Large Diaphragm Microphones

• Pressure gradient transducer
• Directional characteristic: omnidirectional, cardioid, figure-8
• Switchable 10 dB attenuation
• Universally applicable: Vocal, speaker, overhead or wind instruments
• Nominal impedance 200 Ohm
• Frequency range 20 Hz...20 kHz
• Peak SPL for K
• 48 V ± 4 V Phantom power required
• Diameter 56 mm
• Length 200 mm
• Weight 500 g
• Including shock mount EA87 and wooden case
• Colour: Nickel

Bundle offer comprising

• Large Diaphragm Tube Condenser Microphone
• Hand-Selected Russian 6072A tubes
• 9 Directional characteristics between omnidirectional, cardioid and figure-8 (switchable on power adaptor)
• Frequency range: 25 - 20,000 Hz +/- 3 dB
• Peak SPL: 136 dB
• High-pass switch: 80 Hz 6 dB
• -10 dB Switch
• Dimensions: 237 x 46 mm
• Weight: 800 g
• Shock mount, power adaptor, 7-pin connector cable, wooden box for microphone and transport case included

• Pop Filter
• For screwing onto microphone shockmount
• With aluminum grid
• Height adjustable
• Clamp for vertical or horizontal mounting
• Clamping range up to 14 mm
• Dimensions of the filter (W x H): 88 x 93 mm
• Rod length: 17 cm
• Weight: 80 g

• Gold-coated 33 mm diaphragm
• Frequency range: 30 - 18,000 Hz
• Polar pattern: Cardioid
• PAD: -10 dB / -20 dB
• Sensitivity: 24.5 mV/Pa
• Impedance: 150 Ohm
• SPL: 140 dB
• Noise floor: 18 dB (A-weighted)
• Power supply: 48 V phantom power
• Dimensions (L x D): 100 x 55 mm
• Weight: 300 g
• Includes microphone holder

• With condenser capsule
• On-Air indicator
• Internal pop filter
• Incl. microphone holder BM1 and case
• Includes a 10 year manufacturer warranty

Bundle offer comprising

• Large diaphragm studio microphone
• USB port for direct operation on the computer
• No additional drivers needed
• Phantom power via USB Port
• Characteristics: Wide Cardioid
• Frequency range: 20 - 18.000 Hz
• External Low Cut and -10 dB Pad Switch
• Compatible with Vista, XP, WIN 7 and 8, Windows 10, Mac OSX, Logic and Garageband (Mac OSX)
• Compatible with Apple iPad 1/2/3 (requires optional Camera Connection Kit, not included)
• Including case, shock mount and USB cable

• Portable Desktop Absorber for Microphones
• Reduces the transmission of unwanted room influences such as reflections, ambient noise and echoes via the microphone
• Height adjustable for ideal positioning on the table
• Stable base-plate with rubber feet to decouple the tripod from the table top
• Tripod height adjustable from 230 to 330 mm
• Dimensions of the screen (L x D x H): 310 x 100 x 230 mm
• Weight: 3 kg

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• With hand-selected 1" capsule
• Ideal for vocals, drums and acoustic instruments
• Directional characteristic: Cardioid
• Requires 48 V phantom power
• Frequency range: 20 - 20000 Hz
• Max. sound pressure level: 125 dB
• Colour: Vintage grey
• Includes elastic holder and transport case

• Switchable directional characteristics: omnidirectional, cardioid, supercardioid, figure eight, 255 intermediate levels via app
• Freely configurable directional characteristics via PolarDesigner plug-in for Win & Mac
• Real-time access to directional characteristics via optional OCR8
• Bluetooth dongle (Art.467336 - not included) and PolarPilot app for Android & iOS
• Handmade CKR12 ceramic capsule based on the CK12 capsule
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 13 mV / Pa
• Output impedance: 2x 275 Ohm (balanced)
• Input impedance: 1 kOhm
• Max. sound pressure level: 148 dB / 158 dB (with pad)
• Inherent-noise: 9 dB SPL (A)
• Signal-to-noise ratio:> 84 dB
• Low cut filter: 40, 80 & 160 Hz
• Pad: -10 dB & -20 dB
• Dimensions (OC818 microphone): 157 x 63 x 35 mm
• Weight (OC818 microphone): 360g
• Includes 2 elastic brackets, 2 mini XLR adapters, 2 microphone clips, 2 windscreens, transport case and adjustable stereo rail
• HAndmade in Vienna

Note: requires 48 V phantom power.

• Sontronics STC-20
• Elastic suspension
• Pop screen
• 5m XLR cable
• Includes a bag for the microphone

Technical data STC-20:

• Large diaphragm microphone
• Cardioid
• 1" Membrane
• Ideal for vocals and acoustic instruments
• High transparency
• Open, silky sound
• Frequency range: 20 Hz - 20 kHz
• Max. SPL 120 dB
• Impedance 200 Ohm
• Dimensions (HxWxD): 194 x 53 x 53 mm
• Weight: 696 g

• Set consisting of STC-2, spider, pop shield, XLR cable (3 m) and storage bag
• Polar pattern: cardioid
• 1" Capsule
• Frequency response: 20 - 20,000 Hz
• Low-cut filter
• Adjustment: -10 dB
• Sensitivity: 12 mV / P a -38 dB ± 2 dB
• max. SPL: 120 dB
• Impedance: = 200 Ohm
• Requires a 48 V phantom power
• Connection: 3-pole XLR
• Dimensions of the microphone (H x W x D): 194 x 53 x 53mm
• Weight: 1100 g
• Colour: Black

• With dual diaphragm
• Switchable directional characteristics: Omni, cardioid and eight
• Frequency range: 20 - 20,000 Hz
• SPL: Peak 131 dB SPL
• 2 X 24 k gold-plated Mylar membrane
• 15 dB attenuation element for very high sound pressure
• Three-stage switchable low cut filter
• Integrated pop protection
• Including spider and storage bag with zipper

Bundle offer comprising

• Large diaphragm condenser studio microphone
• 1” capsule with cardioid characteristic
• Transformerless circuit
• +48 V phantom power required
• Frequency range: 20-20000 Hz
• Sensitivity: -34 dB (0dB=1V/Pa)
• Output impedance:
• Max SPL 132 dB
• Inherent noise: 12dB(A)
• Incl. wind shield, shock mount and zipper bag

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• Microphone cable
• XLR 3-pin male - XLR 3-pin female
• Length: 6 m
• Diameter: 6 mm
• Wire cross-section: 2 x 0.22 mm²
• Colour: Black

Bundle offer comprising

• USB Voice Microphone
• With a dynamic large-diaphragm capsule
• A/D-D/A Conversion is done in the microphone
• Adjustable headphone amplifier with 3.5 mm jack socket integrated
• Directional characteristics: Cardioid
• Maximum sound pressure: 115dB
• Frequency range: 40 Hz to 14 kHz
• Including: Mount for microphone stand, USB cable 3 m
• Optional accessories: Spider connector and swivel arm for table mounting (not included)

• Table microphone arm with cable guide
• Cables up to 8 mm in diameter can be attached to the underside of the arms with a clip system
• Aluminium construction
• Locking centre joint
• 3/8" Rhreaded connection with 5/8" adapter
• Table clamp up to 56 mm or table feed-through up to 45 mm (20 mm hole)
• Length upper arm: 43 cm
• Length lower arm: 43 cm
• Colour: Black

Bundle offer comprising

• Dynamic Speaker and Recording Microphone
• Polar pattern: Cardioid
• Frequency range: 50 - 20,000 Hz
• Sensitivity -59.0 dB (1.12 mV)
• Bass roll-off switch
• Mid-boost switch
• Impedance: 150 ohms
• Shielding against electromagnetic interference
• Swivel mount
• XLR connector
• Dimensions: 190 x 64 x 96 mm
• Weight: 766 g
• Includes switch cover plate and windscreen
• Suitable foam windscreen: Art.263050
• Suitable replacement pop-up windscreen: Art.157230

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

• Professional microphone cable
• Length: 0,5 m
• Black Yongsheng XLR plug (made by Neutrik)
• Incl. hook and loop fastener

Bundle offer comprising

• Dynamic Speaker and Recording Microphone
• Polar pattern: Cardioid
• Frequency range: 50 - 20,000 Hz
• Sensitivity -59.0 dB (1.12 mV)
• Bass roll-off switch
• Mid-boost switch
• Impedance: 150 ohms
• Shielding against electromagnetic interference
• Swivel mount
• XLR connector
• Dimensions: 190 x 64 x 96 mm
• Weight: 766 g
• Includes switch cover plate and windscreen
• Suitable foam windscreen: Art.263050
• Suitable replacement pop-up windscreen: Art.157230

• Table microphone arm with cable guide
• Cables up to 8 mm in diameter can be attached to the underside of the arms with a clip system
• Aluminium construction
• Locking centre joint
• 3/8" Rhreaded connection with 5/8" adapter
• Table clamp up to 56 mm or table feed-through up to 45 mm (20 mm hole)
• Length upper arm: 43 cm
• Length lower arm: 43 cm
• Colour: Black

• Microphone Cable
• Length: 3 m
• For stage and studio applications
• 2x 0.22 mm² (AWG 24)
• Hicon HI-X3CM - HI-X3CF connector
• PVC sheath with 6.4 mm diameter
• Colour: Black

• Tube / FET combination level amplifier
• Diaphragm: 34 mm
• Frequency range: 20 - 20,000 Hz
• Polar pattern: omnidirectional, cardioid and bidirectional
• Sensitivity: 27 mv/Pa
• Impedance: 200 Ohm
• Max. sound pressure level: 149 dB
• Equivalent noise: 6dB (A)
• Tube type: 5654W / EF95
• Power requirements: via an included power supply adapter (115 V or 230 V AC)
• Dimensions (L x D): 205 x 51 mm
• Weight: 640 g
• Incl. wooden case, microphone cable (8-pin), power supply unit, elastic and fixed holder as well as lockable transport case

• Specially designed for broadcasting, webcasting and recording
• Smooth and wide frequency response
• Clear and fine recordings
• Cardioid pick-up pattern can suppress sound feedback and isolate ambient sound
• 200 Hz low-cut and mid-high frequency boost switch
• Frequency range: 50 - 16,000 Hz
• Sensitivity: -58 dB (0 dB = 1 V / Pa at 1 kHz)
• Impedance: 200 Ohm (at 1 kHz)
• 5/8" Threaded mount with 3/8" thread reducer
• Connection: 3-pin XLR
• Dimensions (L x Ø): 187 x 60 mm
• Weight: 730 g
• Colour: Black

Bundle offer comprising

• Studio large diaphragm microphone
• Polar pattern: Cardioid
• Frequency range: 20 - 18.000 Hz
• Sensitivity: 18 mV/Pa -36 +/-2 dB (0 dB=1V/Pa 1000 Hz)
• Equivalent sound pressure level: 18 dB (A weighted)
• Max. SPL for 0.5 % THD @1000 Hz: 126 dB
• External low cut and -10db pad switch
• Balanced transformer
• Requires 48V phantom power
• Connection: 3-pin XLR
• Dimensions (max. diameter x length): 50.5 x 190 mm
• Incl. Shock mount and PVC case

• Pop Filter
• For screwing onto microphone shockmount
• With aluminum grid
• Height adjustable
• Clamp for vertical or horizontal mounting
• Clamping range up to 14 mm
• Dimensions of the filter (W x H): 88 x 93 mm
• Rod length: 17 cm
• Weight: 80 g

• 1" True condenser capsule
• 4 Analogue tube characteristics (Clear, Warm, Dark, Saturated)
• Crystal clear FET circuitry
• Frequency range: 20 - 20000 Hz
• Sensitivity: 17.2 mV/Pa, -35.3 dBV/Pa
• Limiting sound pressure level: 137 dBSPL at 0.5% THD
• Inherent noise: 10 dB (A) FET, 13 dB (A) tube
• Dynamic range: 127 dB (A)
• Attenuation: -6 dB, -12 dB, -24 dB
• Internal resistance: 83.8 Ohm
• Detachable remote control for flexible workflow from the sweet spot
• Infinitely variable polar patterns (omnidirectional, wide cardioid, cardioid, supercardioid, figure-of-eight)
• Low-cut filter & attenuation
• E88CC/6DJ8 tube from JJ Electronics
• PSU and remote control connection: Gold-plated 3-pin Neutrik XLR
• Microphone connection: 10-pin Hirose cable
• Microphone housing: Zinc die-cast
• Microphone dimensions (W x H x D): 65 x 196 x 45 mm
• Microphone weight: 652 g
• PSU dimensions (W x D x H): 170 x 240 x 47 mm
• PSU weight: 2381 g
• Remote Dimensions (W x H x D): 163 x 240 x 52 mm
• Remote weight: 1952 g
• 10-year Lewitt warranty
• Incl. microphone spider, double-layer magnetic pop filter, microphone clip, carrying case and 10-pin cable with Hirose connector

• With hand-selected 1" capsule
• Ideal for vocals, high-level instruments such as kick drums or bass amplifiers, electric guitars, piano, drum overheads, room mics and acoustic instruments
• Directional characteristics: omnidirectional, cardioid and figure eight
• -15dB pad
• Hi-pass filter 100Hz with 6dB / octave
• Requires 48 V phantom power
• Frequency range: 20 - 20000 Hz
• Max. sound pressure level: 125 dB
• Colour: Vintage grey
• Incldues shock mount and transport case