Bass Pedals

• Overdrive
• Controls: level/ blend, low, high and drive
• 1 Input
• 1 Output
• 1 Line out (balanced DI out)
• Adaptive distortion" - optimal distortion in any pitch
• Matching power supply optional 409939 (not included)

• 3 Switchable compressor models
• Digital modeling of the side-chain circuits emulation 3 of the most legendary compressors
• Completely analog signal path
• Touch-through metal sensors for ratio and mode
• Controls: Blend, Time, Level, Compression, Ratio
• Switch: Mode
• LED: Effect On, Ratio, Gain Reduction
• Footswitch: Effect Bypass
• Connections: Input (6.3 mm jack), Output (6.3 mm jack), Power adapter connector (female connector 5.5 x 2.1 mm, negative pole inside)
• Power consumption: 250 mA
• Power supply via 9 V DC power adapter
• Dimensions (W x D x H): 42 x 111 x 64 mm
• Weight: 230 g
• Suitable power adapter: Article Nr. 409939 (not included)
• Made in Finland

Note: No battery operation possible!

As the first bass overdrive in the BOSS Compact Effects series, the ODB-3 has been specifically tailored to the needs of today's bass players. It delivers everything, from slightly tweaked sounds to massive overdrive in excellent, impressive quality. The ODB-3 covers the entire frequency range of the bass - down to the deep B on a 5-string - so you always have a first class distortion with a clear, transparent sound. With the BALANCE control you can mix the bass and the effect signal to get the brilliance and the pressure of the original sound fully, even in heavy distortion. The ODB-3 overdrive pedal can also be used as a 2-band equaliser (low / high).

• Tailored to the bass overdrive sounds with pressure and clean, clear sound
• Acting in complete bass frequency range
• Distortion without loss of hardness and brilliance
• Robust, compact design
• Controls: Level, High EQ, Low EQ, Balance, Gain
• Power supply: 9V battery or 9V DC power supply (centre negative both not included, suitable power supply: Art.409939)
• Power consumption: 15 mA
• Dimensions (W x D x H): 70 x 125 x 55 mm

• Compressor / Sustainer especially for bass
• Controls: Volume, Sustain
• 3-Way switch for attack time
• Dimensions (W x D x H): 70 x 115 x 54 mm
• Power supply via 9 V battery or 9 V DC power supply (coaxial connection - negative pole inside, not included, suitable power supply available under Art.409939)

• Booster
• Controls: Volume, Gain 1, Treble, Bass
• Gain 2 control - is switched on when activated
• True bypass switch
• Gain switch
• 2-Band active EQ + - 15 dB

Note: Power supply not included.

Effects for bassists are always a bit tricky. Too much modulation impairs the directness and precision of the sound; moreover, normal guitar effects generally tend to cut the low frequencies of the signal, especially when the bass is a really undesirable side effect. BOSS is one of the first FX companies of the bassists and promises high-quality effect sounds, which should leave the important bass frequencies undamaged. The BOSS CEB-3 essentially corresponds to the CE-5, but has a low filter control, with which the bass range can be adjusted exactly to prevent sound degradation.

From the pioneer of the chorus effect comes the versatile new CEB-3 bass chorus. With it, you can create long-range chorus effects without altering the natural bass sound. In order to give you even more flexibility, we have installed a low filter control, which allows you to determine exactly the frequency that you want to record with Chorus. This gives you an incredible range of effects, from rich, spatial chorus for solos to very easy chorus effects, which only affect the overtones. To adjust the sound even more precisely, rate and depth controls are still installed. With this versatility, it always provides the optimal effect, whether you play with your fingers, with a pick or slaps. In addition, the CEB-3 also has a stereo output, which makes the chorus effect much more spatial. A really ideal effect pedal to expand your expressive possibilities.

• Through the low-pass filter, the chorus effect does not affect the low frequencies and the bass sound remains differentiated and does not mash
• Power consumption: 22mA
• Power supply with a 9 V battery or a 9 V DC power supply (coaxial connector - negative pole / terminal inside - not included in delivery, for example, see item 409939 for availability)
• Dimensions: (WxDxH) 70 x 125 x 55 mm
• Weight: 450 g

Sadowsky SBP-1 - Bass Preamp / DI, bass preamp / EQ / DI effects pedal, offers the same quality Sadowsky electronics that are built into Sadowsky basses, boost only EQ section for Bass and Treble, switchable mute for the instrument, DI output to connect the pedal directly into a PA or recording console, Bass + 18 dB boost at 40 Hz, Treble + 18 dB boost at 4 kHz, true bypass, controls for Volume, Treble, Bass, Ground Lift switch, bypass footswitch (On / Off), Mute footswitch, status LEDs, metal housing, 6.3 mm mono in / output jacks, 6.3 mm mono tuner output, XLR out (DI), power supply via 9V battery or optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, current draw 11 mA, dimensions (L x W x H) 106 x 107 x 61 mm / 4.17" x 4.21" x 2.4", weight ca. 780 g / 1.72 lbs

• Analogue
• Controls for triggers: Sub Octave, Guitar, Octave, Squarewave, Attack Delay, Resonance, Start Freq, Stop Freq, Rate
• Measurements (W x D x H): 120 x 145 x 64 mm
• Includes power supply

• Optimised for electric bass guitar
• The original Whammy effect
• "Classic" and "Chord" (polyphonic) tracking modes
• MIDI Input for controls
• 21 Different programs
• True bypass
• Dimensions (LxWxH): 196.85 x 165.1 x 63.5 mm
• Incl. 9V DC power supply

• Distortion / Fuzz
• Controls for volume - Tone - Sustain
• Mini switch for bass boost
• True bypass
• Long creamy sustain
• Fat fuzz sound
• Discreet heights
• Transparent bass
• Dimensions (WxDxH): 102 x 121 x 89 mm
• Matching power supply: Art. 109004 (not included)

• Bass chorus
• Provides a tight, focussed sound with well defined bass and shimmering chorus
• Crossover switch cuts the lower frequency range from the modulated signal, giving the pedal a more precise bass with improved definition
• Controls: Depth, Rate, Bass, Treble and X-Over Switch
• True bypass
• Power consumption: 15 mA
• Power supply with 9 V battery or 9 V DC power supply, coaxial connection, negative pin inside (e.g. article nr 409939 - not included!)
• Dimensions (W x L x H): 70 x 115 x 54 mm
• Made in the USA

• Dirt Bass Boost
• JFET / Germanium Single Circuit Hybrid Booster
• Gives the treble a nice shine and expands the sound character with some germanium grit
• Modern JFET transistor in the input stage allows harmonic operation
• With active and passive electronics and pickups
• Adjusted control range makes it easier to find the sweet spot for your own equipment
• Volume (boost) control
• Bypass footswitch
• Status LED
• Metal housing
• True hard-wire bypass
• Input: 6.3 mm mono jack
• Output: 6.3 mm mono jack
• Mains adapter connection: Barrel connector 5.5 x 2.1 mm (negative polarity inside)
• Power supply via 9 V battery or 9 V DC mains adapter (both not included)
• Current consumption: 5 mA
• Dimensions (L x W x H): 111 x 60 x 31 mm
• Weight: 198 g
• Made in USA

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.