|
|
8-Slot Rack for API 500 System Modules
- With analogue power supply +/- 16 Volt / +48 Volt
- 500 mA per slot
- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel
- Compressor link and ground lift switch
- Intelligent voltage distribution
- Energy efficient
- Design: 19" / 3U
|
Price History: Fredenstein Bento 8 Pure Analog
385.00 $ |
|
|
Single-channel vintage style compressor in 500 module format
- Discrete built-in signal path
- Transformer balanced input and output
- Class-A circuit
- Controls for attack, release, threshold, ratio and gain
- Bypass switch
- High-pass filter
- Analog VU meter, switchable between output signal and compression
- Link switch synchronizes 2x COMP-554 to a stereo pair
- Insert switches
- Design: 500 module
|
Price History: Golden Age Project Comp-554
385.00 $ |
|
|
500 module
- 60s Style FET Compressor / Limiter
- Vintage Edition
- Variable mix control
- Attack and release can be adjusted in 3 steps
- Highpass sidechain filter with 3 settings (off, 100 Hz and 300 Hz)
- Ratio selectable: mild 4: 1, heavy 12: 1 and "all-in" 100: 1
- True-bypass
- 20-LED Gain-Reduction Meter
- 2x Vintage OPA1731
- Construction: 500 module
|
Price History: Lindell Audio 7X-500 Vintage Edition
399.00 $ |
|
|
6-Slot Rack for 500 Series Module
- Up to 400 mA load per module
- Gold-plated XLR and D-Sub inputs and outputs
- Each module has a feed switch for forwarding the output signal to the adjacent module
- External universal power supply unit 100-250 V
- Short circuit and overload protection
- Light aluminium housing
- Includes a carrying bag
|
Price History: Lindell Audio 506 Power MKII
419.00 $ |
|
|
1-Channel compressor - 500 module
- Analog signal path
- Frequency response: 20 Hz - 20 kHz (+/- 0.2 dB)
- Ratio adjustable from 2:1 to 100:1
- High-pass filter adjustable from 20 Hz to 4 kHz
- Side-chain input (optional peak or RMS)
- Soft-knee or Hard knee selectable
- Link function for stereo operation with a second F600A
- Bypass function
- Power consumption: +/- 16V, +/- 200 mA
|
Price History: Fredenstein F600A Kompressor
419.00 $ |
|
|
8-Slot Rack for API 500 System Modules
- With analogue power supply +/- 16 Volt / +48 Volt
- 500 mA per slot
- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel
- Compressor link and ground lift switch
- Intelligent voltage distribution
- Energy efficient
- Integrated monitoring section with headphone amplifier as well as 2x VU meters to control the individual channels
- Design: 19" / 3U
|
Price History: Fredenstein Bento 8 Pro Pure Analog
422.00 $ |
|
|
Vintage 3-band EQ
- In the 500 series API format
- Two active Baxandall tone controls for the bass and treble band as a flat-band controller +/- 12 dB
- A half-parametric mid-band filter
- Switchable frequency range for high band 2k / off / 5k
- Switchable frequency range for bass band 80 Hz / off / 110 Hz
- Mid band filters from 155 Hz to 3500 Hz continuously adjustable, gain max +/- 10 dB
- Three-stage toggle switch for controlling the quality of the center band 1.5 / 0.7 / 0.4
- Construction: API 500 series
|
Price History: Roger Schult W2395c
431.00 $ |
|
|
Stereo Image Processor
- Range: Selects the frequency range to be processed
- Stage: Selected frequency range can be moved backwards or forwards on the stereo stage
- Bigness: Adjusts the intensity of the stereo image
- Bypass switch
- Signal LED
- Construction: API Series 500 format, requires two 500 slots
|
435.00 $ |
|
|
4-Band stereo EQ in API 500 format
- Fusion Violet with minimum-phase high- and low-shelving filter
- Two additional fully parametric mid-band EQs, each with focus mode for targeted frequency processing
- Switchable high-pass filter (off/30/40/50Hz)
- Trim control for output level
- LF Shelf EQ: +/- 9dB gain @ 30/50/70/90Hz
- HF Shelf EQ: +/- 9dB Gain @ 8/12/16/20kHz
- HMF Parametric EQ: +/- 9dB Gain @ 600Hz - 6kHz
- LMF Parametric EQ: +/- 9dB Gain @ 100Hz - 1.1kHz
- Gain Trim: +/- 12dB
- Construction: API Series 500 format, requires two 500 slots
|
Price History: SSL 500-Series UltraViolet EQ
439.00 $ |
|
|
Portable 3-slot rack for system 500 modules
- Per input channel input (XLR and jack), output (XLR and jack), omniport, feed and link
- Switchable 48 V phantom power
- External power supply
- Metal grip
|
Price History: Radial Engineering Workhorse The Cube
466.00 $ |
|
|
10-slot rack, 19" module carrier
- For Fredenstein Series 500 modules
- Internal 90- 240 V AC power supply with +/- 16 V /+48 V
- Built-in audio routing: modules can be daisy-chained via switches on the back panel
- Intelligent voltage distribution
- Energy efficient
- Extremely low noise integrated power supply
- Incl. 19" rackmount
|
Price History: Fredenstein Bento 10S
472.00 $ |
|
|
4-Band Equaliser in 500 Series Module Format
- Identical to the Trident Series 80 console
- Low frequency range between: 60 Hz and 120 Hz switchable
- High frequency range between: 8 kHz and 12 kHz switchable
- Lower centre adjustable between 100 Hz and 1.5 kHz
- Upper centre adjustable between 1 kHz and 15 kHz
- 50 Hz Hi pass switch
- Peak LED
- Bypass switch
- Design: 500 Series module
|
Price History: Trident Audio 80B-500 EQ
481.00 $ |
|
|
1-channel tube microphone pre-amplifier 500 module
- Two double triode tubes (ECC802S and ECC803S)
- American input and output transformers
- DI input 6.3 mm jack 500 kOhm
- + 48V phantom power can be switched
- High pass filter switchable 50 Hz or 100 Hz
- -20 dB Pad switchable
- Max. Input Level: +12 dBu
- Max. Output Level: + 26 dBu
- Illuminated VU display
- Clip LED
- Construction: 500 module
|
Price History: Fredenstein F609 Mic Preamp
482.00 $ |
|
|
10-Slot Rack
- 19" Rack for API 500 system modules
- Internal 90-240 V (AC) power supply with +/- 16Volt/+48Volt
- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel
- Intelligent voltage distribution
- Energy efficient
- Extremely low-noise integrated power supply unit
- Colour: Black
- Includes 19" rack kit
|
Price History: Fredenstein Bento 10SB
485.00 $ |
|
|
Microphone Preamp in 500 Format
- Microphone preamp for recording guitar
- Up to 60 dB gain at the input section
- -27 dB to +12 dB Output Trim
- Post effect grinding path
- Selectable high-pass filter: 80 Hz / 200 Hz
- Selectable high-shelf filter: 7000 Hz / 4000 Hz
- Frequency response: 20 to 2000 Hz flat (all filters deactivated)
- 100% Analog signal path
- Controller for gain and output
- -20 dB Pad toggle switch for high-level input signals
- Phase toggle switch to reverse the signal phase
- +48 V toggle switch to enable phantom power
- High-shelf toggle switch to select the high-shelf filter frequency
- High-pass toggle switch to select the high-pass filter frequency
- Status LED for +48 V phantom power
- Metal housing
- 2 Front-side 6.3 mm mono-pin (send / return) connections
- Return socket can be used as DI input (post filters, pad and phase reversal)
- For mounting in racks of the 500 series
- Made in USANote: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.
|
Price History: Meris 500 Series 440 Mic Preamp
491.00 $ |
|
|
Reverb effect in 500 format
- 2 Reverb algorithms
- Separate controls for the interaction of high and low frequencies with the Reverb algorithm
- 24 bit AD / DA with 32 bit floating point DSP
- Switchable headroom for guitar / line level input levels
- Auto Swell Envelope function
- 100% analog bypass
- Analogue wet / dry mix
- Controls for Space Decay, Modulate, Mix, Lo Frequency, Pitch Vector and Hi Frequency
- Alt (Hold) / Algorithm Select button to select between the reverb algorithms (Ultraplate / Cathedra) and activation of the alternative controller functions
- Bypass switch
- Swell switch
- Status LEDs
- Metal housing
- For mounting in racks of the 500 series
- Made in USA
|
Price History: Meris 500 Series Mercury 7 Reverb
491.00 $ |
|
|
500 Series Module
- Equaliser based on the Pultec EQP1
- Wide frequency range
- Vintage 1731 opamp design
- Hand-wound induction coil
- Symmetrical output transformers
- Hardware bypass switch
- Design: 500 Series module
|
Price History: Lindell Audio PEQ-501A
511.00 $ |
|
|
10-Slot Rack for 500 Series Module
- Up to 500 mA load per module
- Gold-plated XLR and D-Sub inputs and outputs
- Each module has a feed switch for forwarding the output signal to the adjacent module
- External universal power supply unit 100-250 V
- Short circuit and overload protection
- Light aluminium housing
- Includes 19" rack adapter and blanking plate
|
Price History: Lindell Audio 510 Power MKII
527.00 $ |
|
|
Empty Cabinet for up to six 500 Modules
- On Slot technology (power control for each individual slot)
- Link function (each channel can be linked to the next channel)
- Power supply with 400 mA per module
- Phantom power (140 mA max. total requirement)
- External power supply
- XLR connectors
- Sheet steel housing with aluminium front panel
- Construction: 500 module series, 19" / 3U
- Dimensions (H x W x D): 13.4 x 24.5 (28.4 cm with handle) x 18.5 cm
- Weight: 2.368 kg
|
Price History: Heritage Audio OST-6 V2
538.00 $ |
|
|
DerrEsser - De-esser
- Module for the API-500 system
- Dynamic multifunctional filter - mainly for use as a de-esser
- Frequency range: 3 Hz - 120 kHz (-3dB points)
- Dynamic range - 115 dB from max. output (.5%THD soft clipping) to minimum output
- Input impedance: 20 Ohms
- Output impedance less than 51 ohms
- Power consumption: 4 W - max. 800 W
|
Price History: Empirical Labs EL-DS-V Derresser Vertical
566.00 $ |