Distortion Pedals

• Fuzz
• Accurate recreation of a 1972 'Triangle Knob' muff version
• Beautifully rich and complex saturation full of colour, character and sustain
• Less saturation and slightly less mid-scoop than current muff pedals
• Authentic, contemporary Carbon Composition resistors
• NOS Ceramic Disc capacitors
• Hand-selected transistor sets
• Controls for volume, sustain, tone
• Bypass footswitch
• Status LED
• Heavy-duty folded-steel metal cabinet
• True hard-wire bypass
• Input: 6.3 mm mono jack
• Output: 6.3 mm mono jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9 V battery or 9 V DC mains adapter are both not included in the delivery
• Current consumption: 5.5 mA
• Dimensions (L x W x H): 140 x 90 x 41 mm
• Weight: 624 g
• Made in USA

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Overdrive
• Controls: Honey (Gain), Flavour (Tone), Weight (Volume)
• "Breakup" like tube amp
• True bypass design
• Power supply: 9 V, 36 mA
• Dimensions: 11.43 x 5.7 x 5.7 cm
• Weight: 0.23 kg
• Hand-built in California, USA

• Overdrive
• Authentic Friedman tube amplifier sound
• Controls: Volume, Gain, Tight, Bass, Treble and Presence
• True Bypass
• Power supply via 9 V-DC (coaxial connection - minus pole inside, not included, corresponding power supply available under Article Nr 409939)
• Made in the USA

• Combines WHE Pork Loin Bass Overdrive and WHE Russian-Pickle Fuzz in one compact pedal
• Parallel clean channel with fade and tone controls mixes clean signal and drive sounds
• True bypass
• Controls for Volume, Tone, Drive, Clean Blend, Clean Tone
• OD/Fuzz toggle-switch for selecting the drive mode
• Internal trim-potis for Pickle Volume, Pork Volume, Pork Curve,
• Pork presence
• Bypass foot-switch
• Status LED
• 6.3 mm Mono jack input / output
• Power supply via 9 V battery or 9V DC power supply (Dunlop ECB 003, not included in delivery) with 2.1 x 5.5 mm hollow plug, polarity (-) inside
• Current consumption: 18.5 mA
• Metal casing
• Dimensions (L x W x H): 104 x 61 x 53 mm
• Weight: 260 g

Note: Register your product at https://shop.warwick.de/en/warrantyregistration and extend the warranty to 4 years.

• Fuzz/Distortion
• Very flexible, well balanced BM-style pedal
• Three different gain modes
• Pre- or post-EQ
• Clean blend
• Active bass and treble controls
• Parametric mid EQ controllable via footswitch and expression pedal as well as a switchable top boost for even more raw bite
• Controls: Disruption, Clean, Master, Highs, Lows, Mid Freq, Mids Cut/Boost
• Switch: Clip Style, EQ Position, Top Boost
• LED: Effect On, Mids
• Foot switch: Effect On, Mids
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Expression pedal input: 6.3 mm stereo jack
• Power supply connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 160 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art.409939)
• True bypass
• Dimensions (W x D x H): 121 x 146 x 60 mm
• Weight: 520 g
• Handmade in Germany

Note: Battery operation is not supported.

• Versatile high-gain distortion with the sound and response of a high-quality 100-watt tube amp
• Controls for Dist, Level, Tone
• Handset: Voice
• Footswitch: Effect Bypass
• Connections: Input (6.3 mm jack), mono / stereo output (6.3 mm jack), - 9 V DC power supply connector (coaxial jack 5.5 x 2.1 mm - negative pole inside)
• Power consumption: 8 mA
• Power supply via 9 V DC power supply (not included, matching power supply available under Article Nr. 409939)
• True bypass
• Dimensions: 462 x 977 x 480 mm
• Weight: 165 g

• Hot Rod Distortion
• Offers distortion sounds from clean to high-gain
• Controls: Contour, tone, master, preamp
• LED: Effect On
• Footswitch: Effect bypass
• Input (6.3 mm jack)
• Output (6.3 mm jack)
• AC adapter connection (hollow plug socket 5.5 x 2.1 mm, negative polarity inside)
• Current consumption: 9.5 mA
• Power supply via 9-18 V DC power adapter (suitable power supply article no. 409939 - not included)
• True bypass
• Dimensions (W x D x H): 106 x 91 x 34 mm
• Weight: 245 g
• Made in Croatia

Note: Battery operation is not supported.

• The next step up from Lightspeed Overdrive with more gain and two clipping levels
• Rich overtones & amazing sustain
• Extended presence for better assertiveness in the mix
• Controls: Volume, Drive, Range
• LED: Effect off / on
• Foot-switch: Bypass effect
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Power adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole insidePower consumption: 10 mA
• Power supply via 9 V battery or 9 V DC power supply unit (suitable power supply unit Article Nr. 409939, not included)
• True bypass
• Dimensions (W x D x H): 67 x 120 x 55 mm
• Weight: 270 g
• Handmade in USA

• Overdrive / boost
• Successor model of the GAS-728 NG guitar
• 2 Completely separate pedals in one housing
• Separate deep boost for overdrive and clean boost
• Optimized Overdrive and clean boost circuit for guitar
• New vintage plexi design
• True bypass
• Controls: 2x Tone, Drive, Tone, 2x Level, Clean Boost, Overdrive
• Pushbuttons: 2
• Switches: On (+20dB), 2x Deep, Gain
• LED: Effect On
• Foot-switch: Bypass effect
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Power supply adapter connection (hollow plug socket 5.5 x 2.1 mm, minus pole inside)
• Current consumption: 50 mA
• Power supply via 9-18 V DC power supply unit (not included in delivery - suitable power supply unit: Article Nr. 409939)
• Dimensions (W x D x H): 95 x 120 x 33 mm
• Weight: 500 g

Note: Battery operation is not supported.

• Dual overdrive
• On the left a modified Bluesbreaker, on the right a Boutique Tube Screamer
• The modified Bluesbreaker circuit simulates a tube amp with warmth, dynamics and headroom
• Boutique overdrive offers a dynamic crunch sound
• NOS "mojo" diodes
• Controls: Level, tone, gain, level, tone, drive
• Internal clipping DIP switch and internal bass DIP switch
• LED: Effect On
• Footswitch: 2 x effect bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Power consumption: 10 mA
• Power supply with a 9 V battery or a 9 V DC mains adapter (not included in delivery - suitable mains adapter: Art. 409939)
• True bypass
• Dimensions (W x D x H): 120 x 52 x 97 mm
• Weight: 400 g
• Made in Hungary

• Low Gain Overdrive
• Controls: Gain, Treble, Mids, Bass, Volume
• LED: Effect On
• Footswitch: Effect Bypass
• Connections: Input (6.3 mm jack)
• Output (6.3 mm jack)
• Mains adapter connection (hollow plug socket 5.5 x 2.1 mm, minus pole inside)
• Power supply with 9 V battery or via 9 V DC power supply unit (suitable power supply unit Article Nr. 409939, not included)
• Current consumption: 15 mA
• True Bypass
• Dimensions (W x D x H): 65 x 125 x 53 mm
• Weight: 587 g

• Reverb & Fuzz
• 3 Built-in effects: Ergosphere = modulation delay / Event Horizon = spatial reverb with pitch shifting / Singularity = fuzz
• Effects can be used individually or simultaneously
• From warm and harmonic delays and crazy space landscapes to total sound decomposition
• Modulation delay controls: Mix, Time, Feedback, Speed, Modulation
• Reverb controls: Mix, Pitch, Radiancy, Echo
• Fuzz controls: Disintegrate
• LED: Singularity On, Event Horizon On, Ergosphere On
• Footswitch: Singularity bypass, Event Horizon bypass, Ergosphere bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power adapter connector: AC adapter, 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 250 mA
• Operates via 9 V DC power supply unit (not included, suitable power supply available under Article Nr 409939)
• Dimensions (W x D x H): 189 x 120 x 56 mm
• Weight: 800 g
• Handmade in France

Note: Battery operation is not supported.

• Overdrive
• Analogue operation
• Wide range of intense but usable overdrive, distortion and fuzz sounds
• True bypass
• 5 Selectable Post Amplifier Channels: Twin-T Scoop / War Fuzz / Dual J-FET / Octave Rect / Gain X1000
• Integrated tunable frequency equaliser
• Volume, Drive and Sweapable frequency equaliser controls
• 5-Way rotary switch for selecting the Post Amplifier
• Bypass footswitch
• Status LED
• Metal housing
• Power supply via 9 V battery or 9 V DC power supply with 2.1 x 5.5 mm coaxial connector and polarity (-) inside (power supply not included)
• Power consumption: 5.8 mA
• 6.3 mm Mono jack input / output
• Dimensions (L x W x H): 150 x 116 x 64 mm
• Weight: 510 g
• Handmade in New York City, USA

• Overdrive
• Newly developed circuit that comes close to the tube sound of the Blackstar HT pedal series
• Gain Level and Tone controls
• Status LED
• Stable space-saving metal housing
• Operation with 9V battery or optional mains adapter Art.409939 (not included)

Tone City Dry Martini - Overdrive, effects pedal, inspired by a very popular, aggressive-sounding white and black boutique overdrive pedal from the USA, can be used as a low-gain boost or as a potent medium-gain drive, higher gain settings create a powerful and punchy medium-gain drive that verges on full-on distortion, Strong switch increases the low-end definition, true bypass, controls for Volume, Tone, Gain, Strong toggle switch, bypass footswitch, transparent knob with status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 8 mA, dimensions (L x W x H) 94 x 45 x 48 mm / 3.70" x 1.77" x 1.89", weight ca. 262 g / 0.58 lbs

• Overdrive
• Inspired by the sound and feel of legendary British stack amp models
• 2 Switchable classic circuits 19 (without master)/22
• Controls: Vol I, Vol II, Variac, Master, Presence, Bass, Middle, Treble, Gain Boost (internal trimmer)
• Switch: 19/22
• LED: Gain Boost, Effect On
• Footswitch: Gain Boost, Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 30 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art. 409939)
• True bypass
• Dimensions (W x D x H): 73 x 123 x 55 mm
• Handmade in Greece

Note: Battery operation is not supported

• Classic warm boutique-style overdrive
• Great sound diversity from vintage overdrive to modern high gain
• Heavy duty housing suitable for stage applications
• True bypass
• Controls: Gain, Clean, Tone, Level
• On/Off switch with LED status
• Input and output: 6.3 mm Jack
• Operation via 9 V battery or 9 V power adapter (not included, e.g. article nr 409939)
• Dimensions with controllers (W x H x D): 120 x 56 x 95 mm
• Weight: 0.350 kg

• Distortion
• Inspired by 80s Guitar Heroes high gain distortion sounds
• Developed in close cooperation with the famous Marshall amp designer Santiago Alvarez
• Bass Boost switch adds bass without mashing
• Controls: Volume, Gain, Presence
• Switch: Bass Boost
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Power supply via 9 V battery or 9 V DC power supply unit (suitable power supply unit Art. 409939, not included in delivery)
• Dimensions (W x D x H): 59 x 112 x 31 mm
• Made in Germany

EarthQuaker Devices Hizumitas, fuzz / sustainer effects pedal, designed for Wata, from the legendary Japanese band Boris, faithful sonic recreation of Wata's crushing go-to fuzz: the Elk BM Sustainar, offers loads of heavy distortion and smooth sustain with an underlying grit, excellent response to different pickup types and playing dynamics, unique Tone and Sustain controls greatly impact the distortion's character, offers plenty of output Volume (unity is around 9-10 o'clock, everything above that is set to destroy), all-analog signal path, true bypass (silent relay-based switching), controls for Volume, Sustain, Tone, bypass footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 10 mA, dimensions (L x W x H) 120.65 x 63.50 x 57.15 mm / 4.75" x 2.50" x 2.25", weight ca. 425 g / 0.94 lbs, made in USA