Guitar Amp Attenuators

• Simple solution to take up the warmth and dynamics of your sound without putting microphones to a speaker during a gig or studio recording
• Connected to tube amp instead of loudspeaker and loads it with 8 Ohm
• Generates a symmetrical as well as assymmetrical signal (without loudspeaker simulation) to be connected to recording devices, effects and power amps
• Recommended max. amp power: 100 Watt RMS
• Dimensions (W x D x H): 22.35 x 22.6 x 9.6 cm
• Weight: 3 kg

• Variable reactive load box connected to an analog Zero Latency Cab and microphone simulation and a digital IR loader
• Allows silent recording of a tube amplifier
• Analog emulation and IR loader can be used individually or simultaneously
• Cab simulation can be deactivated to use an external impulse response (IR)
• 16 Pre-installed Cab-Sims, which can be modified via the supplied GUI
• Additional Cab-Sims can be installed via the USB port on the front
• Placed between amp (max. 200W) and box, the signal can be sent directly to the mixer with one or both Cab simulations
• High quality headphone amplifier
• Amp In with selectable input impedance (4, 8 or 16 ohms)
• AUX input with -20dB pad: 6.3 mm jack
• Transformer-isolated direct output: XLR and 6.3 mm jack
• Output with cab and microphone simulation: XLR and 6.3 mm jack
• Headphone connection: 6.3 mm jack
• Dimensions: (W x D x H): 222 x 156 x 70 mm
• Weight: 3.6 kg

• For home, live and studio use
• Max. power rating: 100 W RMS
• 8 Ohm version
• For playing a tube amplifier at its "sweet spot" and adjusting the volume with the attenuator
• New functions for the Torpedo Captor family include a stereo expander (stereo reverb and double tracker), enhancer, voicing, space, noise gate and XLR DI outputs with 3 routing options (stereo, dual mono and dry / wet)
• Controls: Space, Voicing, Out Level, Preset
• Push buttons: In Level High / Low, Gnd Lift
• Switch: Volume Full / Low
• Headphone output: 6.3 mm stereo jack
• Speaker input: 6.3 mm jack
• Speaker output: 6.3 mm jack
• Left & Right output: XLR
• MIDI input: 3.5 mm stereo jack
• USB
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power supply with a 12 V DC power adapter (included)
• Dimensions (W x D x H): 128 x 175 x 64 mm
• Weight: 1.3 kg

• Analogue reactive loadbox for guitar tube amplifiers
• Five tuned guitar amp attenuation levels
• Rig control for pre-set microphone and speaker box emulations
• UA Dynamic Speaker Modelling accurately models the behaviour of a speaker and membrane resonances
• Integrated UA EQ compression, delay and reverb effects
• Ohm operation selectable (4, 8, and 16 Ohm)
• Max. power handling: 150 W
• Connectors: Line output 6.3 mm jack balanced
• S/PDIF output
• Headphone output: 6.3 mm jack
• Pairing via WiFi with OX mobile or desktop app to edit and save presets (for Windows 10 and macOS: Sierra or High Sierra)
• Suitable cases: Article Nr. 469012 and 505416 (both not included)

• Passive
• Input: Maximum 100W
• 3 Inputs with different impedances (4, 8 and 16 ohms), thus usable with almost all amps
• Speaker output
• Emulated XLR microphone output
• Line output with volume control

• Allows playing a tube amp with high output level for optimal performance, but with reduced volume
• Can be used as a dummy load
• Useful tool for rehearsal, live performance and direct recording
• Does not affect the original character and feel of the amp
• 6 Levels of power reduction
• "Fine" control for the -15dB option
• Input power up to 250 W
• LED for overload function
• Integrated low-noise fan cooling
• 8/16-Ohm option
• Loudspeaker output
• Line output with adjustable level control
• Low impedance XLR DI output
• Works without power supply, but aux power option can be used to keep fan and light stable independent of amplifier power supply
• Dimensions (W x D x H): 235 x 178 x 88 mm
• Weight: 2.67 kg

• All-in-one solution
• For making perfect recordings of guitar and bass sounds, on stage and in the studio
• Reactive load resistance
• -20 dB power reducer
• Analogue speaker simulation
• DI Box
• 8 Ohm version
• Maximum amplifier power: 100 W RMS
• Fan-cooled
• Solid metal case
• Compact size
• Perfect for pedalboards
• Front side: Output Level Switch, Ground Lift, Instrument and Phase Switches, Line Output Jacks, Balanced DI Output & Power Adapters (9 - 24V DC / 5mA - Power Supply not included)
• Rear side: Sockets for Speaker Thru, Speaker Attenuator and Amplifier Input
• Dimensions: 175 x 126 x 62 mm
• Weight: 1 kg
• Includes "Wall of Sound III" plug-in with 16 free virtual cabinets (after registration of the product)

• Full tube compression at room volume
• Reactive Load Technology preserves the tone and dynamics of the amp
• Footswitchable 3 dB / 6 dB solo function
• 6-Level damping provides volume settings for every performance, session or home
• 3-Position presence switch tames unwanted highs
• XLR DI Out with Speaker Simulation
• Power rating: 100 W RMS
• Can be used as a dummy load to provide a correct load for your amplifier without speakers being connected
• Impedance: 4, 8 or 16 ohms
• Control: Attenuation
• Switches: Range Hi / Lo, Solo On / Off, Presence 0 / -3db / -6dB, Impedance, DI Level -10 / -30 dB, Axis Cone / Edge, Ground Lift
• LED: Solo On
• Dimensions (W x D x H): 241 x 260 x 95 mm
• Weight: 6.8 kg
• Includes 12 V DC power supply and foot switch (solo on / off)
• Made in USA

Connections:

• Amplifier input: 6.3 mm jack
• Speaker output: 2x 6.3 mm jack
• Line Out: 6.3 mm jack
• Line Out: 6.3 mm jack
• DI Out: XLR
• Solo footswitch connection: 6.3 mm jack
• Power supply connection: coaxial connection 5.5 x 2.1 mm, negative polarity inside

• A simple solution to capture the warmth and dynamics of your sound without the hassle of removing a speaker during a performance or studio recording
• Is connected in place of the speaker box and provides an 8 ohm load for your tube amp
• Creates a balanced and unbalanced signal that can be connected to recording devices, effects and power amplifiers
• In addition to the original Suhr Reactive Load, the Reactive Load IR adds impulse response technology that provides quick and easy access to a range of professionally microfoned loudspeakers
• 16 Preinstalled impulse responses from Suhr loudspeaker cabinets with Celestion loudspeakers
• Third-party impulse responses can be loaded via the USB port
• Controls: IR Select, HP Level, DI Level
• Switch: Signal 0 / + 6 dB, Hi-Cut
• 6.3 mm Jack amplifier input
• 6.3 mm Jack thru to speaker connection
• 6.3 mm Stereo jack DI / Line Output Un-Filtered
• 6.3 mm Stereo jack DI / Line output IR
• 3.5 mm Stereo jack headphone output
• 3.5 mm Stereo jack aux In
• Power adapter connector (female connector 5.5 x 2.1 mm, negative pole inside)
• Current consumption: 200 mA
• Power supply via 9 V DC power adapter
• Recommended maximum amplifier power: 100 Watts RMS
• Dimensions (W x D x H): 22.35 x 22.6 x 9.6 cm
• Weight: 3 kg
• Includes power supply

• Useful tool for rehearsal room, live and recording applocations
• Tube amplifiers as they sound best - high output level with reduced and controlled volume
• Can also be used as a dummy load
• Input power up to 100W
• LED with overload indicator
• Quiet fan
• Controls: Speaker Level and Line Level
• Inputs: 4/8/16 Ohm
• Balanced speaker output
• XLR DI output with speaker simulation
• Dimensions: 19 x 14 x 11 cm
• Weight: 1.5 kg

• Modern, variable reactive attenuator circuit for tube amplifiers up to 150 W
• Impedance settings for properly adjusting the load resistance of the amplifier
• Preserves the natural sound, the dynamic feel and the individual character of the distortion
• 10 Memory slots
• Versatile parameters controlled via GA-FC / FS foot pedals and MIDI
• Integrated 100 W Class AB power amplifier with discrete analogue design and seamless volume control
• Powerful DSP section
• Customisable stereo effects: Compressor, Delay, Reverb and four EQs
• 22 Speaker-box emulations with five selectable close mic and three surround microphone types plus four slots for uploading your own speaker impulse responses
• External effect loop with selectable serial / parallel operation and control input for switching the amplifier channels
• Parallel speaker output for connecting two speakers for live use
• Balanced XLR line outputs (mono and L / R stereo) for connecting a FOH mixing console, stage monitors and recorders
• Headphone output for quiet practice with fully turned up amplifier sounds
• Editor software (Mac / Windows)
• USB for direct audio recording and communication with the editor software
• Controls: Speaker Out, Line Out, Phones, Resonance Z, Presence Z, Rig, Reverb
• Buttons: Fx Loop, Effects, Solo / EQ, Amp Ctl
• Switches: Speaker Impedance, Input Level, L / R Gnd Lift, Mono (Foh) Gnd Lift, Loop, Level, Send Gnd Lift, Return Gnd Lift, Amp Ctl
• LED: Power, Write, FX Loop, Effects, Solo / EQ, Amp Ctl, Input Sig / Peak, Footswitch:
• Dimensions (W x D x H): 381 x 297 x 111 mm
• Weight: 6.8 kg

Connectors:

• From tube amplifier: 6.3 mm jack
• Speaker Out A&B: 6.3 mm jack
• Line out L/R: XLR
• Line out mono: XLR
• Headphones: 6.3 mm stereo jack
• Send: 6.3 mm jack
• Return: 6.3 mm jack
• FX loop: 6.3 mm jack
• GA-FC: 6.3 mm stereo jack
• Amp Ctl: 6.3 mm jack
• USB B port
• MIDI: In, Thru / Out

• For home, live, and studio use
• Max. power rating: 100 W RMS
• 16 Ohm version
• For playing a tube amplifier at its "sweet spot" and volume control with attenuator
• New features for Torpedo Captor family include a stereo expander (stereo reverb and double tracker), enhancer, voicing, space, noise gate, and XLR DI outputs with 3 routing options (stereo, dual mono, and dry/wet)
• Controls: Space, voicing, out level, preset
• Push buttons: In Level High/Low, Gnd Lift
• Switch: Volume full / low
• Headphone output: 6.3 mm Stereo jack
• Speaker input: 6.3 mm Jack
• Speaker output: 6.3 mm Jack
• Left & right output: XLR
• MIDI input: 3.5 mm Stereo jack
• USB
• Power supply connection: Barrel plug, 5.5 x 2.1 mm, negative polarity inside
• Powered via a 12 V DC power supply (not included)
• Dimensions (W x D x H): 128 x 175 x 64 mm
• Weight: 1.3 kg

• Format: 9.5''/ 1 RU
• Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)
• Reduces the volume of a guitar speaker at full saturation of the tubes
• Made for 16 Ohm loudspeakers
• Bypass/ attenuator switch for fast switching between full and reduced output power
• Input: 1x 6.3 mm jack socket
• Output for loudspeaker 1x 6.3 mm jack socket in parallel
• Output impedance: 16 Ohm

• Is connected between amplifier box output and loudspeakers
• Max. power rating: 150 W
• Impedance: 16 Ohm
• Attenuation steps from -2 dB to - 16 dB in 2 dB steps
• Continuous "Fine" control
• BITE and PUNCH boost switches
• LOAD-BOX operation possible without loudspeakers
• Adjustable LINE-Out
• F.A.N.T.A. out Speaker emulation, low impedance, balanced
• Dimensions: 245 x 120 x 200 mm
• Weight: approx. 2.5 kg
• Colour: Black
• Made in Germany

• Power Attenuator 120 W
• Air cooled
• Speaker simulator and DI box
• 8 Ohm version

• Choosable Impedance for amp output: 4, 8 or 16 Ohm
• Input/output: 6.35 mm mono jack
• Dimensions (HxWxD): 85 x 208 x 179 mm (incl. feet and switches/ knobs)
• Weight: 1.8 kg

Max. Eingangsleistung:

• 4 Ohm: 90 W RMS/ 120 W peak
• 8 Ohm: 200 W RMS/ 260 W peak
• 16 Ohm: 160 W RMS/ 180 W peak

• All-in-one solution
• For making perfect recordings of guitar and bass sounds, on stage and in the studio
• Reactive load resistance
• -20 dB power reducer
• Analogue speaker simulation
• DI Box
• 16 Ohm version
• Maximum amplifier power: 100 W RMS
• Fan-cooled
• Solid metal case
• Compact size
• Perfect for pedalboards
• Front side: Output Level Switch, Ground Lift, Instrument and Phase Switches, Line Output Jacks, Balanced DI Output & Power Adapters (9 - 24V DC / 5mA - power supply unit not included)
• Rear side: Sockets for Speaker Thru, Speaker Attenuator & Amplifier Input
• Dimensions: 175 x 126 x 62 mm
• Weight: 1 kg
• Includes Wall of Sound III (WoS III) plug-in with 16 free Virtual Cabinets (after registering the product)

• All-in-one solution
• For the perfect reduction of guitar and bass sounds, both on stage and in the studio
• Reactive load resistance
• -20 dB power reducer
• Analogue speaker simulation
• DI box
• 4 ohm version
• Maximum amplifier power: 100 watts RMS
• Fan cooled
• Solid metal case
• Compact size
• Perfect for pedalboards
• Front: Output Level, Ground Lift, Instrument & Phase, Line Output, Balanced DI Output & Power Adapters (9 - 24V DC / 5mA - Power Supply not included)
• Rear: sockets for Speaker Thru, Speaker Attenuator & Amplifier Input
• Dimensions: 175 x 126 x 62 mm
• Weight: 1 kg
• Includes Wall of Sound III (WoS III) plug-in with 16 free Virtual Cabinets (after registering the product)

• Load Box and attenuation for amplifying power up to 120 W RMS
• Analogue speaker simulation
• Graphic 11-band EQ
• Switch for EQ, input gain and speaker impedance
• Natural sound at every volume
• Impedance: 8 and 16 Ohm selectable
• Reactive internal network for true amplifier/ load interaction
• High thermal capacity ensures cool running and long life
• Tight impedance tolerances
• XLR and unbalanced line outputs with level control
• Low and high frequency equalization selection
• Full bypass capability with no insertion loss

• Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)
• Reduces the volume of a guitar speaker at full saturation of the tubes
• Made for 8 Ohm or 2x 16 Ohm loudspeakers
• Bypass/ attenuator switch for fast switching between full and reduced output power
• Input: 1x 6.3 mm jack socket
• Output for loudspeaker 2x 6.3 mm jack socket in parallel
• Output impedance: 8 Ohm