Dynamic Microphones

• Dynamic
• Polar pattern: Supercardioid
• Integrated pop filter
• Robust microphone grille from spring steel
• Integrated shock mount
• Gold XLR connector
• Frequency range: 40 - 19,000 Hz
• Output impedance: 300 Ohm
• Sensitivity: 2.0 mV / Pa (-54 dB)
• Dimensions: 54 x 184 mm
• Weight: 305 g
• Incl. microphone clamp, integrated windscreen (black), carrying pouch and threaded adapter

Bundle offer comprising

• Dynamic microphone

Specially developed to always give the vocals enough room under loud stage conditions and position it cleanly out of the mix.

• Polar pattern: Cardioid
• Frequency range: 40 – 18,000 Hz
• Sensitivity: 2.8 mV/Pa at 1 kHz = -51 dB (0 dB = 1V/Pa)
• Impedance 350 Ohm
• Metal housing
• Shock-mounted capsule
• Highly consistent directivity
• Hum compensating coil
• Suitable for vocals and percussion
• Dimensions 47 x 181 mm
• Weight 330 g
• Incl. Clamp and bag

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

• Dynamic
• Cardioid
• Integrated pop filter
• Robust microphone mesh grille from spring steel
• Integrated shock mount
• Gold XLR connector
• Frequency range: 50-16,000 Hz
• Output impedance: 600 Ohm
• Sensitivity: 2.5 mV / Pa (-52 dB)
• Dimensions: 52 x 181 mm
• Weight: 295 g
• Incl. microphone clip, integrated windscreen (black), carrying pouch and threaded adapter

• Polar pattern: Cardioid
• Frequency range: 80 - 12,000 Hz
• Impedance: 600 Ohm
• High quality entry microphone for lead and background vocals and choirs
• High-performance design for exceptionally clear voice recording
• Dynamic element arrangement
• Robust metal construction
• Hi-ENERGY ® neodymium magnet for improved output and transient response
• Silent on-off operation thanks to MagnaLock™ switch design
• Corrosion-resistant gold-plated XLRM-type connector
• Incl. microphone holder
• Weight: 337 g

• For lead and backing vocals
• Suitable for live and recording applications
• The dynamic,hyper cardioid capsule provides a clear and clean source recording
• Excellent feedback resistance
• Incl. Softbag and microphone clip

The 55SH Series II sports the distinctive UNIDYNE® II design, which has been for more than 60 years a symbol of the stage and show business. The microphone combines the nostalgia of the 50s and 60s with modern transducer technology and Shure's typical presence boost, making it an excellent choice for vocals. Via the cardioid polar pattern, it isolates the sound source very effectively against incoming sound from the rear of the microphone, so that there is little risk of feedback from nearby speakers. The 55SH Series II can also be used under adverse acoustic conditions where omnidirectional microphones can not be used.

The low-impedance, balanced output of the 55SH Series II is suitable for connection to microphone inputs from 75 to 300 ohms. The microphone is equipped with a shock mount against impact sound, an on/off switch, and a threaded and adjustable swivel adapter. The 55SH Series II is ideal for use in PA or theatre sound reinforcement, and also for broadcasting- and television productions, studio recording, and other audio applications where a microphone is desired in a classic style.

• Wide cardioid polar pattern
• On/Off switch
• Stand connector
• Classic visual appearance - modern performance
• Optimised frequency range for speech and vocals
• Cardioid polar pattern for optimal performance in unfavorable acoustic conditions.
• Shock mount for reduced sound impact and undisturbed operation.
• Solid diecast aluminium housing and a robust construction for reliable operation even under the harshest conditions.
• Self-tensioning swivel adapter allows for a max. 45 degree forward tilt, and backwards by 80 degrees.
• Frequency range: 50 Hz - 15 kHz
• Output impedance: 150 Ohm
• Sensitivity: -58.0 dBV / Pa (1.3 mV)
• Size: About 188 mm in length
• Weight: 624 g

Behringer Bc110 - All-In-One Dynamic Vocal Microphone Set, cardioid characteristic, Frequency response: 80 Hz to 16 kHz, Sensitivity -53 dB, ± 3 dB (1V/Pa) at 1KHz, microphone with attached cable, Connector: 3.5 mm TS, 6.3 mm TS adapter, cable length: 3 m, weight: 156 g

Specially developed to always give the vocals enough room under loud stage conditions and position it cleanly out of the mix.

• Polar pattern: Cardioid
• Frequency range: 40 – 18,000 Hz
• Sensitivity: 2.8 mV/Pa at 1 kHz = -51 dB (0 dB = 1V/Pa)
• Impedance 350 Ohm
• Metal housing
• Shock-mounted capsule
• Highly consistent directivity
• Hum compensating coil
• Suitable for vocals and percussion
• Dimensions 47 x 181 mm
• Weight 330 g
• Incl. Clamp and bag

• Especially suitable for capturing vocals, speech and guitar
• Polar pattern: supercardioid
• Maximum sound pressure level (SPL): 138 dB
• Frequency response: 20-12.000 Hz
• Neodymium
• Includes a switch and a hard rubber holder
• Incl. 5 m XLR female to jack cable

• Polar pattern: hypercardioid
• For high SPL (over 140 dB)
• Stable housing
• Extremely resistant to feedback
• For extremely loud stage/monitor applications

• Polar pattern: Supercardioid
• Frequency range: 30 - 15,000 Hz
• Max. SPL: 140 dB
• 3.3 mV / Pascal
• Impedance: 350 Ohm
• Shock-mounted capsule minimizes handling noise
• Extremely high feedback resistance
• Especially suitable for loud stages
• Black zinc diecast housing
• ABS polycarbonate
• Dimensions: 170 x x 50.5 x 24.3 mm
• Weight: 323 g
• Incl. microphone holder and bag

• Polar pattern: Supercardioid
• Frequency range: 35 - 16.000 Hz
• Sensitivity: 1.8 mV/Pa
• Rugged die-cast housing
• Dimensions: 194 x 53 x 53 mm
• Weight: 0.33 kg
• Incl. OCH1 Mic Clip and MZP3 bag

• Directional characteristic: Supercardioid
• Frequency range: 70 - 20000 Hz
• Maximum sound pressure (SPL): 156 dB
• Impedance: 600 Ohm
• Sensitivity: 2.6 mV/Pa
• Laminate Varimotion membrane
• Elastic suspension of the capsule for minimal handling noise
• Black housing
• Weight: 340 g
• Includes bag and clamp

Bundle offer comprising

• Dynamic microphone

Specially developed to always give the vocals enough room under loud stage conditions and position it cleanly out of the mix.

• Polar pattern: Cardioid
• Frequency range: 40 – 18,000 Hz
• Sensitivity: 2.8 mV/Pa at 1 kHz = -51 dB (0 dB = 1V/Pa)
• Impedance 350 Ohm
• Metal housing
• Shock-mounted capsule
• Highly consistent directivity
• Hum compensating coil
• Suitable for vocals and percussion
• Dimensions 47 x 181 mm
• Weight 330 g
• Incl. Clamp and bag

• Case
• For Sennheiser E 835, E 845, E 935, E 945, MD 435, MD 445
• 2 Inner compartments: 1 x microphone and 1 x microphone clamp
• Dimensions: 211 x 186 x 71 mm

• Polar pattern: Supercardioid
• Frequency range: 40 - 20,000 Hz
• Max. sound pressure level: 163 dB
• Impedance: 245 Ohm
• Free field sensitivity: -55.9 dBV/Pa (1.6 mV)
• Spring-mounted capsule to shield it from body-borne noise
• Dimensions (length x diameter): 174 x 47.5 mm
• Weight: 329 g

Set includes:

Shure SM58-LCE

• Dynamic vocal microphone
• Polar pattern: Cardioid
• Frequency response: 50 Hz -15 kHz
• Maximum SPL: 94 dB
• Sensitivity: -54.5 dBV/Pa (1.85 mV)

K&M microphone stand (Shure special edition)

• Tube combination height adjustable from 900 to 1600 mm
• Weight: 2.35 kg

Sommer Cable microphone cable

• Length: 6 m

Bundle offer comprising

• Dynamic Vocal Microphone with Switch

With its frequency response optimised for vocals and the warm, clear sound, the SM58 is the legend among vocal microphones worldwide.

The Shure SM58 is a dynamic microphone for lead and back-up vocals during live performances, professional audio amplification and studio recordings. An integrated, extremely effective filter prevents breathing and wind noise, while the cardioid directivity isolates the signal source and reduces unwanted background noise.

The robust design, the tried and tested shock absorber system, and the steel mesh grille ensure that the SM58 always works reliably even in the rough and tumble of everyday stage life. Whether in the open or in a hall, for singing or speaking - the SM58 has been the undisputed number one among professionals all over the world for decades.

• S version with switch
• Optimised frequency response with brightened mids and bass cuts
• Integrated, effective wind and pop filter
• Shock absorber system
• Robust construction, sturdy steel mesh grille
• Directivity: Cardioid
• Frequency range: 50 - 15,000 Hz
• Output impedance: 300 Ohm
• Sensitivity: -56 dBV / Pa (1.85 mV)
• Dimensions: 23 x 162 x 51 mm
• Weight: 298 g
• Includes clamp, 3/8" reducing thread and bag
• Matching wind shield: Article no. 135783, replacement mesh grille: Article no. 183069 (both not included)

• Microphone Stand Set
• Consists of microphone stand and microphone cable
• 10 m Microphone cable with 3-pin XLR connectors
• High quality flexible cable
• Microphone stand with boom
• Plastic tripod base
• Maximum usable height of the stand including boom: 190 cm
• Adjustable height of centre column 75 - 130 cm
• Length of boom: 65 cm
• Diameter of stand: 64 cm
• Transport length of tripod: 74 cm
• Thread 3/8" with 5/8" adapter
• Weight of stand: 1.46 kg
• Includes clamp for cable routing

• Myles Kennedy (Alter Bridge) Signature Edition
• Polar pattern: supercardioid
• An integrated pop filter
• Robust microphone cap made of rugged spring steel
• An integrated elastic mount
• An integrated black windscreen
• Gold-plated XLR connector
• Frequency response: 40 - 19,000 Hz
• Output impedance: 300 Ohm
• Open circuit sensitivity: 2.0 mV/Pa (-54 dB)
• Dimensions: 54 x 184 mm
• Weight: 305 g
• Incl. microphone clamp, microphone bag and thread adapter