Solid-State Guitar Heads

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
• Dimensions (W x H x D): 396 x 214 x 165 mm
• Weight: 6 kg
• Colour: Black
• Incl. remote control base board

Connectors:

• Mic Input
• Line In
• Alternative Input
• Direct Out
• Monitor Out
• Master Out (Jack & XLR)
• S/PDIF digital input and output
• MIDI In / Out / Thru
• 2x Foot switches (Jack)
• Network
• USB

Bundle offer comprising

• Amplifier 19" VersionSince the introduction of modeling technology into the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.

But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Power rack version with 600 watt class D amplifier
• Power: 600 watts into 8 ohms, 300 watts into 16 ohm
• Format: 19 "/ 3 HE
• Dimensions (W x H x D): 48.3 x 13.9 x 22 cm (as the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)
• Weight: 6.18 kg
• Colour: Black

Collections:

• Mic input
• Line In
• Alternative input
• Direct Out
• Monitor Out
• Master Out (jack & XLR)
• S / PDIF digital input and output
• Midi In / Out / Thru
• 2 x Footswitch (jack)
• Network and USB

• USB Stick
• More than 130 official amp sounds for Kemper on USB stick
• Made in a professional recording studio
• To use only with a Kemper amp

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

• 2 Channels
• Power: 100 W
• Clean channel: Volume, Bass and Treble
• Dirty channel: Volume, Bass, Middle, Treble and Gain
• Master: Volume and Reverb
• Effects: Reverb
• Serial FX loop
• Speaker outputs: 1 x 16 Ohm and 1 x 16/8 Ohm
• Input: 6.3 mm jack
• FX send / return: 2x 6.3 mm jack
• Connection for footswitch: 6.3 mm jack
• CabSim: XLR
• Dimensions (W x D x H): 55 x 25 x 23 cm
• Weight: 13.8 kg
• Colour: Black

• Extremely light and small, but as powerful as a heavy amp
• New full range voicing option with tight damping for use with modelers
• Direct out with switchable cab sim for studio recordings and direct PA connections
• 1 Channel
• Output: 200 Watt
• Controls: Gain, Limiter, Bass, Mid, Treble, Reverb, Master
• Switch: Voicing
• Signal Out: Line ut pre master / headphone post master
• Speaker outputs: 8 & 4 Ohm (6.3 mm jack each)
• Serial effect loop
• Input: 6.3 mm Jack
• FX Loop Send & Return: 2x 6.3 mm Jack
• DI Out: XLR
• Universal power supply - can be used anywhere in the world without the need for transformers or switches
• Dimensions (W x D x H): 216 x 184 x 83 mm
• Weight: 1.4 kg

Bundle offer comprising

• Kemper Profiling Amplifier Power Rack + Remote Control

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
• Dimensions (W x H x D): 396 x 214 x 165 mm
• Weight: 6 kg
• Colour: Black
• Incl. remote control base board

Connectors:

• Mic Input
• Line In
• Alternative Input
• Direct Out
• Monitor Out
• Master Out (Jack & XLR)
• S/PDIF digital input and output
• MIDI In / Out / Thru
• 2x Foot switches (Jack)
• Network
• USB

• Case for Kemper Amps with a Foot Switch
• Double door case suitable for a Kemper Profiling amplifier PowerHead and the Profiler Remote Control foot switch
• Material: 7 mm Birch plywood
• With phenolic resin
• 22 x 22 mm Aluminium profile
• 4 Mini butterfly catches
• 2 Folding handles
• 1 Strap handle
• 4 Rubber feet
• Steel ball corners
• With an additional compartment for a remote control
• Foam padding covering the entire inside of the case
• Outer dimensions (W x D x H): 500 x 320 x 380 mm
• Weight: 8.7 kg
• Manufactured in Germany

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

• Ultra-compact pedal transistor amp/preamp
• Ideal as part of a portable guitar rig or as an emergency backup if the main amp fails
• 1 Channel
• Power: 15 watts
• Controls: Gain, Bass, Middle, Treble, Volume
• Switch: Bright/Norm
• Speaker output 8 - 16 Ohm: 6.3 mm jack
• Input: 6.3 mm jack
• FX Send/Line output: 6.3 mm jack
• FX Return: 6.3 mm jack plug
• Dimensions (W x D x H): 70 x 114 x 53 mm
• Weight: 0.7 kg
• Includes 24 V DC/1.0A power supply unit

• Picks up where the Overdrive 200 left off and features three new tones with their own overdrive channel, reverb, limiter and a line out with speaker simulation
• The three tones range from the improved Quilter classic "Full Q" on Voice 1, the "bell-like" overtone-rich Voice 2 to the concise and full attack of Voice 3
• The Overdrive 202 provides a suitable timbre for every musical situation
• Can be combined with a UFC-3 footswitch and BlockDock 12 HD box for the ultimate travel rig (neither included)
• International power supply accepts AC voltages from 100-250V
• 3 Channels
• Power: 200 watts
• Overdrive Channel controls: Gain, Limit, Output
• Controls Clean Channel: Gain, Bass, Mid, Treb - Reverb, Master
• Switch: Voice 1/2/3, Sig Out Pre/Post
• Speaker outputs: 4, 8 Ohm (2x 6.3 mm jack)
• FX loop: Series
• Input: 6.3 mm jack
• FX Send & Return: 2x 6.3 mm jack
• Sig Out: 6.3 mm stereo jack
• Footswitch connection: RJ45
• DI Out: XLR
• Dimensions (W x D x H): 218 x 185 x 74 mm
• Weight: 1.8 kg

Suitable accessories (not included in delivery):

• Block Case 2.0: Art.491262
• UFC-3 foot switch: Art.488400
• BlockDock 12HD: Art.442063