Tube Guitar Heads

• Smaller version of the legendary Soldano SLO 100 high gain amplifier with a smaller housing and 30-watt power amplifier
• Ultra-transparent post master FX loop with return level
• Channel switch on the front
• Wth Soldano Depth Mod
• Channels: 2
• Power: 30 watts
• Preamp tubes: 4x 12AX7
• Power tubes: 2x 6L6
• Controls: Ch 1 Gain, Ch 1 Master, Ch 2 Gain, Ch 2 Master, Bass, Middle, Treble, Depth, Presence
• Switches: Channel Switch, Bright Switch, Mode Switch (Clean / Crunch), Fx Loop On / Off
• Speaker outputs: 2x jack (4/8/16 ohm switchable)
• Transparent serial effects loop
• Made in the USA
• Includes footswitch

Bundle offer comprising

• Tube Head
• Preamp based on the classic 1959 SLP
• 1 Channel with 4 separate inputs
• Power: 20 W with power reduction to 5 W
• Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34
• DI out
• Serial FX loop
• Dimensions: 500 x 240 x 230 mm
• Weight: 9.25 kg

• Case
• Suitable for Marshall Studio Classic SC20 (Art.457019) and Marshall Studio Vintage SV20H (Art.457091)
• With 2 fixing straps and 1 shoulder strap
• Made of coated 6.5 mm birch multiplex wood
• 22 x 22 mm Aluminium edge
• Min. 10 mm foam padding
• 2 Small spring-loaded butterfly latches
• 1 Strap handle
• Small steel ball corners
• Rubber feet 25 x 11 mm
• Outer dimensions (W x D x H): 569 x 300 x 310 mm
• Weight: 5.8 kg
• Colour: Phenolic resin brown
• Made in Germany

• 2 Channels
• Power: 100 Watts
• Tube configuration: 3x JJ ECC83S, 4x New Sensor EL34EH
• Volume control per channel (Treble and Bass)
• Presence, Bass, Middle and Treble EQ controls
• Bright switch for treble channel
• High Mid Gain switch
• Switchable impedance (4/8/16 Ohm)
• Adjustable bias
• Dimensions (H x W x D): 25.4 x 54.6 x 25.4 cm
• Weight: approx. 12 kg
• Colour: Black

Since the amps are back again with the idiosyncratic coloration, they have rightfully claimed their niche in the highly competitive amplifier market. Because just like before when countless greats used these amps, Orange builds amplifiers with distinctive sound for people who know exactly what they want.

• Power: 15 Watt
• 1 Channel
• Controls: Master Volume, Treble, Mid, Bass and Gain
• Pre-amp: 3 x ECC83s
• Power amp: 2 x EL84 tubes
• Effects loop with 12AT7 tube
• Switchable 15-7 Watt
• Dimensions (W x H x D): 40.8 x 18.3 x 21.7 cm
• Weight: 8.06 kg

• New MK3 version with integrated two-notes torpedo reactive load and virtual cabinets with stereo XLR output, which deliver perfect direct sound for stage, studio and home applications
• 4 Channels
• Power: 120 watts - power levels from 120 W down to 10 W.
• Optimised Red & Purple channels
• New Clean & Crunch Voices
• Integrated noise gate & reverb
• Fully programmable
• Can be controlled either by simply changing programs or by calling up presets using the foot switch provided or with compatible MIDI devices
• Internal load - automatically active if no speaker is connected
• Cuolored illuminated acrylic logo
• Rear bias test points with easily accessible settings for each pair of power tubes as well as a tube fault indicator
• Preamp tubes: 5x 12AX7
• Power amp tubes: 4x 6L6GC
• Controls: 4x Treble, 4x Middle, 4x Bass, 4x Level, 3x Gain, Master 1, Master 2, Presence, Depth, Virtual Cab, Level
• Switches: Wide, Bright, Fat & Cut
• Effects: Reverb & Noise Gate
• Speaker outputs: 4 ohms (2x 6.3 mm jack), 8 ohms (2x 6.3 mm jack), 1x 16 ohms (6.3 mm jack)
• Effect loop-in paths: Buffered Serial Effects Loop
• Input: 6.3 mm jack
• FX Send & Return: 6.3 mm jack
• Foot switch connection: 5-pin DIN
• USB (Type B)
• MIDI In & Thru
• 2 Stereo direct outputs: XLR
• Cab Lighting: 4-pin DIN
• Dimensions (W x D x H): 673 x 254 x 267 mm
• Weight: 20.9 kg
• Includes 6-way foot switch & protective cover
• Handmade in Canada

• Power: 15 W / Can be reduced per switch down to 4 W
• 2 Switchable channels: Crunch and Full Burn
• Tube components: 2x EL84 and 5x ECC83S
• 1 Input
• Controls for Gain, Low, Mid, High, Volume and Presence
• Effects loop: Send and return
• Dimensions (H x W x D): 17.8 x 32.5 x 15.9 cm
• Weight: 7.3 kg
• Incl. single button footswitch
• Corresponding gig bag: Article Nr 375788 (not included)

• Further developed version of this legendary high-gain amplifier with lower noise level
• 2 Channels
• Power: 100 watts
• Preamp tubes: 4x 12AX7
• Power tubes: 4x 6L6
• Ultra-transparent post master FX loop with return level
• Channel switch on the front
• With Soldano Depth-Mod
• Controls: Ch.1 Gain, Ch.1 Master, Ch.2 Gain, Ch.2 Master, Bass, Middle, Treble, Depth, Presence
• Switches: Channel Switch, Bright Switch, Mode Switch (Clean/Crunch), Fx Loop On/Off
• 2 Speaker outputs: 6.3 mm jack, with 16, 8, 4 Ohm switch
• Effects loop: Ultra transparent series
• Finish: Black Tolex, Classic Metal Grille & white faceplate
• Made in USA

• All-tube amplifier
• Power: 120W
• 2 Channels (Clean/Crunch and Lead)
• 4x 6L6 Power amp tubes
• 6x 12AX7 Preamp tubes
• 3-Band EQ
• Integrated reverb
• Presence control
• Effects loop
• Switchable impedance (4,8 and 16 Ohm)
• Matching is no longer necessary
• Different types (6L6, EL34 ...) can be combined
• Operating point is always perfectly set
• Statistically more durable tubes
• Incl. footswitch (channel switching, FX loop)
• Dimensions (HxWxD): 249 mm x 687.3 mm x 246 mm

• Full-tube
• Power: 23 Watt
• 2 Independent switchable channels - each with 3 modes
• Tube equipment: 2x 6V6, 5x 12AX7
• Fixed bias
• Channels 1 and 2 each with controls for clean, drive & hi modes, gain, treble, mid, bass, presence
• Reverb & master control
• Vintage All-Tube, Long-Tank, Spring Reverb per channel
• Tube FX loop
• External reverb foot switch output
• Dimensions (H x W x D): 21.90 x 47.78 x 24.13 cm
• Weight: 8.20 kg
• Includes protective cover and 1-fold foot switch for channel switching
• Made in Petaluma, USA

• Reissue series - authentic DSL sound
• Power: Low power circuit from 1 W to 0.1 WM
• 2 Footswitchable channels with classic Gain and Ultra Gain
• Tube assembly: 1 x ECC82 and 2 x ECC83
• Tone Shift key for Mid configuration
• EQ controls for Treble, Mid and Bass
• Emulated Line Output
• Series FX loop
• Includes footswitch

• Power: 35 / 25 / 10 W, switchable
• 2 Channels
• Power tubes: 4x EL84
• Preamp tubes: 6x 12AX7
• Channel 1: Clean, Fat or Crunch mode with multiwatt power switch (10 / 25 / 35 W), Gain, Treble, Mid / Boost, Bass, Presence, Reverb (rear side), Master and footswitchable Solo control
• Channel 2: Legendary Mark IIC+, Mark IV, and Xtreme modes with multiwatt power switch (10 / 25 / 35 W), Treble, Middle, Bass, Presence, Reverb (rear side), Master, independent Gain, and footswitchable Solo control
• 5-Band graphic EQ
• Channels 1 + 2 are separately selectable and footswitchable
• Spring reverb: Channels 1 + 2, separately selectable and adjustable (rear side)
• FX loop
• Built-in CabClone speaker simulation (closed-back / open-back / vintage), with integrated load resistor and headphone output
• Speaker on / off and Ground Lift switch
• Dimensions (H x W x D): 23.5 x 48 x 28 cm
• Weight: 12.5 kg
• 4-Way footswitch and cover included
• Made in USA

• 2 Channels
• Power: 50 Watt
• Preamp tubes: 3x ECC83
• Power amp tubes: 2x EL34
• Controls: Presence, Bass, Middle, Treble, Loudness1, Loudness2
• Serial effect loop-in
• Inputs: 4x 6.3 mm jack
• Outputs for speakers (min. 4 Ohm): 2x 6.3 mm jack
• FX send & return: 2x 6.3 mm jack
• Dimensions (W x D x H): 660 x 210 x 260 mm
• Weight: 15.3 kg
• Made in GB

• Pete Thorn Signature Model
• Built-in Reactive Load and integrated Impulse Responses for silent recording or a studio-suitable DI output that can be used live
• Headphone output and AUX input for practicing and jamming to your favourite songs wherever you are
• Channels: 3
• Power: 15 Watts
• Preamp tubes: 5 x 12AX7
• Power tubes: 2 x 6V6GT
• Controls: (CH1) Gain 1, Bass, Treble, Level 1, (CH 2/3): Gain 2, Gain 3, Bass, Middle, Treble, Level 2, Level 3
• Switches: Channel Select switch, I.R. Bank Select button, I.R. Cab Select button CH1 Bright switch CH2 Bright switch, CH3 Bright switch, Impedance switch (4/8/16 ohms)
• Speaker outputs: 2 x 6.3 mm jack
• Connectors: Input (6.3 mm jack), AUX input (3.5 mm stereo jack)
• FX Send & Return (2 x 6.3 mm jack)
• Line output (6.3 mm stereo jack)
• Headphone output (3.5 mm stereo jack)
• Footswitch (6.3 mm stereo jack)
• USB
• Dimensions: (W x D x H) 521 x 210 x 235 mm
• Weight: 11.2 kg
• Includes a 2-button footswitch
• Made in the USA

• 2 Channels: Dirty and Clean
• Power: 30 W RMS - switchable to 15 W and 7 W
• Power amp tubes: 4x EL84
• Preamp tubes: 4x ECC83
• Tube for the effect loop: 1x ECC81
• Dirty channel with volume / shape / gain
• Clean Channel with Treble / Bass / Volume
• With FX Loop (Send/Return)
• Connector for optional footswitch
• Speaker connections for 1x 16 Ohm or up to 2x 8 Ohm speakers
• Dimensions (H x W x D): 27 x 55 x 24 cm
• Weight: 15.5 kg
• Colour: Black

• 1 Channel
• Power: 20 Watt
• Preamp tubes: 3x 12AX7
• Power amp tubes: 2x EL84
• Controls for Bass, Middle, Treble, Master, Gain
• Switch for Gain Structure decreases Gain
• B-Switch
• Serial Ultra Transparent FX Loop
• Output for external speakers (4, 8, or 16 Ohm)
• Dimensions (H x L x W): 216 x 457 x 210 mm
• Weight: 9.9 kg
• Made in USA

• Power: 22 W
• 2 Channels
• Preamp tubes: 3 X 12AX7
• Power amp tubes: 2 X EL 84
• 1 Clean control
• 1 Gain control
• 1 Volume adjustment
• 3-Band EQ
• 1 Master control
• 1 Presence control
• Built-in digital reverb (adjustable)
• Inputs: Normal and Bright
• Impedance switchable between 4, 8 and 16 Ohm
• Triode and pentode modes
• 2 Speaker outputs
• Input for footswitch
• FX loop
• Dimensions (W x H x D): 572 x 238 x 270 mm
• Weight: 12.7 kg
• 2-Way foot switch (FSB102A) included

• 2 Channels: Clean (Green) / Full Burn (Red)
• Power: 15 watts - 4 watts switchable
• Tube equipment: 2x EL84 and 4x ECC83S
• 1 Input
• Controls for Gain, Low, Mid, High, Dual Concentric Volume and Presence, Resonance
• Effects loop with send and return
• Dimensions (H x W x D): 17.8 x 32.5 x 15.9 cm
• Weight: 7.3 kg
• Colour: Black
• Includes single button foot switch
• Matching optional gigbag: Art.375788 (not included)

• Based on a modified JTM45, but still delivers the typically British tone for which Friedman is known
• 2 Identical channels suitable for many styles of music from blues to rock and country
• Harmonises very well with effects pedals
• 2 Channels
• Power: 40 watts
• Preamp tubes: 5x 12AX7
• Power amp tubes: 2x 5881
• Controls per channel: gain, master. Bass, Middle, Treble
• Global controls: Presence and Deep
• Switch: Bright Switch & 3-position Gain Switch per channel
• Effects loop: Ultra transparent series
• Instrument input: 6.3 mm jack
• Footswitch connection: 6.3 mm jack
• Effects loop send & return: 2x 6.3 mm jack
• Outputs for external speakers: 1x 6.3 mm jack (4, 8 or 16 ohms)
• Dimensions (W x D x H): 616 x 216 x 241 mm
• Weight: 14.5 kg
• Handmade in USA

• Mark Tremonti (Alter Bridge) Signature Model
• 2 Channels: Clean and Gain
• Power: 15 W - reducible to 7 W
• Preamp tubes: 6x JJ EC83S
• Power tubes: 2x JJ 5181
• Gain in the gain channel: Gain / Master / Treble / Middle / Bass
• Clean Channel controls: Volume / Treble (Pull Boost) / Middle / Bass
• Includes foot-switch and protective cover
• Dimensions: (W x D x H): 35.6 x 20.3 x 18.4 cm
• Weight: 8.1 kg
• Suitable case: Article Nr. 509100 (not included)

• 3 Fully independent channels, including separate EQs
• Power: 180 Watts
• For perfectly selected sounds at any output level
• Preamp tubes: 5 x 12AX7
• Power tubes: 6 x EL34
• Channel 1 controls: Volume, treble, middle, bass, gain
• Channel 2 controls: Volume, treble, middle, bass
• Channel 3 controls: Volume, treble, middle, bass
• Mid cut: Intensity level
• Master: Volume 2, presence, deep, volume 1
• Parallel loop level
• Switches: Channel switch, ch.2 +/-, loop, mute, store
• Channels & Ch.2 +/- switchable via Midi
• Input: 6.3 mm Jack
• 3 Effects loop
• Serial FX loop send & return: 2 x 6.3 mm Jack
• Parallel FX loop send & return: 2 x 6.3 mm Jack
• Switchable FX loop send & return: 2 x 6.3 mm Jack
• Footswitch boost: 6.3 mm Jack
• Speaker outputs: 16 Ohm, 8 / 2x16 Ohm and 4 / 2x8 Ohm via 6.3 mm jack
• Tuner out: 6.3 mm jack
• Compensated out: 6.3 mm jack
• Midi In & Thru: 2 x 5-pin DIN
• Footswitch: XLR female
• Dimensions (W x D x H): 740 x 280 x 270 mm
• Weight: 25 kg
• Made in Germany