Electric Guitar Preamps

• Solid tube
• Developed by Friedman
• Based on the Friedman BE-100 with more gain
• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume controls

• The same analogue SansAmp circuit, plexi distortion and delay of the first version plus some additional features, such as switch between Plexi and Cali distortion mode, an independent reverb with adjustable room size, an effects loop, tuner, XLR output and a switchable speaker simulation
• Controls: Plexi: Drive, Tone, Level - Boost - Blonde: Drive, Low, Mid, High, Level - Delay: Time, Repeats, Level - Reverb
• Buttons: Plexi / Cali, Boost Pre / Post, Speaker Sim, Delay Drift, Delay 8th, Reverb Size, Ground Lift
• LED: Effect on
• Foot switch: Plexi, Boost, Blonde/Tuner, Delay, Tap/Reverb
• Input (6.3 mm jack)
• Output (6.3 mm jack)
• Effects Loop (2x 6.3 mm jack)
• XLR out
• Power adapter connector (female connector 5.5 x 2.1 mm, negative polarity inside)
• Current consumption: 200 mA
• Power supply with a DC power adapter (Auto-Switching power adapter for voltages of 110 V-240 V with replaceable international plug for EU, UK, Australia/New Zealand included)
• Dimensions (W x D x H): 318 x 64 x 32 mm
• Weight: 587 g

Note: Battery operation is not supported.

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Dimensions (W x H x D): 483 x 139 x 220 mm
• Format: 19" / 3U (since the rubber feet should not be removed for ventilation reasons, a minimumm of 4U rack is required)
• Weight: 4.5 kg
• Colour: Black
• Remote control footboard included

Connections:

• Mic input
• Line in
• Alternative input
• Direct out
• Monitor out
• Master Out (Jack & XLR)
• S/P DIF digital input and output
• MIDI In/Out/Thru
• 2 x Footswitch (jack)
• Network
• USB

• Next generation of Dual DSP-based HX Modeling Engine with 4 discrete stereo signal paths
• 50 Guitar amplifiers
• 12 Bass amplifiers
• 37 Cabs
• 16 Microphones
• 104 Effects
• Imports IRs (impulse responses) up to 1024/2048 sample lengths
• 12 touch-sensitive foot switches
• Pedal Edit Mode for freehand editing
• Near-instant footswitch and controller assignment
• Up to 2 expression pedals
• Wide MIDI control
• Extensive inputs and outputs for the seamless integration of an entire rig
• 8 In / Out USB audio interface
• AES / EBU / L6 LINK (works as SPDIF with adapter) and VDI interfaces
• 123 dB Dynamic range at the guitar input for depth and low noise
• Robust construction
• Dimensions (W x D x H): 52.9 x 30.1 x 9.2 cm
• Weight: 5.44 kg

Bundle offer comprising

• 19" Guitar Preamp

Since the advent of modelling technology in the guitar amplifier world, guitarists have been able to access a variety of sounds and effects with relatively little effort.

But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modelled sounds of the modelling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Format: 19" / 3U (since the rubber feet should not be removed for ventilation reasons, a minimumm of 4U rack is required)
• Dimensions (W x H x D): 48.3 x 13.9 x 22 cm
• Weight: 5 kg
• Colour: Black

Connections:

• Mic input
• Line in
• Alternative input
• Direct out
• Monitor out
• Master Out: Jack & XLR
• S/P DIF digital input and output
• MIDI In/Out/Thru
• 2x Footswitch (jack)
• Network & USB

• USB Stick
• More than 130 official amp sounds for Kemper on USB stick
• Made in a professional recording studio
• To use only with a Kemper amp

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

• 32-bit AD / DA
• 32-bit floating-point processor and 96 kHz sampling rate
• New BOSS DSP engine, specially developed for audio applications
• AIRD (Augmented Impulse Response Dynamics) brings BOSS's Tube Logic concept to a digital guitar processor
• Allows natural integration of external devices
• Extremely dynamically playable amplifiers
• Massive selection of effects including BOSS MDP effects such as DD-500, MD-500, RV-500
• Amplifiers and effects can be interconnected serially and in parallel
• Fast switching of patches with delay / reverb "carryover function
• Innovative stomp box features
• Easy operation with a large display and 6 assignable switches

10 Footswitches, integrated freely assignable expression pedal and coloured LEDs

• High-resolution tuner in 2 display modes
• Mono or polyphonic mode of operation
• Jack output
• XLR sub output with independent AIRD selection
• Loop-in paths for external stereo or mono effects
• Supports external control via footswitch, expression pedal, MIDI, and USB
• Bluetooth for wireless editing of iOS and Android devices
• USB audio / MIDI interface for computer-based recording and editing
• Dimensions (W x D x H): 462 x 248 x 70 mm
• Weight: 3.6 kg

Synergy is a modular principle - Modules can be swapped around as desired and thus different styles can be covered

• Specially developed for the Synergy system
• 2 Module slots
• 4 Channels (if 2 modules are used)
• Tubes: 1x 12AX7
• FX Loop
• XLR DI output
• MIDI compatible
• Rack format
• Made in USA

Note: Modules are not included.

Bundle offer comprising

• Multi-effect pedal for electric guitar and electric bass
• The full DSP capacity of the GT-1000 in a compact format
• With advanced AIRD technology
• 24 Simultaneous effect blocks and over 140 unique amp/effect types
• Fits into any pedalboard setup and works equally well as a stand-alone processor for live and studio use
• Flexible connectivity
• Extensive control options.
• Controls: 1-5, Select, Output Level
• Push buttons: Effect, Menu, Exit, Write, Page
• 256 x 80 dot LC display
• Footswitch: Down, Up, Ctl 1
• Power supply via DC power supply unit (included in delivery)
• Dimensions (W x D x H): 173 x 135 x 65 mm
• Weight: 920 g
• Includes power supply unit

Note: Battery operation is not supported.

Connections:

• Inputs R/Mono & L: 2 x 6.3 mm jack
• Outputs R/Mono & L/Phones: 2x 6.3 mm stereo jack
• Send & Return 1: 2x 6.3 mm jack
• Send & Return 2: 2x 6.3 mm jack
• CTL 2.3/EXP 1: 6.3 mm stereo jack
• CTL 4.5/EXP 2: 6.3 mm stereo jack
• MIDI In & Out: 3.5 mm stereo jack (suitable cable: Art.478220, not included in delivery)
• USB Micro-B
• Power supply connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside.

• Flight Case
• Suitable for Boss GT-1000CORE (article no. 504096)
• Made of 6.5 mm birch plywood
• 22 x 22 mm aluminium edge
• 2 Mini butterfly latches
• 1 Suitcase-style handle
• 4 Small ball corners, cranked
• 4 Small L-ball corners
• 4 Rubber feet 25x10 mm
• Foam
• Cable duct behind the device
• External dimensions (W x D x H): 312 x 285 x 145 mm
• Weight: 2.6 kg
• Colour: Phenol brown
• Made in Germany

• All tube
• Designed by Steven Fryette
• 2 Channels
• Full range of clean, overdrive and high gain distortion sounds
• Controls per channel: Gain I, Gain II, Volume, Bright & Amp More / Less switch
• Common controls: Treble, Middle & Bass

• MK 2 - Completely revised version
• Offers an extended range of all "official" tube amp sounds -from absolutely clean to extremely high gain
• Three-way switch for amplifier characteristics
• Gain Mode and Microphone Position
• Control: Gain, Volume, Treble and Bass
• Ground Lift switch
• Connectors: Jack input, headphone, XLR DI out, headphone output and AUX in
• Aluminium diecast housing
• Powered with 9V batteries or 9V DC power supply (not included - e.g. Article Nr 409939)

• 8 Effects in one housing: Boost, overdrive, distortion, tremolo, phaser, chorus/ flanger, delay, reverb
• No menus, but controls for each parameter
• Built-in tuner
• Various routing options
• Integrated speaker simulation
• Separate footswitches for drive, dist, mod, delay, reverb and tap/ tuner
• Live and preset mode
• Pure boost section controller for boost, bass and treble
• On/ off toggle switch for activating/ deactivating of the pure boost
• Drive section knob for volume, gain and tone
• Distortion section knob for treble, mid, bass, level and gain
• Mid boost toggle switch for additional mid range boost
• Mod section for level, rate and depth
• Modulation tap tempo section knob for setting the tap tempo subsection (whole, half notes, quarter, eighth, triplets, sixteenth, random)
• Toggle switch for selecting the modulation effect (tremolo, phaser, chorus/ flanger)
• Delay section knob for level, time and feedback,
• Delay tap tempo section knob for setting the tap tempo subsection (1/4, 1/8, 1/16, 1/4T, 1/4D, 1/8T, 1/8D)
• Toggle switch for selecting the delay mode (analog, echo, digital)
• Reverb section knob for level, decay, tone, shimmer, mod depth, and mod rate
• Status LEDs
• LED display for tuner/ preset mode
• 6.3 mm Mono jack input
• 2x 6.3 mm Mono jack (L/R) outputs
• 6.3 mm Mono (send/ return) effects loop
• 6.3 mm Stereo jack headphone/ speaker simulation output
• Power supply via optional 9 V DC power supply with 2.1 x 5.5 mm coaxial power connector and polarity (-) inside (Mooer PDNW-9V2A-MP - not included)
• Current consumption: 300 mA
• Dimensions (L x W x H): 370 x 96 x 51 mm
• Weight: 1,200 g
• Incl. case

Note: No battery operation possible.