Interface Modules

• Allows the integration of the A-100 module system into a USB or MIDI system
• 4 Analogue CVs
• Gate signal
• Width: 6 HP
• Depth: 55 mm
• Power consumption: + 12V: 60mA/ -12V: 10mA

• Eurorack module
• Audio Interface
• 2x 6.3 mm Jack output - TRS balanced
• 6.3 mm Stereo jack headphone output with separate volume control
• Cue input
• Current consumption: 24 mA (+12 V) / 26 mA (-12 V)
• Width: 4 TE
• Depth: 35 mm

• 8-Channel Trigger to MIDI converter
• Converts 8 analog trigger or gate signals to MIDI notes and velocity values (Accent function)
• Modes for 3-8 triggers on 1-4 MIDI channels
• MIDI channels, note values and accent values freely adjustable
• 3.5 mm TRS to MIDI adapter included in delivery
• Current consumption: 20 mA (+12 V) / 0 mA (-12 V)
• Width: 4 TE
• Depth: 20 mm

• Amplifies guitar signals to modular system level
• Instrument input: 6.3 mm Jack
• 2 Line Outputs: 3.5 mm Mini jack (+18 dB)
• 2 Line inputs: 3.5 mm Mini jack (-18 dB)
• 2 Outputs: 6.3 mm Jack (L/R)
• Current consumption: +12 V Max. 10 mA, -12 V max. 10 mA, +5 V 0 mA
• Dimensions (W x D): 4 TE / HP x 38 mm

• With LED display
• Connections: MIDI input, MIDI output, CV1, CV2, Gate, Clock, Reset
• 3-Digit LED display
• Eurorack format
• Power requirements: +200 mA (+ 12 V) / -40 mA (-12 V)
• Width: 10 HP / 50.5 mm
• Depth: 30 mm (measured from the rear side of the front panel)

• Programmable multifunctional module
• Based on the OWL platform from Rebel Technology
• Pre-installed patches: Silky Reverb, Harmonic Oscillator, Tap Tempo Delay, MIDI to CV interface
• 4 assignable control knobs and 2 buttons for patch parameters
• 4 CV inputs with attenuator
• USB host and USB device ports
• 2 audio inputs
• 2 gate inputs
• 2 CV outputs and gate output
• 2 audio outputs
• Power supply: 140 mA (+12 V) / 15 mA (-12 V)
• Width: 12 TE
• Depth: 25 mm

• Up to four CGM Group can be connected to one Masterone (no stand-alone output module)
• Controls for PFL mix, headphone volume and level for stereo & mono outputs
• LED level meter
• Balanced stereo output: 2 x XLR, switchable between line and mic level
• Unbalanced stereo output: 2 x 6.3 mm jack, switchable between line and instrument level
• Mono output: 6.3 mm jack
• Stereo headphone output: 6.3 mm jack
• Power consumption (maximum): 110 mA (+12 V) / 105 mA (-12 V)
• Width: 12 TE
• Depth: 38 mm

• Can be used as a crossfader between two signals or as an insert for external effects
• Euro rack format
• Width: 8 HP
• Depth: 40 mm
• Power consumption: +20 mA (+12V)/ -20 mA (-12V)

Module A-119 is used to integrate external audio signals into the system A-100, and includes the components pre-amplifiers, envelope follower and a comparator. The preamplifier has two inputs: the unbalanced input with a gain factor of 0 ... 20 is mainly used for line-level signals, while the balanced input has a gain factor of 0 ... 500 for the integration of low-level signals (microphone , Electric guitar).

The envelope follower generates an envelope at its output, corresponding to the signal profile of the external audio signal. The comparator generates a gate signal corresponding to the level of an adjustable trigger threshold. Three LEDs are used to control the amplification (overdrive), the envelope and the gate signal.

• Width: 8HP / 40.3 mm
• Depth: 45 mm (measured from the rear of the front plate)
• Power requirements: 30 mA (12 V) / -20 mA (-12V)

• Stereo audio interface
• 2 Inputs for external signals, e.g.: synthesiser, effect pedals, dynamic microphones, guitars, with gain control of max. +30 dB, for adjustment to Eurorack level
• 2 Outputs with level control to adjust from Eurorack to line level
• Outputs can also be used as stereo headphone outputs
• LED level indicators for inputs and outputs
• Connection to other 4ms Listen modules or WAV recorders possible via jumper cable
• Current consumption: 62 mA (+12 V) / 55 mA (-12 V)
• Width: 6 TE
• Depth: 24 mm

• Voltage controlled MIDI controller
• Converts the signal from 8 faders and 8 buttons into freely assignable MIDI controllers
• CV input per fader and gate input per button
• 2 Aux CV inputs
• Supported controllers: CC, Note, Program change, Clock, ST/SP, NRPN
• Allocations can be saved
• Class-Compliant USB-MIDI-Interface and 5-Pin DIN Output
• Current consumption: 64 mA (+12 V) / 12 mA (-12 V)
• Width: 20 TE
• Depth: 30 mm