|
|
Fredenstein Bento 2 Pure Analog; 2-slot rack chassis for modules of the API 500 system with analogue power supply +/- 16Volt/+48Volt; 500mA per slot; reduced cabling effort as audio routing can be switched at the rear panel; compressor link switch; intelligent voltage distribution; energy-efficient; can be extended by 2 additional slots with Bento 2 Extension (item code 566212); internal power supply; design: desktop
|
Price History: Fredenstein Bento 2 Pure Analog
266.00 $ |
|
|
500 Preamp Module
- Based on the Golden Age Project Pre-73 MK3
- Gain range: -15 to +80 dB
- Microphone input impedance switchable between 1200 and 300 Ohm
- 48V phantom power switchable
- Phase inversion switch
- 2-Stage hi-pass filter
- Switchable AIR mode
- DI input switchable passive/active
- Construction: 500 rack module
|
Price History: Golden Age Project Pre-573 MKIII
268.00 $ |
|
|
OpticalCompressor
- With "Multi Channel Link" function
- External sidechain input via the AUX input socket when using a Bento6 / 10 500 rack
- Discrete operational amplifier OPA2 (changeable)
- Reverse Mancini circuit
- Input gain knob, ratio, release
- Output level and wet / dry mix function
- Attack adjustable (12, 25 and 50 ms)
- Adjustable ratio from 1.5: 1 to 7.5: 1
- Switchable side-chain filters of 150 or 300 Hz
- 16-Digit LED display for level reduction
- Clip LED
- Cascadable with second Artistic Leveler
- Bypass switch
- Type: 500 module
|
Price History: Fredenstein Artistic Leveler
269.00 $ |
|
|
3-Slot Rack for 500 Series Module
- Up to 800 mA load per rack
- Gold-plated XLR inputs and outputs
- Built-in universal power supply 90-250 V
- Short circuit and overload protection
- Light aluminium housing
- Includes a carrying bag
|
Price History: Lindell Audio 503 Power
282.00 $ |
|
|
500 Module
- 1-Channel 500 module version of the Really Nice Compressor
- Balanced input and output
- Link function for stereo operation (with second RNC 500)
- Max. input and output levels +28 dBu
- 24-Bit arithmetic
- SuperNice & Normal modes
- Gain reduction LED meter
- Aluminium buttons
- Integrated overcurrent protection
- Housing format: 500 module
|
Price History: FMR Audio RNC 500
294.00 $ |
|
|
6-Slot Rack for Modules of API 500 Systems
- Internal power supply +/- 16 V/ +48 V
- Reduced cabling, so that the audio routing may be switched from card to card on the rear panel
- Intelligent power distribution
- Energy efficient
- Low-noise integrated power supply
- Matching 19" rack kit available under Article Nr 341739 (not included)
|
Price History: Fredenstein Bento 6S
299.00 $ |
|
|
Channel Strip
- Channel strip with SuperAnalogue microphone preamplifier and 5-fold LED display
- +48 V phantom power
- With phase and HPF switch
- Separate instrument/line input on the front panel with Hi-Z switch (1MO)
- Switchable 2-band EQ with bell and shelving characteristics per band
- Switchable "Single Knob Compressor" with threshold control and own 3-way LED display
- Preamp gain: variable from +6 to +72dB (Mic), -3 to +63dB (Line)
- Construction: API series 500 format, requires a 500 slot
|
Price History: SSL 500-Series SiX Channel
309.00 $ |
|
|
Dual dand deesser 500 module
- Removal of sibilant noise via phase cancellation
- 2-band processing: Hi-S and Lo-S
- Controls for Hi-S and Lo-S
- De-S intensity LED display
- Male / Female voice selection
- On / Bypass toggle switch
- Signal LED
- Single slot 500 series rack module
|
314.00 $ |
|
|
6-Slot Rack for API 500 System Modules
- Internal power supply +/-16 V / +48 V
- Reduced cabling, as the audio routing can be switched from card to card on the rear panel
- Intelligent voltage distribution
- Energy efficient
- Extremely low-noise integrated power supply
- Colour: Black
- Suitable 19" rack kit: Article Nr. 341739 (not included)
|
Price History: Fredenstein Bento 6SB
314.00 $ |
|
|
500 FET Style Compressor and Limiter
- Parallel compression with crossfade control
- High pass sidechain filter
- 3 Step Switched Attack Times
- 3 Step Switched Release Times
- 3 Step Switched High Pass Sidechain Filter: Off, 100 Hz, 300 Hz, 3 Step Switched Ratio 4:1, 12:1, 100:1 (all in)
- True Hardware Bypass
- Balanced transformer output
- -LED gain reduction meter
- Construction: API Series 500 Format
|
Price History: Lindell Audio 7X-500
322.00 $ |
|
|
Transient Designer - 500 module
- Extended original Transient Designer circuitry
- Attack, sustain, output level and mix controls (blend between 'wet' and 'dry')
- Differential Envelope Technology (DET)
- On / Bypass toggle switch
- Signal LED
- 500 series rack module (single slot)
|
333.00 $ |
|
|
Empty Housing for up to Four 500 Series Modules
- On Slot technology (power regulation for each individual slot)
- Link function (each channel can be linked to the next channel at the touch of a button)
- Power supply with 400 mA per rack
- Phantom power supply (140 mA max. total demand)
- External power supply unit
- XLR connections
- Sheet steel housing with aluminium front panel
- Design: 500 module series, 3U
- Weight: 1 kg
|
Price History: Heritage Audio OST-4 V2
333.00 $ |
|
|
Active Re-Amping Box
- Splitter for guitar amp
- Converts a +4 dB signal to a hi-impedance signal for guitar amplifiers or effects pedals
- 1x XLR in
- 2x Jack out
- Phase reverse
- Output gain
- Suitable for Radial X-Amp and further system 500 frames
- Attenuation 10 dB to 60 dB
|
Price History: Radial Engineering X-AMP 500
333.00 $ |
|
|
500 Series Module Pre-Amp and EQ
- Discrete design based on Lindell Hybrid amplifiers
- Coupled transformers with balanced inputs and outputs
- Up to 65 dB gain
- Passive "Pultec-style" EQ
- Coil + hybrid gain make up amplifier
- 3-Step switchable EQ Low Freq Boost: 30 Hz, 60 Hz, 100 Hz (+/-10%)
- 3-Step switchable EQ High Freq Boost: 6 kHz, 10 kHz, 16 kHz (+/-10%)
- Selectable high boost bandwidth
- Phase changeover switch
- 48 V Phantom Power
- 5 LED VU Meters
- Design: API Series 500 Format
|
Price History: Lindell Audio 6X-500
333.00 $ |
|
|
Headphone monitoring amp with the Phonitor Matrix 500 module
- Two separately adjustable headphone outputs, each with their own separate amplifier stages
- Phase reversal of L and R channels, as well as stereo / mono / mute switching
- Electronically balanced
- Impedance: 10 kOhm
- Max. input level: +21 dBu
- Max. output level: +18 dBu @ 600 ohm, +15 dBu @ 300 ohm, +5 dBu @ 32 ohm
- Frequency range: 10 - 10,000 Hz
- Noise floor: -92.3 dBu (A-weighted)
- Total harmonic distortion (THD): 0.00024% (at an output level of 0 dBu and 600 ohm)
- 0 dBu = 0.775 V
- Dual slot 500 series rack module
- Weight: 0.8 kg
|
333.00 $ |
|
|
500 Series Module EQ
- Coupled transformer with symmetric inputs and outputs
- Passive EQ in Pultec style
- Hybrid gain make-up amplifier
- 3-Step switched EQ low frequency boost 30 Hz, 60 Hz, 100 Hz +/-10%
- 3-Step switched EQ high frequency boost 6 kHz, 10 kHz, 16 kHz +/-10%
- 3-Step switched EQ high frequency attenuation 10 kHz, 15 kHz, 20 kHz +/-10%
- True hardwire EQ bypass
- Design: API Series 500 format
|
Price History: Lindell Audio PEX-500
357.00 $ |
|
|
Microphone Preamplifier and Signal Processor in 500 Series Module Format
- Linear, transparent microphone preamplifier
- 2 Discrete analogue saturation circuits for sound colouring
- THD+N: 0.0002 %.
- Frequency and phase linearity: Frequency response ±0.7 dB from 5 Hz to 200 kHz at max. gain and
- Front-End topology with 68.5 dB gain across all 12 gain steps
- 3-Way input selector switch (Mic, line and instrument)
- Line recordings with +26.5 dBu input headroom
- DI input in BJT design and 1.5 MOhm input impedance
- Needs a 500 slot
- Form factor: 500 Series module
|
Price History: Cranborne Audio Camden 500
359.00 $ |
|
|
500 Series Module
- Parametric equaliser in classic Pultec style
- Vintage edition
- Discrete design based on the vintage OPA1731 operational amplifier
- 3-Step LF frequency gain: 30 Hz, 60 Hz, 100 Hz (+/-10%)
- 3-Step HF frequency attenuation: 6 kHz, 10 kHz, 16 kHz (+/-10%)
- 3-Step switched EQ high frequency attenuation 10 kHz, 15 kHz, 20 kHz (+/-10%)
- True bypass
- Design: 500 Series module
|
Price History: Lindell Audio PEX-500 Vintage Edition
366.00 $ |
|
|
500 Module
- Microphone preamplifier with passive 2-band Pultec-Style equalizer
- Vintage edition
- Up to 65 dB gain
- 3-Step LF frequency amplification: 30 Hz, 60 Hz, 100 Hz (+/- 10%)
- 3-Step RF frequency gain: 6 kHz, 10 kHz, 16 kHz (+/- 10%)
- Polarity switch
- Discreet vintage OPA1731
- +48 V Phantom power
- 5-LED VU meter
- Type: 500 Module
|
Price History: Lindell Audio 6X-500 Vintage Edition
375.00 $ |
|
|
500 Series Module
- 1-Channel Microphone/Line/Instrument Preamplifier in vintage style
- No circuits in the signal path, only discrete elements such as resistors, capacitors, and transistors
- Carnhill input and output transformers
- Max. gain: 80 dB (microphone)
- Gain range: -10 to +80 dB
- Impedance, switchable: 1200 / 300 Ohm
- High pass filter, switchable: 45 / 180 Hz
- AIR EQ: 6 dB boost at approx. 30 kHz
- Phase reversal switch
- +48 V phantom power, switchable
- DI instrument input 6.3 mm jack on the front
- Design: 500 Series module
|
Price History: Golden Age Premier Pre-573
383.00 $ |