Volume & Expression Pedals

• Static remote control for pedals equipped with an expression control jack
• Toggle instantly between two preset expression pedal values
• TRS+/- button for maximum compatibility with devices by other makers
• Controller: Exp 1, Exp 2
• Switch: TRS +/-
• LED: Exp 1, Exp 2
• Footswitch: Exp 1/2
• Connections: Exp Out (6.3 mm stereo jack)
• Power adapter connector: Barrel connector, 5.5 x 2.1 mm, negative polarity inside
• Powered via a 9 V battery or 9 V DC power supply (not included - corresponding power supply available under Article Nr 409939)
• Includes a 180 cm (6") cable

• Controls the volume or effects parameters
• Passive - does not require a power supply
• Patented Low Friction Band-Drive
• Uses a 250 kOhm potentiometer in volume mode and 10 kOhm potentiometer in expression mode
• Internal 50 KOhm TRIMPOT for setting the minimum value in heel-down position in expression mode
• Internal switch to reverse heel/tow functionality
• Internal switch for selecting the TUNER/EXP AUX output functionality
• Adjustable torque for increasing and decreasing pedal resistance
• Aluminium housing
• 6.3 mm Mono jack input and output
• 6.3 mm TRS jack AUX/TUNER
• Dimensions (W x D x H): 75 x 155 x 65 mm
• Weight: 580 g

Note: Register your product at www.w-distribution.de/Warranty to extend the warranty to 4 years.

• For electric guitars, electric basses, and keyboards
• Automatically detects the output source (volume- or expression function)
• Lightweight housing
• Jack input and output
• Passive design, no power supply or battery required
• Dimensions: 148.5 x 65.5 x 61 mm
• Weight: 250 g

• Expression pedal especially for use with the Kemper Profiler
• Equipped with a spring load that returns the pedal to the heel position when the foot is removed from the pedal to lend the feeling of a spring load wah pedal, or when you use the pedal with auto on/off detection
• Linear potentiometer that is precisely matched to the specifications of the Kemper Profiler for precise and natural control
• Works with all Kemper Profiler models
• Colour: Green
• Dimensions (L x W x H): 251 x 99 x 76 mm
• Weight: 1.43 kg

• Volume / Expression
• Creates super smooth, uniform volume swells, or control your favourite FX parameters
• Patented Low Friction Band-Drive
• Internal trim-pot for setting minimum heel-down value
• Internal switch for reversing foot/heel polarity
• Adjustable torque allows an increase or decrease in resistance
• Metal housing
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• 6.3 mm mono jack tuner output
• 6.3 mm stereo jack expression output (TRS)
• Passive operation (no power supply required)
• Dimensions (L x W x H): 203 x 102 x 76 mm
• Weight: Approx. 0.95 kg

Note: Register your instrument at www.w-distribution.de/Warranty to extend the warranty to 4 years.

• e.g. for keyboards
• Exceptionally robust version
• High-quality bushings
• Dimensions (WxDxH): 9 x 7 x 20.5 cm
• 2
• Connections on the front side
• Made in Europe

• Provides wireless foot control for Boss Eurus GS-1 synth guitar (Art.524461 - not included) and Waza-Air headphones (Art.480241 - not included), as well as music apps on mobile devices and anything that can receive CC commands via Bluetooth MIDI
• USB connection and MIDI stereo jack for wired control
• se all three outputs simultaneously with independent MIDI CC settings
• Supports communication with Roland WM-1 and WM-1D wireless MIDI adapters
• Built-in toe switch with on/off indicators on both sides of the pedal
• Control input for up to two BOSS FS series footswitches
• iOS/Android app for assigning MIDI CC numbers, customising response and more
• Powered by two AA batteries or Boss PSA power supply (Art.102842 - not included)
• Dimensions (W x D x H): 62 x 200 x 87 mm
• Weight: 600 g

Both volume control and access to individual effect parameters are possible in realtime - resulting in incredibly flexible effects!

• Can be used as Volume, Reverb, Delay Times, Distortion Amounts, and any other parameter of a Zoom effect.
• Specifically designed for the ZOOM 500 series, the Player Series, the Rhythm Trak 234, the 8050 and the FC50, but also the 9150 and 9150, 1010, 2100, 2020 and 3030 in the same way as the fc-50 or 8050 pedals
• Dimensions (LxWxD): 20 x 9 x 7 cm
• Includes 160 cm / 1/4" to 1/4" cable

With its high-impedance design, the pedal is interesting for guitarists who want to control the volume of their guitar (and thus also the distortion of the amp) by pedal. The FV 500 fulfils this task - in contrast to most guitar potentiometers - practically without sound loss - particularly before the preamp of the amp! The tuner out is also very practical; With a connected tuner you can tune silently!

• Input Phone Jack x 2
• Output Tuner Out
• Dimensions 86 (W) x 200 (D) x 54 (H) mm
• Weight: 400 g

• Mini Series
• Metal housing with metal 'feet' that extend out
• Analog
• Status LED
• Input / Output: 6.35 mm Mono jack
• Powered via 9V DC power supply (not included, corresponding model: Article Nr 409939)
• Dimensions (L x W x H): 94 x 55 x 48 mm
• Length when folded out: 128 mm
• Weight: 460 g

• With low impedance and stereo input/output for effect pedals and keyboards
• Compact aluminium housing
• Dimensions (W x D x H): 80 x 192 x 58 mm
• Weight: 0.84 kg

• Aluminium housing
• Low impedance
• Input and output jacks on the front side
• Expression pedal connection
• Pedal can be used as volume and expression pedal
• Control for minimum volume
• Ideal for keyboards, effects and transmitters

• For Cantorum keyboards

• e.g. For keyboards and effects processors
• Highly robust construction
• Built-in 1.3 m cable with stereo jack plug
• Not suitable for Yamaha and Korg (different polarity)

• Control for minimum volume
• Cable length 2 m with 6.3 mm stereo jack plug
• Dimensions (W x H x D): 86 x 54 x 200 mm
• Weight: 400 g

• Compatible with a large selection of digital amplifiers, effects devices, MIDI controllers and effects pedals
• Extended adjustment range and a sealed 10K linear potentiometer designed specifically for this purpose
• Two output sockets: 6.3 mm TRS for the expression pedal and 6.3 mm TRS for the switch
• Robust metal casing
• Dimensions (L x W x H): 251 x 99 x 76 mm
• Weight: 1.43 kg
• Colour: Black

Note: Due to the TRS (stereo) jack, the switch can also be used on Expression Pedal inputs. It "mimics" an expression pedal that is either at its maximum or minimum position (TRS cable required)

A standard mono-jack cable can be used for connection to standard push-button inputs.

• 2 Outputs
• Active, wear-free expression pedal equipped with a precise magnetic sensor
• 2 Digital potentiometers with analogue voltages for the precise and reliable generation of expression data
• Both outputs can be used with almost all common devices with expression inputs from 5k to 100k , including TS, TRS and/or RTS
• Polarity can be switched and stored via soft-push buttons
• The 10k output can be set as a latching- or momentary switch
• Via a USB jack you can send MIDI data to a computer for the control of MIDI-compatible software
• Resistance value of the potentiometer: 5-100 kOhm
• Button: Polarity
• LED: Polarity
• Connections: 2x 6.3 mm stereo jack
• Dimensions (W x D x H): 90 x 200 x 47 mm
• Weight: 766 g
• Made in Germany

• TRS plug (balanced, 6.3 mm jack)
• Resistance in expresson mode: 10 kOhm

• Operates wear-free via a precision magnetic sensor
• Without a mechanical potentiometer
• Volume from -92 dB (mute) to 0 dB (unity gain), or +12 dB (boost with adjustable potentiometer)
• No damping of higher frequencies
• No sound loss
• Supply voltage is rectified, filtered, stabilized and doubled to 18V
• Total dynamic range of 110 dB by use of a Blackmer VCA
• Low-friction bearings
• Finely adjustable brake
• Buffered direct-out as an output for a tuner or second amp
• Power supply via a 9V - 15V DC or oder 7 - 12 V AC (coaxial power connector - polarity is not relevant, corresponding power suppy available under Article Nr 409939 (not included, must be ordered separately)

• For the Line6 MM 4
• Incl. cable