Electric Guitar Preamps

• Next generation dual DSP based HX Modeling Engine with 4 discreet stereo-signal paths
• 50 Guitar amp models, 12 bass amp models, 37 speakers, 16 microphones and 104 effects
• Imported IRs (impulse responses) with up to 1024 / 2048 samples
• 12 Pressure sensitive foot switches for editing
• The Hands Free Pedal Edit mode sets the effects parameters onto the switch and expression pedal
• Near-Instant foot switch and controller assignment
• Up to 3 expression pedals
• CV/Expression output
• Amplifier switching output and extensive MIDI control
• Extensive inputs and outputs for the seamless integration of entire rigs
• 10 Inputs, 12 outputs (including four FX loops)
• 8 In / 8 Out USB audio interface
• AES / EBU, SPDIF and VDI interfaces
• 123 dB Dynamic range on the guitar input for enormous depth and low noise
• Robust construction
• Dimensions (W x D x H): 55.8 x 30 x 8.5 cm
• Weight: 6.6 kg

• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume control

• All tube
• Designed by Horst Langer and Engl Amplification
• The blue channel is based on channel 3, the red channel on channel 4 of the Engl Powerball
• 2 x 12AX7 tubes
• 2 Channels
• Separate 3-band EQs
• Gain and volume controls
• The three-stage cathode selector switch allows you to configure the input tube bias setting for optimal input gain and bass response

• All-tube DI solution for Live & Recording
• 1 Watt all-tube amplifier with integrated Reactive load and loudspeaker simulation
• 1 Channel
• Power: 1 W
• Tubes: 3x 12AX7, 1x 12DW7/ECC832
• Controls: Gain I, Gain II, Treble, Middle, Bass, Volume, Dynamics, Contour, Emphasis, Level
• Switches: Voicing, More/Less, Cab + Mic In/Out, Air/Bite, Power, AUX Level, Ground Lift
• Speaker outputs: 1x 6.3 mm jack
• Effect loops: Headphone FX Loop Snd (1x 6.3 mm jack), Return (2x 6.3 mm jack)
• Connections: Headphone Out (1/4" jack), Program In (3.5 mm jack), AUX Input (1x 6.3 mm jack), Amp Line Out (1x 6.3 mm jack), DI Out 1 (1 x XLR & 1x 6.3 mm jack), DI Out 2 (1 x XLR & 1x 6.3 mm jack)
• Dimensions (W x D x H): 218 x 157 x 91 mm
• Weight: 2.5 kg

• For vocals or instruments
• By way of an effects loop, enables you to incorporate guitar FX pedals into the signal path
• Adjustable Dry / Wet
• Adjustable Send and Return
• Adjustable Low / High EQ
• Mute button
• Loop Wet / Dry button
• 48 V Phantom power
• XLR In / Out
• Jack In / Out
• Incl. external power supply

Bundle offer comprising

• Kemper Profiling Amplifier Rack BK + Remote Control

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Dimensions (W x H x D): 483 x 139 x 220 mm
• Format: 19" / 3U (since the rubber feet should not be removed for ventilation reasons, a minimumm of 4U rack is required)
• Weight: 4.5 kg
• Colour: Black
• Remote control footboard included

Connections:

• Mic input
• Line in
• Alternative input
• Direct out
• Monitor out
• Master Out (Jack & XLR)
• S/P DIF digital input and output
• MIDI In/Out/Thru
• 2 x Footswitch (jack)
• Network
• USB

• USB Stick
• More than 130 official amp sounds for Kemper on USB stick
• Made in a professional recording studio
• To use only with a Kemper amp

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

• New-Gen CDCM & FIRE Modelling System
• Modelling Dual-DSP effects processor with up to 9 simultaneous effects
• 64 Amp models
• 60 Cab models
• Over 100 pedal models
• 198 Presets
• Over 50 original Hotone effects - including High Quality Drive / Dynamic / Filter / Mod / Delay and Reverb models
• Model the microphone type and microphone position
• Support for additional third-party impulse responses using HoTone Editor (IR Loader)
• 24 Bit signal processing up to 120 dB S/N ratio
• Drum machine with 100 patterns
• Integrated looper with 120 seconds of recording time
• Black Tech" acoustic guitar simulation
• Integrated expression pedal
• USB connection for editing the IRs/effects or for using the Ampero as a USB audio interface
• 4" LCD 800 x 480 colour touch screen display
• Controls: Volume, Menu/Value
• Buttons: 3
• LED: Effect on
• Foot switch: Effect bypass
• Current consumption: 500 mA
• Dimensions (W x D x H): 273 x 143 x 51 mm
• Weight: 1202 g
• Includes 9 Volt DC power adapter

Note: No battery operation possible.

Connectors:

• Input: 6.3 mm jack
• Stereo output: 2x 6.3 mm jack
• AUX in: 3.5 mm jack
• Headphone output: 3.5 mm jack
• Expression / Control connection: 6.3 mm jack
• USB Type-B
• AC adapter connection: Hollow plug socket 5.5 x 2.1 mm
• Negative pin inside

• "Soft Knee" compressor circuit
• 4-Band EQ with bass, mid, treble and high-pass filter
• 2 Reverb effects
• 2 Delay effects
• 2 Chorus effects
• Flanger and tremolo effects
• Foot switchable boost function
• Switchable phase reversal
• DI output
• Dimensions (L x W x H): 136 x 241 x 56 mm

Note: A 9 V power supply unit (e.g. article nr 409939) or a 9 V battery is required for operation (both not included).

• Paul Lander's (Rammstein) Signature Model
• 2-Channel SansAmp Fly Rig section
• Active 3-band EQ in the "Fire" channel with switchable mids
• Bite switch
• 2-Band EQ and compressor in the "water" channel
• Switchable dual mode boost
• Optionally up to +6 db or -10 db
• Integrated tuner
• Original TECH 21 DLA Delay with Tap Tempo function
• Vibrato effect with tap tempo
• Ambiance effect with two room simulations in studio quality
• Guitar input
• XLR Out incl. Ground Lift Switch
• Headphone output
• Dimensions: 32 x 6.5 x 3.2 cm
• Weight: approx. 525 g
• Includes auto-switching AC adapter for voltages of 110 - 240 V.

Bundle offer comprising

• Multi-Effect Pedal for Electric Guitar & Electric Bass
• Powerful and compact effect unit with 2 GHz dedicated DSP from the Quad-Core SHARC architecture
• Unique neural capture network architecture enables the analysis and simulation of the dynamics and sound of other amplifiers
• Integrated Wifi for sharing rig capture presets, backups and firmware updates
• The integrated Superior Modeling Technology enables a constantly growing collection of algorithms with uncompromising sound quality
• With custom rig captures from some of the best producers and sound designers
• Very low latency and unparalleled routing flexibility
• 7" Multi-touch display
• Cabsim with over 1000 impulse responses
• 11 Newly developed combination foot switches with rotary control function
• Volume controls
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power supply via 12 V DC power adapter (included)
• Dimensions (W x D x H): 290 x 191 x 48 mm
• Weight: 1.6 kg

Note: no battery operation possible.

Connections:

• Input 1 & 2: Combo XLR / 6.3mm jack
• FX Loop 1: 2x 6.3 mm jack
• FX Loop 2: 2x 6.3 mm jack
• Output 1 & 2: 2x XLR
• Output 3 & 4: 2x 6.3 mm stereo jack
• Headphone connection: 6.3 mm stereo jack
• Expression 1 & 2: 2x 6.3 mm stereo jack
• MIDI In & Thru / Ou
• USB

• Softlight case
• For Neural DSP Quad Cortex pedal with precision-moulded inlay
• Particularly impact-resistant, protects against damage and weather influences
• Upper folding compartment with elastic neoprene plate for accessories such as cables, tablet, guitar strap etc., separated from the Quad Cortex compartment by a rigid plate
• Side channel for the Quad-Cortex power supply unit
• Rubber handle
• Detachable padded shoulder strap with steel flaps
• External dimensions (L x W x H): 406 x 254 x 127 mm
• Weight: 1 kg
• Colour: Grey

• Steve Vai Signature Model
• Specially developed according to Steve's specifications
• 2 Channels
• Blue channel: delivers everything from radiantly clean to slightly distorted American sounds
• Red channel: offers a variety of Steve's typical high-gain sounds
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume control
• Dimensions (W x D x H): 178 x 140 x 38 mm
• Weight: 454 g
• Made in USA

Synergy IICP; all tube pre-amp module for Synergy Amps; custom designed by Steven Fryette; Based on the original Mark series amp with Its dual-channel design providing instant access to the legendary clean & mid saturated overdrive sounds; brite and shift switches per chanenl as well as the switchable 5-band EQ offer all the versatility this Amp is famous for; 2 x 12AX7 tubes; Controls: Lead Drive, Lead Master, Volume 1, Master 1; Shared Treble, Middle, Bass and Presence controls; Switche: Lead Brite, Lead Shift, Brite, Shift, EQ In/Out 5-Band Graphic EQ; Made in USA

• Based on the classic American 4x 10" Tweed Combo
• 2 Channels
• Tubes: 2x 12AX7
• Control knobs per channel: Gain Volume, Bass, Mid, Treble
• Switch on each channel: Tight and bright
• Dimensions: (W x D x H): 17.8 x 14 x 3.8 cm
• Weight: 454 g

• Preamp, power amp and cabinet simulator
• Fully analogue 0 watt two-channel amplifier
• With cabinet simulator, multi-stage reverb and versatile connection options - all in an extremely small format
• 2 Studio-quality preamps
• Each channel offers: 3 preamp types & 3 gain modes
• Channel A is ideal for aggressive and expressive playing
• Channel B is perfect for clean, blues crunch to rock rhythm guitar
• Includes a full stereo reverb with 3 modes and independent mix control for each channel
• Controls: Gain L&R, Volume L&R, Bass L&R, Mid L&R, Treble L&R, Presence L&R, Resonance L&R, Mic Position L&R, Reverb Mix L&R, Phones Level
• Switches: Input Mode, Mode L&R, Pre-Amp Voicing L&R, Cab Voicing L&R, Spread, Ground Lift, Cabsim
• LED: On
• Input: 6.3 mm stereo jack - Tip: A/B, Ring: B
• Thru: 6.3 mm stereo jack - Tip: A/B, Ring: B
• Output L & R: 2x XLR & 2x 6.3 mm jack
• FX Send: 6.3 mm jack
• Send: 6.3 mm stereo jack - Tip: A/B, Ring: B
• Return L&R: 2x 6.3 mm jack
• Aux input: 3.5 mm stereo jack
• Headphone jack: 3.5 mm stereo jack
• Footswitch connection: 6.3 mm stereo jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 150 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art. 409939)
• Dimensions (W x D x H): 128 x 95 x 45 mm
• Weight: 490 g
• Handmade in Chile

Note: No battery operation possible

• Dynamic, closed headphones with integrated analogue guitar amp technology
• Direct connection to electric guitar or bass possible without additional preamp
• Driver by Audio-Technica
• 40 mm driver
• Frequency range: 20 20,000 Hz
• Max. input level: 1000 mV
• Sound pressure level: 97 dB
• Integrated effects
• Easily accessible switches and controls
• Controls: Gain, Tone, Volume, Effect, Standby
• 6.3 mm Stereo jack input
• 3.5 mm Mini stereo jack AUX input for connecting music players or other audio sources
• Power supply via 2x AAA battery (manganese: 7 h / alkaline: 16 h)
• Dimensions (W x D x H ): 195 x 160 x 50 mm
• Weight (without batteries): 230 g
• Includes 1.6m cable and 2x AAA batteries for function test

• Solid tube
• Developed by Friedman
• Based on the Friedman BE-100 with more gain
• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume controls

• Modelling Dual-DSP effects processor for up to 9 simultaneous effects
• Support for additional (third party) Impulse Responses (IR Loader) via HoTone Editor
• USB port for editing the IRs/effects or for using the Ampero as a USB audio interface
• Drum Machine with 100 patterns
• Integrated looper with 100s Mono und 50s Stereo
• Controls: Volume, Menu/Value
• 3 Rotary buttons for touch screen operation
• Effect on LED
• 4" Touchscreen display with 800 x 480 pixel resolution
• 4 Footswitch buttons
• Expression pedal
• 24 Bit signal processing up to 120 dB S/N ratio
• Power consumption: 500 mA
• Powered by 18V DC power adapter (included)
• Dimensions (W x D x H): 320 x 147 x 46 mm
• Weight: 1.4 kg

Note: Battery operation is not supported.

Included Modellings:

• 244 Effects
• 64 Amp models
• 60 Cab models
• Over 100 pedal models
• 198 Presets
• Microphone Type and Position Modelling
• Black Tech" acoustic guitar simulation

Connectors:

• Input: 6.3 mm jack
• AUX in: 3.5 mm jack
• Stereo Line Output: 2 x 6.3 mm jack
• Stereo Out: 2 x XLR
• EXP In: 6.3 mm TRS jack
• MIDI in: 5-pin MIDI
• Headphone output: 3.5 mm jack
• USB port
• Power adapter connector (female connector 5.5 x 2.1 mm, negative pole inside)