Allround Microphones

The MD 441 U is a microphone of an exceptional quality: its acoustic properties correspond to those of a condenser microphone. Transient response and low distortion are ensured even at extremely high sound pressure. Surface: all metal body with black imitation leather finish, sound inlet basket: nickel plated

• Very feedback resistant
• Super-cardioid
• Tunable HP and HF shelve, XLR
• Impedance: 200 Ohm
• Frequency range: 30 Hz - 20 kHz
• Size: 270 x 33 x 36 mm
• Weight: approx. 450 g
• Incl. clamp and storage box
• Suitable matching clamp: Article Nr 106538 (not included)

• Directional characteristic: Hypercardioid
• Frequency range: 60 - 14,000 Hz
• Impedance: 600 Ohm
• Affordable beginners' microphone for amplified and acoustic instruments
• Carefully selected frequency range for optimal sound reproduction
• Dynamic element arrangement with directional effect
• Robust metal casing
• Hi-ENERGY® neodymium magnet for improved output and transient response
• The soft touch surface reduces mechanical noise
• Silent switching on and off via Magnalock™ switch
• Gold-plated XLR connectors with corrosion resistant contacts
• Microphone holder and bag included
• Ideal for snare and amp miking

• Switchable low-cut
• Polar pattern: Supercardioid
• Frequency range: 40 - 18000 Hz
• Sensitivity: 3.5 mV / Pa, -49 dBV / Pa
• Signal-to-noise ratio: 75 dB (A)
• Equivalent noise level: 19 dB (A)
• Dynamic range - passive mode: 135 dB
• Dynamic range - Active Mode: 121 dB
• 0 dB gain, 115 dB / 6 dB gain, 109 dB / 12 dB gain
• Gain settings: 0 dB, 6 dB, 12 dB
• Linear attenuation: 150 Hz (12 dB / octave), 250 Hz (12 dB / octave)
• Internal resistance: 600 ohms
• Nominal load impedance: 1000 ohms
• Supply voltage: 48 V ± 4 V
• Current consumption: 5.5 mA
• Gold-plated 3-pin XLR connector
• Weight: 0.34 kg
• Includes microphone clip, windscreen and transport bag

• Directional characteristics: Omnidirectional
• Frequency range: 40 - 20,000 Hz
• Sensitivity: 16 mV/Pa
• Maximum sound pressure: 125dB
• Impedance: 200 Ω
• 3-Pin XLR connector
• 24 - 48 V Phantom power required
• M20 thread
• Dimensions: 83 mm (12 mm above the surface)
• Diameter: 28.5 mm
• Colour: White

• PG Alta series
• For voice transmission and karaoke
• Cardioid
• 70 / 15,000 Hz
• 600 Ω
• Sensitivity at 1 kHz: -53.5 DBV / Pa (2.10 mV)
• With switch
• Colour: Black
• Silver basket
• Weight 300g
• Incl. 4.5 m XLR cable, holder and pocket

• With dualdyne double membrane technology
• Minimal proximity effect and minimal axial sound colouration
• The signal is received in its natural state for uncoloured reproduction
• Polar pattern: Cardioid
• Frequency range: 40 - 16,000 Hz
• Impedance: 300 Ohm
• Sensitivity: -51.5 dBV / Pa / 1.85 mV / Pa
• Aluminium housing
• Microphone mesh head is made of hardened steel
• Colour: Black
• AK8C zipper bag and A25E microphone holder included

Bundle offer comprising

• Dynamic Instrument Microphone
• Ideal for snare and amps
• Cardioid polar pattern
• Frequency circumference: 60 - 16000 Hz
• Sensitivity: 2.5 mV / PA, -52 DBV / PA
• Internal resistance: 500 ohms
• Nominal load impedance: 1000 ohms
• Gold-coated 3-pin XLR connection
• Weight: 0.28 kg
• Includes microphone clip, windshield and transport bag

• Microphone stand with boom arm
• Length: ca. 92 to 150 cm
• Boom arm length : 70 cm
• Thread: 3/8" and with a 5/8" adapter
• Weight: 2.2 kg
• Colour: Black

With the SC450 the t.bone has brought in the market a large diaphragm microphone at an amazing price. New standard for professional and project recording studios for a remarkable price. The SC450 uses 6 micron, gold plated diaphragm (1") for a transparent and clear sound, wide dynamic range and an extended frequency response. The -10 dB and low-cut filter switch offers versatility for every stage and studio applications.

• Two measured SC450 Studio large-diaphragm microphones
• Cardioid
• External low cut and -10 dB pad switch
• Balanced transformer
• Incl. shock mounts

Technical data:

• Frequency range: 20 - 18,000 Hz
• Sensitivity: 18 mV/Pa -37 +/- 2 dB (0dB = 1V / Pa 1000 Hz)
• Polar Pattern: Cardioid, Diversity> / = 12 dB (300-3000 Hz)
• Impedance: 200 Ohm
• Equivalent Noise Level 17dB (A weighted)
• Max. SPL for 0.5% THD @ 1000Hz: 120 dB
• Power Requirement: Phantom Power 48V +/- 4V
• Connections: 3-Pin XLR
• Size: max. Diameter: 50.5 mm x 190 mm
• Case included

• With USB Type-C and XLR connection
• Suitable for broadcasts, podcasts, studio etc.
• Built-in pop filter and shockmount to reduce vibration noise
• Cardioid characteristic reduces feedback
• Shielded against electromagnetic noise
• Sample rate: 24 bit / 96 kHz
• Frequency range: 20 - 20,000 Hz
• Sensitivity: -57 dB (+/-3 dB)
• Output impedance: 320 Ohm
• 3-Pin XLR connector
• 5/8" Recording
• Also suitable for mobile devices in conjunction with an OTG adapter
• 3.5 mm headphone jack for monitoring via software
• Dimensions without bracket (Ø x L): 50 x 140 mm
• Dimensions with bracket (L x W x H) 200 x 90 x 50 mm
• Weight: 450 g
• Colour: Black
• Includes 2 m USB-C to USB-A cable

• Lockable switch
• Super-cardioid
• 50 / 16,000 Hz
• 250 Ω
• Incl. bag and microphone clip

• For drums, percussion, wind instruments and guitar amplifiers
• Directional characteristics: Cardioid
• Frequency range: 40 - 18,000 Hz
• Output level: 152 dB SPL max.
• Robust metal housing and wire-mesh cap
• Weight: 200 g
• Dimensions: 110 x 79 x 44 mm
• Colour: Black
• Incl. microphone bag, microphone clamp/holder

• Polar pattern: Cardioid
• 17 mm Electret capsule
• Frequency response: 70 - 20,000 Hz
• Sensitivity: -25 dBFS (min. gain), 15 dBFS (max. gain)
• Max. sound pressure level: 120 dB (140 dB with clipguard)
• Dynamic range: 95 dB (115 dB with Clipguard)
• Sample rate: 48/96 kHz
• Resolution: 24-bit
• Integrated noise filter prevents overemphasised plosive sounds and breathing noises
• Capacitive sensor for silent mute function
• Wave Link app
• Adjustable desktop stand with microphone adapter
• USB-C port
• Stereo headphone output 3.5 mm mini jack
• System requirements: Windows 10 (64 bit)/macOS 10.15 or newer, free USB 2.0 port, 4 GB RAM
• Dimensions: 153 x 66 x 40 mm
• Weight micro and U-mount: 280 g
• Weight stand: 305 g

The WL series are Lavalier microphones with permanently polarised condensate capsules for use with wireless pocket transmitters. Each microphone has a 1.2 m long cable with a 4-pin miniature connector. For great flexibility, the integrated necktie clamp can be rotated in 90 degree increments.

WL184 (Super cardioid polar pattern): for applications where ambient noise must be effectively suppressed and a narrow recording angle is required. The use of a draft shield is strongly recommended. Recording angle 115 degrees.

• Modular - with interchangeable electret condenser capsule
• Polar pattern: Super cardioid
• TQG connector for wireless application
• Including wind and meeting protection
• Two different clip-on clamps and pocket
• Transmission range: 50 Hz - 17 kHz
• Output impedance: 1.8 kO
• Noise Sensitivity: -45.5 dBV / Pa (10 mV)
• Maximum sound pressure level: 130.5 dB SPL
• Noise (equivalent sound pressure level): 28.0 dB (A)
• Dimensions (L x Ø): 22 x 12 mm Power supply: +5 V (1,5 - 10 V)
• Temperature range: -18 ° to 57 ° C
• Relative humidity: 0 to 95%

• For vocals, toms and brass instruments
• Polar pattern: Supercardioid
• Frequency range: 50 - 16,000 Hz
• Output impedance: 150 Ohm
• Dimensions (L x Ø): 160 x 43 mm
• Weight: 275 g
• Includes microphone clamp and bag

Bundle offer comprising

• Large-Diaphragm Dynamic Microphone
• Directional characteristic: Cardioid
• Bass roll-off switch
• Variable-D design
• Frequency range: 45 / 18,000 Hz
• Dimensions (diameter x length): 49 x 54 x 217 mm
• Weight 1474 g
• Incl. clamp and storage box
• 3 Year manufacturer's warranty
• Remark: Ideal for bass drums, wind instruments, and speeches

• Affordable Microphone Stand with Boom arm
• Second microphone can be mounted next to the locking screw of the boom arm
• 3/8" Threaded connector
• Cast metal base
• Foldable feet
• Max. Height with Boom arm: Approx. 210 cm
• Weight: 1.60 kg
• Colour: Black

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• Suitable for e.g. vocals and percussion
• Polar pattern: cardioid
• Frequency range: 40 - 16,000 Hz
• Impedance: 350 Ohm
• Without switch
• DImensions: Ø 48 x 180 mm
• Weight: 330 g
• Incl. clamp and bag

• Polar pattern: Cardioid
• Switchable -10dB PAD
• Frequency response: 20 - 20,000 Hz
• Max. SPL: 140/150 dB (THD = 0.5%)
• Electrical impedance: 200 Ohm
• Requires phantom power
• Diameter: 53 mm
• Length: 162 mm
• Net weight: 320 g
• Colour: Black
• Incl. shock mount

• Polar pattern: cardioid
• Frequency response: 20 - 20,000 Hz
• Sensitivity: 19 mV / PA (-34.5 DBV)
• Max. Sound pressure level: 136/156 DB SPL (0/20 DB PAD)
• Pad switchable: 0 dB, 20 dB
• Dimensions per microphone (H x D): 120 x 23 mm
• Weight per microphone: 128 g

Note: Requires 48 V phantom power.

• Directional characteristics: Super cardioid
• Frequency range: 50 - 18,000 Hz
• Impedance: 325 ohms
• Max. SPL:> 135 DB
• Dimensions (L x Ø): 184 x 48 mm
• Weight: 387 g
• Includes microphone clip bracket and bag

• Polar pattern: supercardioid
• Very high sensitivity
• Frequency range 40 Hz - 20 kHz
• High SPL
• Effective suppression of rear incidental noise
• Excellent feedback resistance
• Especially for overhead, hi-hat, woodwinds and string instruments
• Phantom power 12-52 V/ 3 mA required