Large Diaphragm Microphones

• 1.07-Inch capsule with edge contacting (cardioid characteristic)
• Development with the participation of well-known producers/technicians (including Abbey Road Studios)
• Specializing in language and singing
• European 12AX7/ECC83 tube
• Switchable 10 dB attenuation
• Switchable 75 Hz high-pass filter
• LED shows optimal operating temperature of the tube for best sound reproduction
• Frequency range: 20 Hz to 20 kHz
• Sensitivity: 28mV/Pa -35 dB ± 1.5 dB (0dB = 1V/Pa @ 1,000Hz)
• Impedance: 200 Ω
• Equivalent sound pressure level: 18 DB (A-weighted)
• Peak SPL: 125 dB (at 0.5% distortion factor @ 1,000Hz)
• Including: Microphone Sontronics Aria, microphone spider, wooden box, SPS-2 power supply, power cable, connecting cable, ring holder, aluminum case

• 2x U87 large diaphragm microphone
• 2x EA87 Ni microphone shock mount
• 1x Aluminium case (suitable for 2 microphones and 2 shock mounts)

The U87 is probably the best-known and most widely used Neumann studio microphone.

It is equipped with a large double diaphragm capsule with the directional characteristics omnidirectional, cardioid and figure-of-eight, which are selected via a switch on the capsule head. A switch on the back causes a 10 dB pre-attenuation. This allows the microphone to transmit sound pressure levels up to 127 dB without distortion. Furthermore, the frequency response in the low pitch ranges can be lowered, in order, for example, to compensate for the proximity effect.

• Directional characteristic: Omnidirectional, cardioid, figure-of-eight
• Frequency range: 20 - 20000 Hz
• Nominal impedance: 200 Ohm
• Weight: 500 g
• Diameter: 56 mm
• Length: 200 mm
• Colour: Nickel

• Polar pattern: Cardioid
• Frequency range: 20 - 20,000 Hz (+/- 3dB)
• Max.sound pressure level: 127 dB
• -10/0 dB pad switch
• Low-cut filter 80 Hz
• Requires 48 V phantom power
• Integrated pop filter
• Stand thread in the housing
• Integrated shock absorption of the microphone capsule
• Dimensions (L x W): 124.5 x 54 mm
• Weight: 0.439 kg
• Suitable optional shock mount: Art.431415 (not included)

Bundle offer comprising

• Dynamic Broadcast Microphone
• Suitable for Broadcasts, Podcasts, Studio etc.
• Cardioid polar pattern reduces feedback
• Built-in pop filter and shockmount for reducing vibration noise
• Shielded against electromagnetic noise
• Frequency range: 20 to 20000 Hz
• Sensitivity: -57 DB +/- 3 DB
• Output impedance: 320 ohms
• XLR 3-pin connection
• 5/8" Thread
• Dimensions without bracket: diameter 50 mm X length 140 mm
• Dimensions with bracket (L x B x H): 200 x 90 x 50 mm
• Weight: 450 g
• Colour: Black

• Table Microphone Boom Arm
• With 5/8" threaded connector for recording studio and multimedia work stations
• For table tops up to 44 mm of thickness
• Spring-loaded articulated arm
• Total length of boom arm: Approx. 103 cm
• Length of links: Approx. 52 cm (lower arm), approx. 51 cm (upper arm)
• Black powder coated
• Includes microphone clamp
• Load bearing capacity: 1 kg

• Switchable polar pattern cardioid/omni/eight
• Frequency range: 20 - 18,000 Hz
• Hi-Pass Filter (80Hz)
• "Warm" sound
• Very low self-noise
• Maximum sound pressure: 155 dB SPL
• Transformer
• Including spider, dust cover and case

15-Year manufacturer's warranty if you register the product at audio-technica.com within 30 days of purchase

The TLM 193 is a large diaphragm microphone for professional recording and live applications. It is the perfect microphone for professional production studios, for musicians and demanding home recording.

The TLM 193 is addressed from the front, marked with the red Neumann logo.

The large diaphragm capsule inside the headgrille has a very smooth frequency response, not only for the sound coming from the front, but also for sound, which laterally falls within an angular range of more than +/- 100 °.

• Polar pattern: Cardioid
• Pressure gradient with dual-diaphragm capsule
• Transformerless circuit
• Extremely low noise: 10 dB (A)
• Quality professional equipment for medium budget
• With swivel mount in a wooden case

• Directivity: Cardioid
• Frequency response: 35 Hz - 20 kHz (± 3.5 dB)
• Peak SPL 136 dB
• 10 dB Switch
• High-Pass switch 80 Hz 6 dB / octave
• Requires 48 V phantom power
• Dimensions: 46 x 155 mm
• Includes aluminium case with wooden box and shock mount

• Acoustic mode of operation: Pressure gradient transducer
• Variable polar pattern: omnidirectional, figure-of-eight, cardioid
• Frequency response: 40 - 16,000 Hz
• Nominal impedance: 200 Ohm
• Nominal load impedance: 1000 Ohm
• Field tranmission factor: 6.5/8/10 mV/Pa ± 1 dB -43.5/-42/-40 dBV
• Replacement noise level, A-weighted: 73/74/75 dB
• Replacement noise level, A-weighted: 21/20/19 dB-A
• Sound pressure level for k
• Microphone dimensions (length x diameter): 163 x 80 mm
• Weight microphone: 800 g
• Dimensions NM V polar pattern control unit (W x H x D): 100 x 120 x 220 mm
• Weight NM V polar pattern control unit: 2.2 kg
• Incl. NM V polar pattern control unit, KC5 cable and MZ 49A oscillating mount

• 1-Inch dual large-diaphragm true condenser transducer pressure gradient with external polarization
• Full metal casing
• Switchable characteristics: cardioid, omni, figure eight plus six other polar patterns (selectable via the remote control unit)
• Frequency response: 20 - 20'000 Hz
• Switchable low cut at 80Hz
• Switchable -20dB pad
• Maximum SPL: 135/155 dB
• Diameter: 53 mm
• Length: 212 mm
• Weight: 870 grams
• Colour: Black
• Incl. spider and transport case

• Polar pattern: Supercardioid
• 1" Nickel-plated diaphragm
• Frequency response: 20 - 18.000 Hz
• Sensitivity: -32 dBV (25mV) @ 1 Pa
• Limiting sound pressure level: 136 dB (with pad)
• Inherent noise: 9.5 dB (A)
• Impedance: 150 Ohm
• High-pass filter 100Hz (6 dB/oct)
• Requires 48 V phantom power
• Weight: 0.9 kg
• Incl. shock mount

• Frequency response: 20 Hz - 20 kHz
• Directional characteristic: Omnidirectional, Cardioid & Figure Eight
• Nominal impedance: 200 Ohm
• Max. SPL (sound pressure level): 152 dB
• Dimensions: 56 x 228 mm
• Weight: 584 g
• Incl. microphone suspension, microphone holder, windscreen and transport case

• Directional characteristic: cardioid
• Frequency range: 30 Hz - 20 kHz
• Max. SPL (sound pressure level): 130 dB
• Requires 48 V phantom power
• Dimensions: 60 x 130 mm
• Weight: 544
• Incl. shock mount and microphone clamp with 5/8" thread and carrying case (3/8" adapter available under Article Nr 383050 (not included, must be ordered separately))

• Frequency response: 20 to 24,000 Hz
• Polar pattern: Omnidirectional, cardioid & figure-8
• Nominal impedance: 200 ohms
• Max. sound pressure level: 138 dB
• Tube: 6072A-M
• Dimensions: 45 x 240 mm
• Weight: 750 g
• Includes shock mount, wooden box and carrying case

• Characteristics: omnidirectional, cardioid, figure-8
• Switchable 10 dB attenuation
• Universally applicable: Vocal, speaker, overhead, wind
• Including shock mount EA87 and wooden case
• Colour: Black

Bundle offer comprising

• Studio microphone stereo set
• 2 Matched 1" large-diaphragm microphones with gold-coated double diaphragm capsule based on the AKG classic
• Polar pattern: cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity: 20 mV / Pa
• Preattenuation pad: 20 dB
• Phantom power: 12 - 52V
• Connection: 3-pin XLR connector
• Dimensions (L x Ø): 160 x 55 mm
• Weight: 280 g
• Includeslastic shockmount, metal case, 2x windshield and stand adapter

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

Bundle offer comprising

• Large diaphragm condenser microphone
• Cardioid
• 25.4 mm capsule gold-plated
• Dynamic range: 134 dB-A
• Max SPL 0.5% THD: 140 dB
• Robust zinc die-cast housing
• Gold coater 3-pin. XLR connector
• Dimensions: 138 x 52 x 36 mm
• Weight: 310 g
• Incl. DTP40 Lb leather case, LCT 40 SH microphone spider, LCT 40 PSx magnetic pop filter, LCT40 Ws windscreen

• Microphone stand with boom arm
• Length: ca. 92 to 150 cm
• Boom arm length : 70 cm
• Thread: 3/8" and with a 5/8" adapter
• Weight: 2.2 kg
• Colour: Black

• Pressure gradient transducer
• Directional characteristic: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Peak SPL: 144 dB
• Nominal impedance: 50 Ohm
• Rated load impedance: 1 kOhm
• Equivalent noise level, A-weighted: 12 dBA
• Required +48 V Phantom power
• Diameter: 52 mm
• Length: 116 mm
• Weight: approx. 260 g
• Colour: Nickel
• Including shock mount EA-4
• Suitable case: Art.494135 (not included)

• Directional characteristic: Cardioid, Omnidirectional, Figure-8
• WA-87-B-50V capsule - Reproduction of the classic K87 capsule
• Gold-sputtered 6 µm NOS Mylar diaphragm
• 100% with discrete circuitry with an NOS Fairchild transistor
• WIMA/Nichicon capacitors
• Cinemag USA output transformer
• Lo Cut: 80 Hz
• PAD: -10 dB
• Max. SPL (sound pressure level): 125 dB SPL (@ 1 kHz 1 kOhms, 0.5% THD (total harmonic distortion), without a pad)
• 132 dB SPL with a pad
• Signal-to-noise ratio: -117 dB
• Frequency response: 20 Hz to 20,000 Hz
• Output impedance: 150 Ohm
• Gold-plated 3-pin XLR connector
• Colour: Black
• Includes an elastic mount suspension, a microphone holder, and a wooden storage box

Note: Requires 48 V of phantom power!

• Large diaphragm microphone based on U87 capsule
• Cardioid
• Due to the low self-noise ideal for: radio speakers, very quiet instruments, radio play, noise recording / sampling, home recording
• As support microphone suitable for e.g.: wind instruments, strings, percussion, guitar amplifier, drum overhead
• Colour: Black
• Incl. 1x EA1 elastic holder, together in high-quality cardboard packaging - but without a wooden case and without a rigid holder
• Suitable optional case: Art.494135 (not included)

Bundle offer comprising

• Large diaphragm studio microphone
• With a 1.07" double diaphragm, switchable polar pattern (omnidirectional, cardioid, eight) and high-pass filter, the SC1100 is suitable for all studio situations.
• Switchable polar pattern: Omni-directional, figure-eight and cardioid
• Low cut switch
• Frequency response: 20 - 20.000 Hz
• Sound pressure limit: 123 dB
• Sensitivity: 39.4 mV/Pa
• Output impedance: 200 Ohm
• Distortion:
• Equivalent noise level [dB(A)]: 8.2 (ball)/ 6.8 (super-cardioid)/ 6.7 (eight)
• Power supply via phantom power 48 V (±4 V)
• Weight 941 g
• Includes aluminum case and new shock-mount

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm