Neumann

Neumann MCM WS 110; Foam Windscreen for MCM System; fits the KK14 capsule; to minimize wind noise and protect the capsule

• For Studio Monitors Neumann KH 120
• Horizontal and vertical tilt
• With locking screws
• Colour: Black

• Suitable for TLM 170 and TLM 149
• Colour: Black

• With hypercardioid directional characteristic
• No phantom power required
• Pop-screen protection and elastic suspension are already integrated
• Frequency range: 20 Hz - 20 kHz
• Sensitivity: 1.7 mV / Pa = -55.4 dB ± 1 dB
• Impedance: 200 Ohm
• Equivalent noise level: 18 dB-A

• L-shaped adapter for wall mounting
• Colour: Black (RAL 9005)

• Polar pattern: cardioid
• Pressure gradient transducer
• Successor of KM 84
• Very smooth frequency responses not only for the 0° axis, but also for lateral (off-axis) sound incidence.
• Frequency response: 20-20000 Hz
• Nominal Impedance: 50 Ohm
• Rated load impedance: 1000 ohms
• Max. output voltage 2540 mV
• Weight: 80 g
• Diameter: 22 mm
• Length: 107 mm
• Includes windscreen and SG 21 stand mount swivel

• Ideal for DECCA Tree recordings and surround microphone
• Pressure receiver capsule with 12 mm titanium diaphragm
• Unique directivity: In the range of low frequencies it offers a perfect omnidirectional polar pattern; in the middle and high frequency ranges, a narrower sound incidence angle is due to the special construction method
• 119 dB dynamic range
• Extremely low inherent noise level of 15 dB-A
• Frequency range: 20 - 20,000 Hz
• Weight: 800 g
• Included: EA 170 elastic suspension, N 149 A power supply, KT 8 connection cable, power cable and aluminium case

• Effective protection against popping sound, e.g. plosives, such as "p" or "t"
• Consists of a round, thin frame which is covered on both sides with black gauze
• Frame diameter: approx. 200 mm
• Clamp with a knurled screw
• Incl. approx. 30 cm long gooseneck

• For vertical positioning of a loudspeaker suspended from the ceiling
• Colour: Black (RAL 9005)

• Optimised for female voices in rock and pop area
• Cardioid
• Frequency range: 20 - 20.000 Hz
• Impedance: 50 Ohm
• Maximum SPL: 150 dB (0.5%)
• Requires 48V phantom power
• Nickel-plated
• XLR connector
• Dimensions 48 x 180 mm
• Weight: 300 g
• Colour: Nickel
• Delivery incl. neoprene bag and microphone holder

• 24-Bit 48 kHz signal processing
• Equipped with: 4" woofer 1" tweeter
• Frequency response (+/- 3 dB): 57 Hz - 21 kHz
• Maximum output level: 108.8 dB SPL
• Power: 90 W woofer and 50 W tweeter
• Control panel for standby and acoustical control
• Electronic peak /thermo limiter protection circuit separately for woofer and tweeter
• Input / output level control
• Linear phase DSP crossover 8th order
• External 4-position acoustical controls for low-mid or internal automatic or manual room correction (Precision Alignment) with max. 8 IIR filters plus low / high shelf global filter balance
• 70-ms delay function for time and lipsync settings
• Self-generated noise
• Input: balanced XLR, magnetically shielded
• Network connection
• 2 x M6 threaded inserts for stands/mounts
• Dimensions (H x W x D): 233 x 154 x 194 mm
• Weight: 3.5 kg

• For close miking of instruments in low noise situations or rooms with good room acoustics.
• With its flat frequency response in the diffuse sound field ideal as stereo pairs in AB technique
• Baffle plate stereophonic
• Colour nickel
• Frequency range 20-20000 Hz
• Field transfer factor with 1 kHz at 1 kΩ 12/15/10 mV/Pa
• Nominal impedance 50 Ω
• Rated load impedance 1000 Ω
• Limit sound pressure level for K
• Maximum output voltage 10 dBu
• Supply voltage 48 V ± 4 V
• Current consumption: 3.2 mA
• Acoustical operating principle
• Polar-pattern: Omni-directional
• With consecutive serial number
• Diameter: 22 mm
• Length: 107 mm
• Weight 80 g
• Incl. 2x WNS 100 windscreens and 2x SG 21 tripod joints

The reversible microphone U 87 Ai is the successor model of the U 87 i, the most well-known and most widely used microphone of the fet 80 series, which is improved in its technical values. The changes concern the increased output voltage and the reduced equivalent noise level. Both measures contribute to a remarkable improvement in recording quality. The microphone is used in the studios for orchestral recording as the main microphone, it is used as a support microphone for individual instruments use. When transmitting big-bands and when recording instrumental and vocal soloists, but also in such difficult tasks as the production of a radio play U 87 Ai is used with its many possibilities.

With three switches on the capsule head, the three directional characteristics omni, cardioid and figure-8, adjust low-frequency response and 10-dB pre-attenuation.

• Colour: Black
• Polar patterns: Omni, cardioid, figure-8
• Switchable 10 db damping
• Acoustic operation: pressure gradient receiver
• Transmission range 20-20000 Hz
• Field operating factor: 22/28/20 mV / Pa
• Nominal impedance 200 ohms
• Spare noise level DIN 45 405 dB 26/23/25
• Noise level difference to 1 Pa CCIR 68/71 / 69dB
• Boundary sound pressure level for 0.5% total harmonic distortion 117 dB (with pre-attenuation 127dB)
• Dynamic range of the microphone amplifier: 115 dB
• Current consumption: 0.8 mA
• Weight: 500 g
• Diameter: 56 mm, length: 200 mm
• Universally applicable: vocals, speakers, overheads, winds
• Note: no tripod mount or elastic suspension included (optional accessories available under Art. 189268 & 218556)

• Colour: Nickel

• With 5 polar patterns: omnidirectional, wide cardioid, cardioid, supercardioid, Figure 8 characteristic
• Bass reduction: 40 Hz or 100 Hz switchable
• Level reduction: -6 dB or -12 dB switchable
• Navigation switch with LED display for directional characteristic
• Low-cut and pre-attenuation
• Max sound pressure level: 141 dB (153 dB at -12 dB pad)
• Replacement noise level
• A-rated: 10 dB-A
• Diameter: 64 mm
• Length: 145 mm
• Weight: 445 g
• Colour: Black
• Incl. SG2 swivel joint and wooden case

• Elastic microphone mount suitable for U87
• Colour: Black

• Equipped with: 10" Woofer, 3" Midrange, 1" Tweeter
• Frequency range: 26 - 22.000 Hz (± 3 dB)
• Input: XLR balanced analog
• Magnetically shielded
• Class AB Amplifier
• Active 3i Way crossover with 24 dB / Oct
• Integrated thermo and peak limiters for each driver, bass, mid and treble controls
• Parametric EQ
• Expandable with optional digital inputs
• Dimensions (H x W x D): 645 x 330 x 444 mm
• Netto: 36 kg
• Brutto: 35 kg