Bass Pedals

• Distortion / Fuzz
• Controls for: Volume, Tone, Sustain, Blend, Gate, Crossover HPF
• Crossover LPF
• Miniature switch (input 0 / -10 dB)
• Crossover switch
• Bypass switch
• XLR output
• Input and output: 6.3 mm jack
• DI output: 6.3 mm jack
• Dimensions (W x D x H): 120 x 146 x 63 mm
• Power supply via 9 V battery or a 9 V DC power supply (coaxial connection - negative pole inside - not included, e.g. article nr 409939)

• Dual envelope filter
• 2 Low-pass filter (up-attack/ down-attack), single use or together
• Controls for blend - threshold - 2x velocity
• Gig-saver bypass
• Power supply: 9V DC output (power supply not included)

• Compressor
• 2-Band boost
• Controls: Comp, Gain
• LED: Effect On
• Foot switch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative polarity
• Power supply via 9 V DC mains adapter (not included - suitable mains adapter: article no. 409939)

Note: Battery operation is not supported.

• Intelligent multiband compression
• Intelligent circuit adapts the pitch and style of the game, resulting in a natural compression that preserves the fundamental bass sound
• 18 Volt input electronics allow enough headroom for clear and powerful sounds without unwanted distortions
• Gain Reduction Display shows the exact degree of compression
• The digital circuit reduces noise
• Controls: Level, Release, Ratio & Threshold
• Power supply with 9 V battery or 9 V DC power supply (coaxial connection - minus pole inside, not included in the scope of delivery, matching power supply available under Art.409939)
• Measurements: (W x D x H): 70 x 125 x 55 mm

• 2-Band boost
• Controls: 40 Hz bass, 4 kHz treble
• LED: Effect on
• Footswitch: Effect bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connection: coaxial connector 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9 V battery or 9 V DC power supply (suitable power supply Art.409939, not included)

• 3 Switchable compressor models
• Limited edition in black
• By digitally modeling the side-chain circuits of some of the most legendary compressors, the Hyper Luminal captures their
• Characteristic behavior while maintaining a fully analog signal path
• Touch-through metal sensors for Ratio and Mode
• Controls: Blend, Time, Level, Compression, Ratio
• Switch: Mode
• LED: Effect On, Ratio, Gain Reduction
• Footswitch: Effect bypass
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Mains adapter connection (hollow plug socket 5.5 x 2.1 mm, minus pole inside)
• Current consumption: 250 mA
• Power supply via 9 V DC power supply unit (not included in delivery - suitable power supply unit: Article Nr. 409939)
• Dimensions (W x D x H): 42 x 111 x 64 mm
• Weight: 230 g
• Colour: Black
• Made in Finland

Note: Battery operation is not supported.

Bundle offer comprising

• Effect Pedal
• Compressor pedal for electric bass
• CHT "Constant headroom technology" for clean and clear sound quality
• Knobs for output, input, release, attack and ratio
• LED chain with 10 LED for "gain reduction" display
• Status LED
• True bypass
• Sturdy metal housing
• Operated with 9 V battery or Dunlop ECB-003 AC adapter (sold separately, not included here)

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 51 x 102 mm
• Protects effect pedals from dirt and weather influences
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes QuickMount pedal mounting plate type A for RockBoard pedalboards and spare screws

• Compressor
• 3 Switchable compression modes: Tubesim, Multiband and Normal
• Controls: Comp, Sens and Gain
• 3-Way mode selector switch
• True Bypass
• Current consumption: 45 mA
• Power supply via a 9V battery or 9-18 V DC power supply unit (not included in delivery, suitable power supply unit: Article Nr. 409939)
• Dimensions (W x D x H): 67 x 115 x 48 mm
• Weight: 315 g

• Overdrive with audio interface
• The most versatile bass distortion from Darkglass with integrated audio interface, speaker simulation and Bluetooth (Bluetooth audio in and settings via Darkglass Suite app)
• 6-Band graphic EQ
• Headphone output and balanced direct output
• Controls: Compression, Drive, Character, Blend, Level, 6 Band Eq.
• Footswitches with integrated rotary controls - each of which stores compression, distortion, impulse responses, EQ parameters and signal chain settings
• Instrument input: 6.3 mm jack
• XLR Di-Out (Ground Lift)
• Balanced output: 2x 6.3 mm jack
• Aux input: 3.5 mm
• Headphone output: 3.5mm
• Midi input: 3.5 mm
• Digit cutout interface: USB-C
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 500 mA
• Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)
• Dimensions (W x D x H): 180 x 120 x 60 mm
• Weight: 0.700 kg

Note: Battery operation is not supported.

• The Octamizer adds a tone that is one octave lower to the original bass signal
• Controls for Octave Level - Clean Level - Octave Filter - Clean Tone
• With Gig Saver function (signal transmission even when the battery is low)
• Can be operated with a 9 V battery or a mains adapter (not included in delivery)

• Bass Overdrive
• Analog design
• Separate Drive & Blend (Wet / Dry) controls
• Treble & Volume controls
• True bypass
• Metal housing
• Power supply via 9 V battery or 9 V power supply (not included, suitable power supply available under article nr 409939)
• Dimensions: 11.4 x 6.6 x 5.6 cm
• Weight: 272 g

• 3 Completely independent pedals in one housing
• Signal flow: Bass-> Low Gain Overdrive-> High Gain Overdrive-> Boost-> Amplifier
• Overdrive Low Gain control (Bass Boost switch): Level, Tone, Drive
• Overdrive High Gain control (switch for Bass Boost): Level, Tone, Drive
• Control Clean Boost (switch for Bass Boost and + 20dB Level Boost): Level, Tone
• Push buttons: 3x True Bypass
• Switch: Locked for overdrives
• LED: Effect on
• Footswitch: Effect bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connection: coaxial connector 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 50-100 mA
• Power supply via 9 V DC power pack (not included, suitable power pack: Art.409939)
• True bypass
• Dimensions (W x D x H): 145 x 120 x 378 mm
• Weight: 600 g
• Handmade in Germany

Note: Battery operation is not supported.

• A clean preamp that amplifies attack and presence while shaping the mid-range for a very percussive and aggressive character
• With a sound circuit that can be controlled with the character knob
• An active 3-band equalizer with semi-parametric midpoints
• Suitable as a supplement to distortion pedals as well as a stand-alone bass preamplifier
• Controls: Boost, Character, Mid Gain, Mid Freq, Bass, Treble
• LED: Effect On
• Foot-switch: Bypass effect
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Power supply with a 9 V DC mains adapter (not included - suitable mains adapter: Article Nr. 409939)
• Dimensions (W x D x H): 64 x 111 x 43 mm
• Weight: 250 g
• Made in Finland

Note: Battery operation is not supported.

• Compressor pedal for electric bass
• CHT "Constant headroom technology" for clean and clear sound quality
• Knobs for output, input, release, attack and ratio
• LED chain with 10 LED for "gain reduction" display
• Status LED
• True bypass
• Sturdy metal housing
• Operated with 9 V battery or Dunlop ECB-003 AC adapter (sold separately, not included here)

• Equalizer
• Controls: High Pass, Low Pass, EQ Output Level, Low, Low Mid, Mid, High Mid, High
• LED: Effect On
• Footswitch: Filters Bypass / EQ Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connection: Barrel connector 5.5 x 2.1 mm
• Power supply via 9-18 V DC mains adapter (not included in delivery, suitable mains adapter: Art.409939)
• Power consumption: 40 mA
• Dimensions (W x D x H): 104 x 127 x 59 mm
• Weight: 0.6 kg
• Made in USA

• For E-Bass
• Classic Analog envelope filter sounds
• True bypass
• Controller for Dry, FX, Decay, Q and Sens.