DI Boxes

• Re-amping interface for multiple sources
• Stereo / Dual Direct Box
• Pad circuitry for mic / instrument inputs
• 2x XLR (balanced) / 1/4 "TRS line inputs
• Transformer-balanced XLR output (microphone level)
• Transformer-balanced 6.3 mm jack output (instrument)
• Frequency response: 20 Hz - 20 kHz
• Mute function
• Style: Desktop

• Especially for bass and keyboard
• Mono summation for stereo sources via in and through socket
• Jack input
• Jack output
• XLR output
• Switchable 15 dB pad
• Switchable ground lift
• Robust metal housing
• Colour: Green

• IR Loader and DI box
• 12 Speakers (IR-based speaker simulation)
• 4 Free memory slots for user or 3rd party IRs
• 10 Microphone and 4 power amp simulations
• Load user or 3rd party IRs via software (PC, Mac)
• Micro USB port for connecting PC and Mac
• Pressure switch: INST / LINE for the input sensitivity
• GND LIFT
• Favourite A: Footswitch for storing and calling Preset A
• Favourite B: Footswitch for storing and calling preset B
• True bypass
• Controller (all controller positions are storable): MIC: Microphone selector switch
• Center and Distance controls to adjust the position of the microphone
• CAB: Box selection switch
• Power Amp: Power amplifier selector switch
• Presence and Master controls
• Input jack
• Thru: The input signal is looped through without any changes from the input
• Headphone output
• Unbalanced output
• Balanced output (XLR)

Technical Data:

• Sampling rate: At least 44.1 kHz
• Sampling Accuracy: 24-bit Signal to Noise Ratio: 100 dB
• IR format: WAV
• Sampling Length: 1024 Samples (23.22 ms)
• Power supply: 9 V DC 300 mA (negative pole inside, not included)
• Dimensions (D x W x H): 12 x 9.5 x 5.55 cm
• Weight: 405 g

Note: Battery operation not possible. The Cabloader can be used in the effects loop of an amplifier, but not as a loadbox

• Jack input
• Jack thru connection
• XLR output
• Switchable -15dB pad
• Merge function to combine 2 line signals to 1x XLR out
• Switchable speaker simulation for 12 guitar speaker
• Ground lift switch
• Phase switch (polarity)

• Dual Stereo RIAA phone preamplifier
• Professional preamp with balanced XLR outputs
• For two stereo record players

• With Rupert Neve Custom Transmitter
• Input headroom of +21.5 dBU
• Power supply via 48 V phantom power
• Ground lift switch per channel
• 2x Input 6.3 mm jack
• 1x 3.5 mm mini jack
• 2x Thru 6.3 mm jack
• 2x XLR output

Palmer vils; passive 1-channel line isolator; aluminum and steel housing; for connecting a laptop or consumer audio device to a professional microphone input; mixes two input channels (e.g. laptop headphone output) to mono; galvanic isolation by transformer ensures interference-free sound; optimal matching of level and impedance; balanced output allows longer cable runs without interference; transformer isolated; ground lift switch; connections: Input: 2x unbalanced RCA, output: 1x balanced XLR; transformer ratio: 1:1; no power supply necessary; dimensions (WxHxD): 50 x 140 x 68 mm; weight: 0.39 kg; included in delivery: 1x Palmer vils, 1x label (tour label), 1x rubber feet; engineered in Germany

• 1 Channel
• Operable with battery or phantom power
• Pad switch (0 dB / -30 dB)
• Input jack link
• Symmetric XLR output
• 5 year manufacturer's warranty

• Floor pedal with buffer, booster and DI function
• Switching for active and passive pickups
• PURE channel for clear sound
• JFET circuit for subtle harmonic additions
• Z-tone control with variable impedance enables a wide tonal range
• 10 dB boost control
• Signal split via link output
• Bypass and boost switch
• Input: 6.35 mm jack unbalanced
• Link output: 1/4" jack unbalanced
• Output: 6.35 mm jack unbalanced, XLR balanced
• Power supply: 9V battery
• 48V phantom power via XLR connection (6.5 mA)
• Dimensions: 108 x 120 x 58 mm
• Weight: 600 g
• Includes extensive software package AmpliTube 4 and AmpliTube 5 SE as download from the manufacturer / app store
• Matching 9 V power supply PSU 9175: Art.475239 (not included)

• With a speaker emulation developed by Juergen Rath 4x 12"
• Jack input
• Direct link out
• XLR out
• Galvanic isolation
• -20/ 40dB PAD (up to 3000 W)
• Operatable via battery (9V) or phantom power (15 - 52 V)
• Gnd lift
• Battery off switch
• Rugged floor box with isolating feet

The ULTRA-DI DI20 is a one-of-a-kind DI (Direct Injection) box that can convert up to two separate, unbalanced ¼ " TRS lines into two balanced XLR outputs. It also offers a 2-channel / link mode for flexible use as a mono-, 2-channel box or splitter. In link mode, channel 1 can be output simultaneously via the two balanced XLR outputs as well as via an unbalanced jack (6.3 mm). The 3-position input attenuator can accommodate input levels of up to +48 dBu and a "Ground Lift" switch eliminates ground loops. The power supply can either be done with a battery (9 V) or with phantom power (48 V).

• Jack input
• XLR Out
• -20 / 40dB PAD (up to 3000 W)
• Operable via battery (9V) or phantom (15-52V)
• With the ground switch ground loop can be eliminated
• Battery-off switchable
• Additional Split mode (channel 1 assigns signal to both XLR outputs)
• In link mode Channel 2 outputs the signal from channel 1 balanced
• Robust housing

• Jack In and Thru
• XLR out
• Switchable low cut, -15 dB pad and phase reverse
• Ground lift
• Requires 48 V phantom power

• Mono summation over switchable merge in every channel
• Switchable pad -10 dB, -20 dB, -30 dB
• Switchable gnd lift per channel
• XLR and link out per channel
• Frequency range: 10 - 40,000 Hz
• Ratio (Ratio): 10: 1
• Format: 19"/ 1 HE

• Balanced re-amper
• XLR in / out
• Jack in / out
• 2x jack loop in / out
• Send and return separately adjustable
• Wet / Dry adjustable
• 180 ° Phase Invert switchable
• Including external power supply 15 V DV 40 0 ​​mA

• High-quality separation transformer, without battery
• Supports 50k Ohm input signals to 600 Ohm balanced outputs
• Switchable input attenuation (0, -20, -40 dB)
• Phase reverse switch
• Ground-lift switch (inputs are completely separated from ground and outputs)
• XLR outputs balanced
• Compact, black anodised aluminium housing
• Frequency response: 10 Hz - 50 kHz, ± 0.5 dB @ 4 dBu, THD: 0.01% typical @ 1 kHz, 18 dBu / <.05 hz dbu>
• Crosstalk attenuation:> 80 dB (typical)
• Inputs: 1/4 "TRS unsymm (2), 50 k ohms
• Parallel feedthroughs: 1/4 "TRS (2)
• Outputs: XLR male (2), 600 Ohm
• Low pass filter: switchable, -3 dB @ 30 kHz
• Dimensions (WxDxH): 99 x 117 x 47 mm
• Weight: 0.40 kg

• DATI (dual audio transformer / isolater)
• Frequency range: 10 - 50,000 Hz
• Total harmonic distortion (THD): 0.01%
• 2 Channels
• Inputs: XLR balanced, jack balanced, RCA
• Outputs: XLR balanced, jack balanced, RCA

• Compact and robust aluminium case with stainless steel belt clip
• Neutrik inputs and outputs
• Active balancing (phantom power required)
• LED indicator when phantom power is on
• Switchable input impedance 12 kOhm / 120 kOhm
• Input from -40 dB to +12 dB

• With stereo input/summed mono output
• Midas transformer
• Inputs: 3.5 mm Mini Jack Stereo and RCA (L/R)
• Separate level controls for both channels
• Ground lift
• Neutrik XLR output (mono summed)
• Input impedance: 7 kΩ
• Output impedance: 170 Ohm
• Sturdy, compact aluminium housing with protective corners made of hard rubber
• Dimensions (W x H x D): 118 x 64 x 112 mm
• Weight: 0.47 kg

• To convert two unbalanced channels into two symmetrical channels and vice versa
• Noise and low-distortion circuit
• XLR connectors for balanced inputs and outputs
• RCA connectors and stereo mini jacks for unbalanced inputs and outputs
• Level control for balanced and unbalanced outputs
• Illuminated on/off switch
• Robust aluminium housing
• Incl. power supply

• Transformer balanced XLR outputs
• Input impedance: 68 kOhm
• Output impedance: 600 Ohm
• Ratio: 10: 1
• Max. output: +6 dB
• Ground/Lift switch
• Format: 19"/1U
• 5 Year warranty