Expander Modules

Der Mann mit der Maschine P2B8 Controller; Eurorack module; expands Droid Master (item 542913) with 2 freely assignable control knobs and 8 illuminated push buttons (white); example of applications: controlling LFO frequency or envelope parameters, changing pitch of a sequence or signle steps, managing presets, manual triggers, selecting quantizer scales and many more; power consumption: 12mA (+12V) / 0mA (-12V); width: 5 HP; depth: 25mm; connects to Droid Master via 6-pin ribbon cable (included)

Der Mann mit der Maschine Droid G8 Expander; Eurorack module; adds 8 jacks to Droid Master (item 542913) which each can be configured as output or input for trigger and gate signals; power consumption: 41mA (+12V) / 0mA (-12V); width: 4 HP; depth: 23mm: connects to Droid Master via 8-pin ribbon cable (included)

• Vintage edition with black front plate
• Expansion module for A-155 (Article Nr 154958)
• Different operating modes
• LED display
• 8 or 16 sequencer steps
• Controls up to 2x A-155 (2x A-155 are required for 16 sequencer steps)
• Eurorack format
• Width: 22 HP
• Depth: 80 mm
• Power consumption: +60 mA (+12V)/ -20 mA (-12V)

XAOC Devices Gera; Eurorack module; Binary Product Commander; expander module for Leibniz subsystem; applies AND logic function on every bit of the Leibniz data stream; 8 illuminated buttons and 8 Gate inputs; power consumption: 45mA (+12V) / 0mA (-12V); width: 6 HP; depth: 30mm

• Polyphony Commander for XAOC's Odessa Oscillator (available under Article Nr 474296 (not included))
• Freely control up to 5 voices via individual CV inputs (1V/oct.)
• Power is supplied via the main module
• Width: 3 HP

• Expander for 4ms Rotating Clock Divider (art. 545215)
• Switch for gate/trigger mode, extended division up to /64, spread mode, auto reset, counting direction ascending or descending
• Passive design (does not require power supply)
• Width: 4U
• Depth: 29 mm

• Extension for the Hexmix by Befaco
• Extends each Hexmix channel with 3 AUX sends (selectable pre/post fader)
• Direct output (6.3 mm jack)
• PFL function
• 3 Stereo effects returns
• Stereo headphone output (6.3 mm TRS) with volume control
• LED level indicator for master- or PFL signal
• Stereo master output (2x 6.3 mm jack)
• Power requirement: 90 mA (+12 V) / 85 mA (-12 V)
• Width: 28 HP
• Depth: 27 mm

• Expander for A-126-2 frequency shifter
• Two dome filter outputs
• Two ring modulator outputs
• Separate outputs for down-shift and up-shift signal
• Envelope follower signal output
• Width: 2 HP

Robaux MIDI Expander 2HP; MIDI-Out Expander for Robaux LL8 II Eurorack module (item 554697); 3.5mm TRS jack (compatible with MIDI type A & B); width: 2 HP

• Expander for 4ms Quad Clock Distributor (art. 545213)
• Additional functions per channel: Clock output with 3 selectable modes (delayed trigger, inverted gate, shuffle), adjustable gate length / delay time with CV input and bi-polar attenuator, bi-polar attenuator for the div/mult CV input of the Quad Clock Distributor.
• Power consumption: 44mA (+12V) / 30mA (-12V)
• Width: 12 U
• Depth: 25 mm

• Extension for ES-4, ES-40 or ES-5 module
• 8 On / off outputs for use as gate, trigger or clock
• 8x Output 3.5 mm mini jack DC-coupled
• Output voltages: 0V / 5V
• Power requirement: 20 mA at + 12Vl, 0 mA at -12V
• Dimensions (W x D): 4 HP / HP x 24 mm

• Extension for ES-4, ES-40 or ES-5 module
• 8 MIDI / DINsync outputs
• 8 MIDI channels
• DINsync wired in pairs - 4 outputs
• Status LED display per output
• Power requirement: 23 mA at +12 V, 0 mA at -12 V (12 mA total)
• Dimensions (W x D): 10 HP / HP x 24 mm

Der Mann mit der Maschine P2B8 Controller Red; Eurorack module; expands Droid Master (item 542913) with 2 freely assignable control knobs and 8 illuminated push buttons (red); example of applications: controlling LFO frequency or envelope parameters, changing pitch of a sequence or signle steps, managing presets, manual triggers, selecting quantizer scales and many more; power consumption: 12mA (+12V) / 0mA (-12V); width: 5 HP; depth: 25mm; connects to Droid Master via 6-pin ribbon cable (included)

• Extension module for FH-2 (Article Nr. 443431 - not included)
• Expands the FH-2 module by 8 programmable clock / trigger / gate outputs
• Up to 4 FHX-8GT can be connected to one FH-2
• Current consumption: 16 mA (+12 V) / 0 mA (-12 V)
• Width: 4 TE
• Depth: 41 mm

• For the MIDI 1U module by Intellijel (available under Article Nr 505285 (not included))
• 8 CV outputs to which any MIDI signals can be assigned (ex. pitch, velocity, mod, gate, trigger, clock)
• Up to 4 CVx 1U modules can be connected to the MIDI 1U
• For up to 32 CV channels
• Programmable via the Intellijel Config app
• Power requirement: 55 mA (+12 V) / 6 mA (-12 V)
• Width: 14 HP
• Depth: 32 mm

• Extension module for the Zadar by XAOC (available under Article Nr 447263 (not included))
• Manual trigger buttons and an additional assignable CV input for channels A-D
• Width: 3 HP

• 1x MIDI input and output for compatible modules with breakout header, such as Disting mk4, General CV and FH-2
• Dimensions: 4 HP / HP x 27 mm

• CV extension for ES-4, ES-40 or ES-5 module
• 8 CV outputs 3.5 mm mini jack DC coupled
• Output voltages: ± 5.33V hardware calibrated or ± 9.5 V uncalibrated (jumper setting)
• 12 bit D / A conversion
• Power requirement: 41 mA at +12 V, 33 mA at -12 V
• Dimensions (W x D): 4 HP / HP x 49 mm

• 8-Bit processor for CV and audio signals
• Member of the Leibniz subsystem (can be paired with the Drezno module and the Lipsk expander)
• 15 Banks with 256 wavetables and signal processing functions
• Scope of application (ex.): wavetable oscillator, LFO, digital waveshaper, through-zero linear phase modulation, walsh function generator, eight-voice drum pattern generator
• CV inputs for phase modulation, bank- and shape selection
• 8-Bit/Gate outputs
• Power requirement: 95 mA (+12 V) / 30 mA (-12 V)
• Width: 8 HP