Controller Modules

• Joystick with X-/Y-axis
• Rotation function (Z-axis) and gate button
• X-, Y- and Z-axis self-resetting via spring mechanism
• CV outputs for X-, Y- and Z-axis in non-inverted and inverted form (range: -5 V to +5 V)
• CV offset controller per axis
• 4 Quadrant CV outputs (Q1-Q4) with adjustable overlap (range: 0 V to +10 V)
• Gate output
• Current requirement: 50 mA (+12 V) / 20 mA (-12 V)
• Width: 12 HP
• Depth: 50 mm
• Joystick height: 70 mm

• 8 Buttons for manual generation of gate signals (+5 V)
• 4 of the 8 channels have signal inputs and can be used as momentary switches
• Current consumption: 10 mA (+12 V) / 10 mA (-12 V)
• Width: 8 HP
• Depth: 25 mm

• For connecting with the Doepfer ribbon controller
• Produces a control voltage for the pitch of the oscillators
• 2 Sub units: Position and pressure
• Width: 8 HP
• Depth: 40 mm
• Power requirement: +40 mA (+12V) / -20 mA (-12V)

Only module is included, controller not included and must be ordered separatley!

• Foot controller connector and dual foot switch connector to provide analogue control voltages (foot controller) and two gate / trigger signals (footswitches) to control other A-100 modules
• Width: 4 HP
• Depth: 30 mm
• Current consumption: +10mA (+12V) / -10mA (-12V)

• Consists of Doepfer A-198 Module and Ribbon Controller
• Ribbon Controller: Generates a control voltage for the pitch of the oscillators by touching the position sensor
• Further control voltage can be generated via integrated pressure sensor
• Two sub-units: position and pressure
• Controller dimensions: approx. 600 x 30 x 30 mm (with hood on right edge)
• Eurorack format
• Width: 8 HP
• Depth: 40 mm
• Power requirement: + 40mA (+ 12V) / -20mA (-12V)

• With two modulation wheels
• The factory setting is a spring loaded wheel on the left side with bipolar voltage output (i.e. 0V in the centre position, positive voltage in the upper range, negative voltage in the lower range; voltage range approx. -5.5 V ... 0 V ... +5.5 V)
• The wheel to the right side is without spring and has a positive voltage output (i.e. 0V in the lowest position and positive voltage when operated upwards; voltage range approx. 0...+8 V)
• For the spring loaded wheel a voltage "plateau" around 0 V is the preset, so the output voltage is always 0 V in a small range near to the centre position
• Width: 14 HP
• Depth: 40 mm
• Power requirement: +10 mA (+12 V) / -10 mA (-12 V)

• Module combination outputs the manually generated 1V / octave control voltage and up to 15 different gate and trigger signals
• "Send" module A-173-1 with 18 keys and octave switch
• "Receive" module A-173-2 with 15 gate / trigger outputs, 1V / octave compatible CV output and normal gate output
• Outputs individually switchable between gate or toggle mode
• Learn Function allows you to decouple individual keys from the CV path
• Width: 2 x 6 HP
• Depth: 45 mm
• Power requirement: +100 mA (+12 V) / -10 mA (-12 V)

• Multidimensional touch controller
• 12 Touch-sensitive gold-coated contact surfaces
• Per surface: tuning control (0-12V) and CV outputs for position, pressure and gate
• Master outputs for position, pressure, gate, as well as for the adjustable CV signal (e.g. for pitch)
• Fixed CV output provides a scaled voltage of 0-12V distributed over the 12 areas
• Current consumption: 140mA (+12V) / 115mA (-12V)
• Width: 42 HP
• Depth: 15 mm

• Morphing Effects Matrix
• Mixes, distributes and morphs an audio/CV signal between 6 send/return paths
• Manual control via central encoder, CV input (with attenuator), direct selection via push-button or sequentially via clock input
• 6 Different morph settings with different characteristics
• Attack and release times selectable
• Suitable for audio and CV signals
• Current consumption: 52 mA (+12 V) / 26 mA (-12 V)
• Width: 14 HP
• Depth: 25 mm

ADDAC 311 Ultra Floor Control; Eurorack module with floor pedal; allows the use of up to 5 expression pedals and 5 foot switches to generate control voltages, gate and trigger signals; floor pedal with 5 inputs for expression pedals (TRS pinout); input 4 configurable for RTS pinout via jumper; input 5 configurable for TS pinout via jumper; for each expression pedal input: attenuverter (-5V to +5V), pedal mode selector and LED monitor; 5 footswitches, each with status LED, selectable polarity and mode switch (Gate, Trigger, Latch); Eurorack module with 10 outputs (x5 expression CV, x5 gate/trigger); connection between module and floor pedal via DB25 cable (length 3.0m, included); power consumption: 100mA (+12V) / 50mA (-12V); width: 6 HP; depth: 25mm; floor pedal dimensions (WxDxH): 320 x 150 x 60mm; floor pedal weight: 1kg

• CV Preset Manager
• 3 Channels, each with adjustable fixed voltage via rotary control
• CV input per channel allows use as unipolar attenuator or bipolar inverter
• CV output per channel
• Voltage range: 0 V to +5 V or -5 V to +5 V
• The status of all channels can be stored in 8 presets
• Presets can be set manually
• Switched or morphed by CV signal or clock signal
• Current consumption: 55 mA (+12 V) / 15 mA (-12 V)
• Width: 6 HP
• Depth: 30 mm

• Controller module with touch plates that generate a gate signal (gate out) proportional to the pressure intensity and pressure duration
• Cascadable up to 4 pressure points
• Current consumption: 20 mA @ + 12V, 0 mA @ -12V
• Dimensions: 20 HP x 24 mm (max depth)
• Optional expander module: Article Nr. 414539 (not included)

• Generates a gate signal and an AD envelope from the user's heartbeat
• Controls for attack, decay, amplitude and offset
• Positive and inverted envelope output
• Trigger output, sensor input
• Current requirement: 60 mA (+12 V) / 10 mA (-12 V)
• Width: 4 HP
• Depth: 35 mm
• Includes clip sensor for attachment to finger or earlobe

• 5-Channel CV source & patch controller
• Voltage range per channel definable via "Minimum" and "Span" controls (offset to minimum)
• Voltage curve of each channel selectable via switch (minimum to maximum or vice versa)
• Transition slider controls the CV curve of all 5 channels simultaneously
• Output voltage per channel selectable between +5V and +10V
• CV In for transition controller
• 5 x CV Out
• Current consumption: 40 mA (+12 V) / 20 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm

• 8 Illuminated switches for manual generation of a fixed voltage (+5 V)
• 4 of the 8 channels have signal inputs and can be used as latching switches
• Current consumption: 10 mA (+12 V) / 10 mA (-12 V)
• Width: 8 HP
• Depth: 25 mm

• Responds to the vertical position of the finger and the applied pressure
• Can be configured in different modes
• The selected mode determines which type of signal (CV, note, trigger, gate, etc.) is sent from each of the eight independent outputs
• Multi-colour LEDs for control
• Width: 20 TE / HP
• Depth: 19 mm
• Power requirement: +130 mA (+12 V) / -15 mA (-12 V)

• Converts the signal of an external light sensor (LDR) into control voltage
• Sensitivity and gain control for adaptation to the LDR signal
• Selector switch for 3 response times
• Positive and inverted CV output
• Each with offset control
• LDR connection via normal 3.5 mm mono patch cable
• Light sensor included
• Current consumption: 50 mA (+12 V) / 50 mA (-12 V)
• Width: 4 HP
• Depth: 45 mm

Endorphin.es Total Recall Silver; Eurorack module; CV Preset Manager; 3 channels with an adjustable fixed voltage each; CV input per channel allows the use as an unipolar attenuator or a bipolar attenuverter; CV output for each channel; voltage range: 0V to +5V or -5V to +5V; the setting of all channels is stored in up to 8 presets; presets can be switched or morphed manually, by external CV or clock signals; power consumption: 55mA (+12V) / 15mA (-12V); width: 6 HP; depth: 30mm

• Generates variable control voltage by bringing the hand closer to the antenna
• Distance range: approx. 30 cm
• Max. output voltage: +10V
• Eurorack format
• Current: +60 mA (+12 V) / -20 mA (-12 V)
• Width: 8 HP / 40.3 mm
• Depth: 40 mm, measured from the rear side of the front panel
• Black front panel