Equalizer Pedals

• 5-Band Guitar Equaliser
• True bypass to eliminate signal interference when switched off
• Solid metal housing
• Volume control
• 100 Hz, 250 Hz, 1.6 kHz and 4 kHz controls with +-18 dB
• Level control
• On/Off switch
• 6.3 mm jack input and output
• Current consumption: 20 mA
• Power supply via 9V mains adapter - centre negative (not included)
• Dimensions: 92 x 38 x 32 mm
• Weight: 133g

• Graphic 10-band equaliser
• Frequency range from 31.25 Hz to 16 kHz
• True bypass
• Ambient LED lighting
• Aluminium housing
• 1 x 6.3 mm jack input
• 1 x 6.3 mm jack output
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm coaxial connection, polarity (-) inside, not included in delivery, matching power supply: Art.409939)
• Power consumption: approx. 30 mA
• Dimensions: 125 x 78.5 x 48 mm
• Weight: 316 g

Artec is THE Korean pickup specialist for acoustic guitars and solid bodies The team around mastermind Byoung-Yul Lim has been in the last two years very busy developing an independent range of analogue pedals and combo amplifiers. The result is excellent and it does not need to shy away from international comparison. Published test reports in professional journals make a clear statement on the quality.

Again and again, effects makers are trying a Parametric EQ, but somehow guitarists (...are we too stupid?) can't seem to get their heads around the devices. There is no more effective sound processing if you really want to change your sound specifically. It's not that hard. Raise the frequency with the gain control and turn the freq knob until you find what's annoying you. Now lower this frequency until it does not annoy anymore and use the width control to tailor how wide the cut should be. This can be simply decided by ear. It is even easier if you want to boost something; e.g. nice mids for the lead sound. Also here: raise, pick out frequency and determine width. And use the level control so that the EQ sound is about the same volume as the unprocessed one. Or turn up the level and heat up the amp when wanting to conjure a lead sound from a single channel amp.

The Artec Parametric EQ can do it all for very little money.

• Controls: FREQ / WIDTH / GAIN / LEVEL
• True Bypass
• Power supply: 9-volt battery or power supply (both optionally available)
• Heavy zinc die-cast housing
• Dimensions (W x D x H): 75.5 x 116 x 49 mm
• Weight: 340 grams

• Graphic 10-band equalizer
• / -12 dB boost or cut per frequency band
• 2 Outputs for splitting the signal
• Low noise, true bypass
• Regulator for Volume Gain 31 Hz, 62 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz
• Illuminated sliders (status LEDs)
• Aluminum housing
• 6.3 mm mono jack input
• 2 x 6.3 mm mono jack output
• Power supply over 18 V DC Power supply Dunlop ECB-004 (2.1 x 5.5 mm hollow plug, polarity (-) inside, included)
• Power consumption: 48 mA
• Dimensions (L x W x H): 124 x 92 x 54 mm
• Weight: 700 g

Bundle offer comprising

Specially tailored to the needs of bass players, it has 3 controls for the very critical mid frequencies of 400 Hz, 500 Hz and 800 Hz, which determine the fundamental character of the bass sound. Each of the 7 frequencies can be raised or lowered over a range of ± 15 dB. This makes the special character of every gaming technique perfectly clear, from dynamic fingerpicking to aggressive slapping,

• 7-band graphic equaliser
• Specifically for the frequency range of the electric bass
• Since the frequency range is up to 50 Hz, the GEB-7 is also suitable for matching the bass of a double bass with pickup
• Dimensions (WxDxH): 73 x 129 x 59 mm
• Weight: 440 g
• Power consumption: 16mA
• Power supply with a 9V battery or a 9V DC power supply (coaxial connection - negative pole / terminal inside, not included) - For example, see Art. 409939 for availability

• Protective Cover
• Fits Boss Compact Series effect pedals in the familiar standard size
• Suitable for most effect pedals with housing dimensions of approx. 120 x 65 x 55 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 55 x 111 mm
• Protects effect pedals from dirt and weather
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes silicone adhesive pad and spare screws

• Graphic EQ 8 band graphic EQ
• Dimensions (WxDxH): 75.5 x 116 x 49 mm
• Power supply with 9V battery or power supply not included (recommended type 109004 or Multi power supplies such as 264101)

• Equaliser
• Tailored to the needs of modern musicians
• 2 Parametric center controls make it possible to precisely adjust the desired sound
• High output to boost the amp preamp
• Controls: Volume - Bass - Mid1 Level - Mid1 Freq - Mid2 Level - Mid2 Freq - Treble
• LED: Effect On
• Footswitch: Effect Bypass
• Connections: Input (6.3 mm jack) - Output (6.3 mm jack) - Power supply connector (coaxial connection 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: max. 31.9 mA
• Power supply with a 9 V battery or a 9-18 V DC power supply (not included - suitable power supply: Art.409939)
• True bypass
• Dimensions (W x D x H): 64 x 114 x 38 mm
• Weight: 590 g
• Made in USA

Note: no battery operation possible.

• Stereo equaliser
• 2x 10-band EQ - optionally parallel, serial or stereo
• Stereo sound in 32 bit / 96 kHz studio quality
• 4 Memory locations
• LED display
• Controls: 10 sliders 30 Hz-12.8 kHz, level, channel, memory
• 2 Footswitches
• 2 x 6.3 mm jack inputs (A / mono B), 2x 6.3 mm jack outputs (A / mono B), 6.3 mm jack input for external switches or expression pedal, MIDI, USB
• Power supply with three AA batteries or 9 V DC mains adapter (not included - suitable mains adapter: Art.409939)
• Power consumption: 170 mA
• Dimensions (W x D x H):101 x 138 x 63 mm
• Weight: 630 g

• Analogue operation
• Up to +/- 15 dB Mid Boost or Cut
• Center frequency adjustable from 400 Hz to 7.5 kHz
• Switchable Q setting (LO / HI)
• True bypass
• Controls for Volume, Mids and Sweep
• Lo / Hi toggle switch to select the Q-setting
• Bypass footswitch
• Status LED
• Metal housing
• 6.3 mm Mono IN / OUT jacks
• Power supply via optional 9V DC adapter with 2.1 x 5.5mm barrel connector and polarity: (-) inside (power supply not included)
• Power consumption: Less than 100 mA
• Dimensions: 66 x 122 x 40 mm
• Weight: 290 g

Note: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.

• 10-Band equalizer
• 10 Editable frequency bands from 31 Hz to 16 kHz with +/- 18 dB boost/cut per band
• Parametric control options change frequency range or Q-factor
• 4 onboard presets - or 8 in preset extension mode
• 128 MIDI presets
• Additional, adjustable +12 dB clean boost
• Completely MIDI-capable
• External expression and switching control
• Integrated noise gate, limiter and tuner
• Output and control knobs for EQ parameters
• Select/Save button
• Status LEDs
• Universal bypass
• Selectable between analogue-buffered or relay-switched true bypass
• 2 x 6.3 mm TRS stereo jack inputs
• 2 x 6.3 mm TRS stereo jack outputs
• MIDI IN and MIDI THRU connections
• Mini USB port for connection to PC (Windows and Mac compatible) and remote control (MIDI)
• 3.5 mm source audio control input for connection to compatible source audio devices (dual expression pedal, tap switch)
• Power supply via 9V DC (SR SA 153) power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Power consumption: 165 mA
• Housing made of brushed anodised aluminium
• Dimensions (L x W x H): 114 x 70 x 51 mm
• Incldues power supply unit

Note: Battery operation is not supported.Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Graphical 6-band equalizer
• / -18 dB boost or cut per frequency band
• Illuminated sliders (status LEDs)
• Low noise
• True Bypass
• Regulator for 100 Hz, 200 Hz, 400 Hz, 800 Hz, 1.6 kHz and 3.2 kHz
• Aluminum housing
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)
• Power consumption: 14.5 mA
• Dimensions (L x W x H): 110 x 60 x 50 mm
• Weight: 350 g

• Single-band parametric equaliser with some extras
• The frequency response can be tilted variably around the centre frequency from low-pass to high-pass
• An expression pedal can control the centre frequency
• Fully variable Q that switches to self-oscillation
• CV inputs for resonance (Q) and frequency (F)
• Synthesiser interface with V/octave scaling
• Controls: Freq, Q, Gain, Tilt, Vol
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 150 mA
• Power supply via 9 V DC mains adapter (not included in delivery - suitable mains adapter: Art.409939)
• True bypass
• Dimensions (W x D x H): 95 x 122 x 50 mm
• Weight: 360 g
• Made in Canada

Note: Battery operation is not supported.

• 7 Equaliser bands
• Frequency range: 50 - 10000 Hz with 15 dB boost / cut per band
• Controls: 50 - 120 - 400 - 500 - 800 - 4,5k - 10k - Level
• LED: Effect On / Off
• Footswitch: Effect Bypass
• True bypass
• Connections: input (6.3 mm jack), output (6.3 mm jack), power supply connector (coaxial connection 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: 30 mA
• Powered by a 9V battery or a 9V DC power supply
• Dimensions (W x D x H): 70 x 123 x 54 mm
• Weight: 330 g
• Suitable power adapter: Art.409939 (not included)

Bundle offer comprising

• Graphic Equalizer For Electric Guitar

Another boss-babe who has made a career on countless professional pedalboards. 7 frequency bands, which are tailored to the needs of guitarists, make it possible to fine-tune the sound. If you want to filter out the centre of clean sounds, or you need more singing mids in the lead channel, everything is possible. With the 100 Hz control, even a bit more steam in the bass can be added to a combo without drowning out everything at the same. With the level control, a boost / attenuation of +/- 15 dB is possible, so the GE7 is also ideally suited to boost a tube amp without falsifying the fundamental sound.

• 7-band EQ from 100 Hz to 6.4 kHz with / -15 dB each
• Ideal for guitar sounds
• Perfect as a boost pedal for solos, for switching to an alternative sound or for eliminating feedback, especially when connected to a distortion amplifier
• Power consumption: 10 mA
• Measurements (WxDxH): 73 x 129 x 59 mm
• Weight: 450 g
• Power supply with a 9V battery or a 9V DC power supply (coaxial connection - negative pin inside - not included, e.g. Art. 409939)

• Protective Cover
• Fits Boss Compact Series effect pedals in the familiar standard size
• Suitable for most effect pedals with housing dimensions of approx. 120 x 65 x 55 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 55 x 111 mm
• Protects effect pedals from dirt and weather
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes silicone adhesive pad and spare screws

Now you can use seven EQ tapes to refine your sound and remove feedback! This pedal is convincing with a frequency response of 100 Hz to 6.4 kHz and a generous 15 dB boost / cut. A status LED for effect activation and battery check is included. An electronic on / off switch ensures quiet switching. The power supply is via a 9-volt battery or a DC adapter (not included).

• Floor / foot pedal
• 7 EQ tapes to refine your sound and remove feedback
• Wide frequency response from 100 Hz to 6.4 kHz with generous 15 dB boost / cut
• Status LED for effect activation and battery check
• Operation via 9-volt battery or Behringer PSU-SB DC power adapter (not included)
• Electronic on / off switch for silent switching

• Graphic 5-band EQ
• Gain range: / - 18 dB
• Frequency bands: 100 Hz, 250 Hz, 630 Hz, 1.6 kHz, 4 kHz
• Level regulator
• True Bypass
• Measurements (HxWxD): 52 x 42 x 93.5 mm
• Weight: 160 g
• 9V DC power supply is required (power supply is not included)

The Graphic Eq & Tuner is a double-pre-mix: an 8-band graphic equalizer allows you to tailor a desired sound, the frequencies are really well chosen. So you have practically a second sound available per amp channel.

If you press the tuner button, you can be correct with the help of the LED display. So you save yourself the precious space on the pedalboard for an additional pedal. It's virtually two for the price of one with the two parts being on one individual piece!

• Equalizer / tuner
• 8-band graphic equaliser and chromatic tuner in one housing
• Frequency bands: 100/170/280/500/800 / 1.4 k / 2.3 k / 5 k / GAIN
• Jack input and output jack
• Power supply: 9-volt battery or 9-volt power supply
• Heavy zinc die-cast housing
• Dimensions (W x D x H): 76 x 116 x 49 mm
• Weight: 340 g

API TranZformer LLX Bass Pedal; Proprietary API 2510 OpAmp; Signature API output transformer; 3-band EQ each with +/-15 dB of gain; OpAmp overdrive circuit; 40 dB of gain; -20 dB output pad; bypass switch; connections: 1x Hi-Z input 6.3 mm jack, 1x Hi-Z output 6.3 mm jack; power supply via external power supply 9 -18V DC / 100mA, 2.1 x 5.5 mm (not included); Dimensions: approx. 11.68 x 9.65 x 7.6 cm; weight: 0.79 kg

• Outboard EQ, Preamp and 3 Band Equalizer with extensive adjustment possibilities for acoustic guitars
• Controls: Treble / Middle/ Bass / Volume
• True bypass
• Power supply: 9-volt battery (Article number 417473 - not included) or power supply (Article number 409939 - not included)
• Dimensions (W x D x H): 75.5 x 116 x 49 mm

Another boss-babe who has made a career on countless professional pedalboards. 7 frequency bands, which are tailored to the needs of guitarists, make it possible to fine-tune the sound. If you want to filter out the centre of clean sounds, or you need more singing mids in the lead channel, everything is possible. With the 100 Hz control, even a bit more steam in the bass can be added to a combo without drowning out everything at the same. With the level control, a boost / attenuation of +/- 15 dB is possible, so the GE7 is also ideally suited to boost a tube amp without falsifying the fundamental sound.

• 7-band EQ from 100 Hz to 6.4 kHz with / -15 dB each
• Ideal for guitar sounds
• Perfect as a boost pedal for solos, for switching to an alternative sound or for eliminating feedback, especially when connected to a distortion amplifier
• Power consumption: 10 mA
• Measurements (WxDxH): 73 x 129 x 59 mm
• Weight: 450 g
• Power supply with a 9V battery or a 9V DC power supply (coaxial connection - negative pin inside - not included, e.g. Art. 409939)