Tube Guitar Combos

• 1 Channel
• Power: 40 watts
• Preamp tubes: 3x 12AX7
• Power amp tubes: 2x EL84
• Speaker configuration: 1x 12" Celestion G12M-65 Creamback 16 Ohm
• Controls for Bass, Middle, Treble, Master, Gain
• Gain structure switch reduces gain
• B-switch: bright / tight
• Serial Ultra Transparent FX loop
• Instrument input: 6.3 mm jack
• Footswitch: 6.3 mm jack
• Effect send and return: 2x 6.3 mm jack
• Output for external speakers (4, 8, or 16 Ohm): 6.3 mm jack
• Dimensions (W x D x H): 616 x 241 x 559 mm
• Weight: 20 kg
• Handmade in USA

• 1 Channel
• Power: 20 W
• 3-Position voicing switch (rhythm, tweed, lead) for authentic 50s and 60s vintage sounds
• Integrated Ironman II reactive power attenuator (up to -36 dB) with a precision tuned reactive load, Fletcher Munson volume compensation circuitry, and damping factor correction
• Equipped with 1x 12" speaker, custom designed by Eminence
• Preamp tubes: 2x 12AX7A
• Power tubes: 2x 5881
• Housing design: Open
• Controls: Volume - Tone - Reverb Dwell - Reverb Mix - Attenuation Level
• 3-Way sound switch: Rhythm, Tweed, Lead
• Integrated reverb
• Connections: Hi & Lo input (2x 6.3 mm jack) - Footswitch input (4-pin XLR)
• Dimensions (W x D x H): 572 x 483 x 279 mm
• Weight: 15.4 kg
• Colour: Turquoise
• Includes a 4-way footswitch
• Made in the USA

• Reissue Series - Authentic DSL Sound
• Power: Low-power circuit from 1 W to 0.1 W
• 2 Foot-switchable channels with classic gain and ultra gain
• Equipment: 8" Celestion Eight-15 loudspeakers
• Tube equipment: 1x ECC82 and 2x ECC83
• Tone-shift key for center configuration
• Independent volume and gain controls for both channels
• Common tone control for treble, midrange and bass
• Emulated line output
• Serial FX loop
• Dimensions (W x H x D): 360 x 340 x 215 mm
• Weight: 7.9 kg
• Includes foot-switch

• Integrated Ironman II compensated power attenuator (up to -36 dB)
• Channels: 2
• Power: 20 W
• Preamp tubes: 3x 12AX7A
• Power tubes: 2x 6V6
• Equipped with: 1x 12" Custom designed 8 ohm ceramic magnet speaker from Eminence
• Attenuator features: Precision Tuned Reactive Load, Fletcher-Munson Volume Compensation Circuitry, Damping factor correction
• 5AR4 Rectifier tube
• 12AT7 Reverb driver tube
• 12AX7A Reverb receiver tube
• Housing design: open
• Controls on the rhythm channel: Vol, Treb, Bass
• Lead channel: Vol, Tone, Mid-Bite
• Reverb
• Tremolo speed ??& depth
• Attenuation level control
• Switches: channel selector (switchable via the front-, or footswitch), power on/off, standby, rhythm channel
• Attenuator bypass & HF compensation
• Effects: spring reverb tubes
• Hi & Lo input: 2x 6.3 mm jack
• Speaker: 6.3 mm jack
• Footswitch input: 6.3 mm stereo jack
• Power supply (cold device plug)
• Dimensions (W x D x H): 572 x 489 x 267 mm
• Weight: 16.4 kg
• Colour: Tweed
• Includes a 2-way footswitch (channel, tremolo)
• Made in the USA

• 2 Channels
• Power: 40 Watt
• Preamp tubes: 3x 12AX7
• Power amp tubes: 2x EL84
• speaker configuration: 1x 12" Celestion 16 Ohm 12" G12M-65 Creamback
• Very transparent series FX loop
• Instrument input: 6.3 mm jack
• Footswitch: 6.3 mm jack
• Effect send and return: 2x 6.3 mm jack
• Output for external speakers (4, 8, or 16 Ohm): 6.3 mm jack
• Dimensions (W x D x H): 616 x 241 x 559 mm
• Weight: 20 kg
• Handmade in USA

• 1 Channel
• Power: 5 Watt
• Equipped with: 1x 10" Celestion TEN 30 speaker
• Preamp tubes: 2x 12AX7
• Power tube: 1x 6V6
• Controls for volume, treble, bass, reverb, speed, and intensity
• Effects: Reverb and vibrato
• 2 Instrument inputs: 6.3 mm jack
• Footswitch connection: 6.3 mm jack
• External speaker connection: 6.3 mm jack
• Dimensions (W x D x H): 42.9 x 20.63 x 35.56 cm
• Weight: 9.5 kg

The amps of the Dutch company Koch are no longer an insider tip. Nice tube sound, at the same time flexible and settled in a fair price class - these are the most important infos in advance. The studiotone combo could attract all guitarists who want to use the warmth and distortion of a power amplifier at tolerable volumes. On the other hand, this amp with its 20 W also has clean reserves, which should be sufficient in most cases.

Which brings us to the clean channel, which has quite Fender-like qualities: You can choose from fat to sparkling sounds here, with 2 voicing switches (2x for mid, 3x for treble), which effectively modify the sound. The overdrive channel on the other hand really takes off - strong, warm tube sound located between the rough British and settled American sound. The gain will be enough for most people. The Overdrive Boost channel, boosts the same sound even stronger and thus also hi-gain applications are covered. The 3 sounds share one equalizer - in the studio no problem anyway. But also for live applications it is no problem, because the gain staging between clean and overdrive is already set.

The 12" VG12 Koch loudspeaker installed here is built in cooperation with Jensen and it fits perfectly to this small power cube. A highlight not only in the studio, but also when you have a quite delicate situation with the volume live: A recording-out with two simulated speaker types and microphone positions is located at the back. If you have to play silently, one can switch on the power soak and send the signal directly to the mixer - completely without any noise. Excellent tube sound with many useful features - not just for the studio!

• Power: 20W
• Equipped with: 1x 12" VG12-60 Koch loudspeaker
• 3 Channels: Clean, overdrive, overdrive boost
• Class A
• Tubes: 2x EL 84
• Passive bass - mid - treble equalizers
• 2 Vocing switches: Mid shift (2-way), bright (3-way)
• Separate loudspeaker outputs: 4, 8, 16 ohm
• Speaker on/ off switch
• Recording output
• Effect loop
• Reverb
• Headphone output
• Dimensions: 45 x 24 x 44 cm
• Weight: 17.5 kg
• Incl. FS2-ST foot switch

An authentic reproduction of the original vintage amplifier with one of the most coveted clean sounds of all time.

• 2 Channels
• Power: 85 W
• Equipped with: 2x 12" Jensen C12K 8 ohm speakers
• 4 Inputs, 2 per channel
• Preamp tubes: 4x 12AX7, 2x 12AT7
• Power tubes: 4x 6L6
• Open housing design
• Controls (mono) on the normal channel: Volume - Treble - Middle - Bass
• Controls on the vibrato channel: Volume - Treble - Middle - Bass - Reverb
• Controls for vibrato: Speed - Intensity
• Bright switch for each channel
• Effects: Spring Reverb - Tremolo
• Connection port for an external speaker cabinet
• Tilt-back legs
• Dimensions: (W x D x H) 673 x 267 x 505 mm
• Weight: 29 kg
• Colour: Black
• Includes a 2-button footswitch (reverb/vibrato) and a vinyl protective cover
• Suitable case available under Article Nr 234740 (not included, must be ordered separately)

• Full tube combo with reverb, tremolo and two built-in power reducers (attenuators)
• 2 Channels
• Power: 35W
• Equipped with: 1x 12" Celestion Custom Voiced "Tone King 1660" speaker
• Preamp tubes: 4x 12AX7, 1x 12AT7
• Power tubes: 2x 6L6GC
• Rectifier tube: 5AR4
• Open housing
• Knob rhythm channel: Volume, treble and bass
• Controller lead channel: Volume, tone and mid bite
• Further controls: Reverb Level, Tremolo Rate and Depth, Attenuation level (Rhythm), Attenuation Level (Lead)
• Switch: Lead / Rhythm Chanel, Mode Ultra Linear / Pentode, Impedance 8/16 Ohm
• Effects: Reverb, tremolo
• Input: 6.3 mm Jack
• Dimensions (W x D x H): 610 x 305 x 457 mm
• Weight: 27.2 kg
• Colour: Turquoise
• Includes 2-fold footswitch
• Made in USA

• Power: 30 W @ 16 ohms
• Speaker assembly: 1 x 12" Celestion VX12
• Tube assembly: 2 x 12AX7 (ECC83) pre-amp, 4x EL84 power amp
• 1 Input - 1 channel
• Controls: Gain, bass, treble, reverb, volume
• Rear: External box output, FX send & return
• Dimensions (W x D x H): 658 x 265 x 550 mm
• Weight: 24.5 kg

• Power: 25 Watt
• Equipment: 1x 12" Celestion G12M-65 speaker
• Controls: Volume, Treble, Bass, Master
• Effects: FX loop
• Preamp tubes: 2x ECC83S
• Power amp tubes: 2x 6V6GT
• 1 Input jack
• FX-Loop send & return inputs
• Blue Rhino cover with white piping
• Dimensions: 60 x 41 x 27 cm
• Weight: 19,0 kg
• Colour: Blue Rhino Hide

• Power: 15 W
• Equipment: Supro DK-12 speaker
• Controls: Volume, treble, mid, bass, reverb, master
• Effects: Boost, Drive
• Preamp tube: 12AX7
• Power amp tube: 6L6
• Tweed cover with black piping
• 1 Instrument input
• 1 Rear line output
• 1 Rear boost/drive switch input
• 1 Rear power amp input
• Dimensions: 43 x 19 x 41 cm
• Weight: 13.0 kg
• Colour: Tweed and black

It is not without reason that the Fender amps of the tweed era (named after the amp's fabric cover) have such a great reputation as the ideal amplifiers for blues and rock 'n' roll. On the one hand, they deliver crisp cleans at a moderate volume, which is often hard to find. On the other hand, turning up the volume releases a soft, creamy distortion - lying across the fine line between clean and crunch - that is simply unrivalled.

The Reissue Blues Deluxe offers two channels, one of which is predestined for the clean department, while the other can be made to sing at a civil volume by adjusting the master volume. Practically all good sounds between Bassman and Deluxe can be produced. With the Eminence 12" speaker, the amp has enough power to fill small clubs with plenty of sound. The name says it all: The Blues Deluxe is an outstanding amp (not only, but especially) for blues and all other styles where warm, harmonically distorted sounds are desired.

• Power: 40 W
• Equipped with: 1x 12" special design Eminence 8 Ohm speaker
• 2 Channels
• Reverb
• Colour: Tweed
• Dimensions (W x H x D): 59.7 x 47.6 x 26.7 cm
• Weight: 22 kg
• Foot switch included

Let’s start with the most important thing: The sound. Besides having a great clean sound (Clean/Crunch channel in “green” mode), this amplifier is a quintessential Marshall and as such gives you everything from vintage Plexi-style sounds through to modern high-gain tones. Another sound you can get is a rather atypical but great-sounding “American” clean sound that other British amps rarely produce.

What do the colours mean? Let us explain. The Clean/Crunch channel features three variations: Green, orange, and red (which may well be familiar from other Marshall products). The orange setting takes the sound in a Plexi direction, while red produces a crunchy 1980s-style sound.

The Overdrive channel continues where the Clean/Crunch channel left off and provides gain in every dimension – with Marshall’s characteristic bite and no muddiness. A tamer, more creamy sound is also easy to dial in if you prefer, however. On top of all this, a programmable four-way footswitch is included that can be used to control all of the amplifier’s switching functions.

This 1x12“ combo delivers a compact, open, and surprisingly full sound in an easily transportable package – so it combines great sounds with outstanding flexibility at a fair price.

• Equipped with: 1x 12" Celestion G12 speaker
• Power rating: 50 Watt
• Tubes: 5 x ECC83 and 2 x EL34
• 2 Channels (without semiconductor in signal path): Clean/Crunch and overdrive
• 6 Basic sounds via relay switch
• 2 Effects loops: Programmable parallel effects loop
• Emulated line out
• 2 Master volumes
• Reverb
• All switch functions controllable via MIDI
• Dimensions: 605 x 510 x 265 mm
• Weight: 26.5 kg
• Programmable 4-way foot switch included

Tone King Imperial Mk II CR; tube combo amplifier for electric guitar; built-in Ironman II compensated power attenuator (to -36dB) attenuator design features: precision tuned reactive load, Fletcher Munson volume compensation circuitry, damping factor correction; 5AR4 rectifier tube; 12AT7 reverb driver tube; 12AX7A reverb receiver tube; channels: 2; power: 20 watts; pre-amp tubes: 3 x 12AX7A; power-amp tubes: 2 x 6V6; equipped with: 1 x 12" Custom designed made by Eminence 8 Ohms Ceramic Magnet speakers; cabinet construction: open back; controls: Rhythm Channel: Vol, Treb, Bass - Lead Channel: Vol, Tone, Mid-Bite - Reverb - Tremolo Speed & Depth - Attenuator: Attenuation Level; switches: Chanel select (selected by front panel switch or footswitch), Power On/Off, Standby, Rhythm Ch. Attenuator Bypass & HF Kompensation; effects: tube driven spring reverb; connections: Hi & Lo Input (2 x 1/4" Jack - Speaker (1/4" Jack) - Footswitch in (1/4" TRS-Jack) - power inlet (C14 IEC plug); dimensions (W x D x H): 572 x 489 x 267 mm; (22,5" x 19,25" x 10,5"); weight: 16,4 kg (36,2 lbs); included: Two button footswitch (channel; tremolo); color: cream; made in USA

Bundle offer comprising

• Electric Guitar Combo
• Hot rod series
• 1 Channel
• Power: 15W
• Speakers: 1x 12" Celestion A-Type
• Tubes: 3x 12AX7 and 2x EL84
• 1 Jack input
• Controls: Reverb, Master, Middle, Bass, Treble, FAT Switch, Volume
• Chicken Head Style Buttons
• Dimensions (H x W x D): 40.8 x 45.72 x 23.31 cm
• Weight: 14.3 kg
• Design: Black textured vinyl and slightly aged silver-coloured front grille fabric
• Suitable optional case: Art.318741 (not included)

• Original Protective Cover
• For Blues Junior
• Colour: Black

• Vintage Series 68 Silverface
• Tubes 3x 12AX7, 1x 12AT7 and 2x 6V6
• 1x 10" Celestion TEN 30 speaker
• 12 Watt
• 2 Inputs
• Controls: Volume, treble, bass, reverb, speed, intensity
• Effects reverb and vibrato
• 2-Way foot switch and cover included
• Dimensions (H x W x D): 40.6 x 50.5 x 24.13 cm
• Weight: 15.7 kg