectional)
• Frequency range: 20 - 20,000 Hz
• Sensitivity: -33 dB/Pa (cardioid), -36 dB/Pa (omni)
• Output impedance: 100 Ohm
• S/N ratio: 76 dB (cardioid), 73 dB (omni)
• A separate power supply unit
• Transport case dimensions (D x L): 58 x 190 mm
• Weight: 0.6 kg
• Colour: Matt Black
• Incl. elastic suspension, Gotham 7-pole connection cable and power supply unit

• Fuzz
• Exact replica of the Foxx Tone machine, one of the most sough-after and popular fuzz pedals of all time
• Like the original, the Foxy Tone Box is covered with thick velvet
• Handmade using high quality components, including NOS 2N3565 germanium fairchild transistors as used in the original circuit
• Uses carbon resistors, 1N34A germanium diodes and film capacitors
• Controls: Volume, sustain, fuzz tone
• Switch: Octave up
• LED: Power
• Foot pedal: Effect bypass
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Power supply connection: AC adapter, 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 1.5 mA
• Powered via 9 V battery or 9 V DC power supply
• True bypass
• Dimensions (W x D x H): 165 x 95 x 38 mm
• Weight: 635 g
• Includes power supply