Allround Microphones

Bundle offer comprising

• Large diaphragm studio microphone
• With a 1.07" double diaphragm, switchable polar pattern (omnidirectional, cardioid, eight) and high-pass filter, the SC1100 is suitable for all studio situations.
• Switchable polar pattern: Omni-directional, figure-eight and cardioid
• Low cut switch
• Frequency response: 20 - 20.000 Hz
• Sound pressure limit: 123 dB
• Sensitivity: 39.4 mV/Pa
• Output impedance: 200 Ohm
• Distortion:
• Equivalent noise level [dB(A)]: 8.2 (ball)/ 6.8 (super-cardioid)/ 6.7 (eight)
• Power supply via phantom power 48 V (±4 V)
• Weight 941 g
• Includes aluminum case and new shock-mount

• Microphone stand Thomann Type I
• Plastic base
• Height is adjustable from 900 to 1600 mm
• Boom arm: 810 mm
• Weight: 2.3 kg
• Colour: Black

• Pop Filter
• Two widely spaced fabric layers (distance: 2.5 cm)
• Screw-on
• With 30 cm elastic arm
• Diameter: 15 cm (incl. Frame), 13 cm (nylon Schrim)

• Professional microphone cable
• Length: 6 m
• Black Yongsheng XLR plug (made by Neutrik)
• Incl. hook and loop fastener

• Specifically for instrument and voice recording
• 30 - 20,000 Hz
• 250 Ω
• 137 dB SPL max.
• Battery powered with 1.5V AA or phantom power
• Dimensions (length/ diameter): 194.2 x 26 mm
• Incl. AT8405a stand clamp with 5/8"-27 thread, AT 8136 windshield

• With integrated Rycote lyre bracket
• High pass filter switchable
• Level adjustment (-10 dB / +20 dB) switchable
• On/Off switch
• Charge status LED indicator
• Transducer type: Pressure gradient transducer
• 2x 1/2" condenser capsule
• JFET impedance converter
• Directional characteristic: 2x cardioid (X/Y)
• Frequency range: 40 Hz - 20 kHz
• Inherent noise: 20 dBA
• Dynamic range: 114 dB
• Sensitivity: 38.0 mV/Pa
• Maximum sound pressure: 134 dB (1 kHz, 1% THD, 1 kOhm load)
• Output impedance: 200 Ohm
• Maximum output level: +4.2 dBu (1 kHz, 1% THD, 1 kOhm load)
• Connector Type: 3.5 mm mini jack
• Power supply via 9 V battery (over 100 hours continuous operation, not included)
• Dimensions (W x D x H): 80 x 115 x 134 mm
• Weight: 116 g
• Improved foam windshield included

• Omnidirectional
• Frequency range: 20 - 20.000 Hz
• Max. SPL: 137 dB
• Impedance: 250 Ohm
• Switchable low cut at 80Hz
• Operates with 1.5V AA batteries or 10-52 Volt phantom power
• Length: 178.0 mm
• Incl. AT8405a stand clamp, AT8136 windscreen, batteries, microphone case

• Flexible earhook
• Solid and robust cable
• Directional characteristic: Omnidirectional
• Frequency range 20 - 20,000 Hz
• Peak SPL: 107 dB
• Connection: 4-Pole Shure TQG connector
• Weight: 19.76 g
• Colour: Black
• Incl. bag WA153, 3x windscreens and clip

• For recording and live applications
• Polar pattern: cardioid
• Frequency range: 50 - 16 kHz
• Sensitivity: -58 dB (1.3 mV) ref 1V at 1 Pa
• 1 kHz
• Output impedance: 200 Ohm
• Switch for low-cut: 200 Hz
• Articulation boost: 3 - 5 kHz
• Apollo Channel Strip preset frequencies
• Integrated bracket and foam windscreen
• Connector: XLR
• Dimensions (length x diameter): 195 x 60 mm
• Weight: 735 g
• Incl. thread adapter 5/8" to 3/8

Bundle offer comprising

• Dynamic Instrument Microphone
• For live and studio applications
• Supercardioid
• Frequency range: 50 - 16,000 Hz
• Sensitivity: 2.7 mV / Pa, -51.5 dB re 1 V / Pa
• Peak SPL: 132 dB
• Impedance: 415 Ohm
• Dimensions: 52 x 165 mm
• Weight: 270 g
• Microphone holder and plastic case included

• Microphone stand with boom arm
• Length: ca. 92 to 150 cm
• Boom arm length : 70 cm
• Thread: 3/8" and with a 5/8" adapter
• Weight: 2.2 kg
• Colour: Black

• Microphone Cable
• XLR 3-pin male XLR 3-pin female
• Length: 10 m
• Diameter: 6 mm
• Wire cross-section: 2 x 0.22 mm²
• Colour: Black

• For kick drum and other bass-intensive sources
• Cardioid characteristic
• Frequency range: 20 - 16000 Hz
• Impedance: 500 ohms
• Sensitivity: -69 dBV / Pa
• 3-Pin XLR connector gold-plated
• Integrated tripod adapter for easy installation
• Weight: 0.74 kg
• Includes transport bag

• For lead and backing vocals
• Suitable for live and recording applications
• Dynamic hypercardioid capsule provides a clear and clean source recording with high gain before feedback
• Impedance: 150 Ω
• Frequency response 40 Hz - 19 kHz
• Maximum SPL: 144dB
• Length 176 mm
• Weight 307 g
• Incl. Softbag and microphone clip

• Frequency range: 50 Hz - 18 kHz
• Max. SPL: 145 dB
• Impedance: 600 Ohm
• -30 dB rear attenuation
• Wide and balanced frequency response with the typical HEIL pleasant sounding mids
• In combination with the high back and side attenuation an ideal allround microphone for stage and studio
• Very suitable for live vocals and snare drum
• Recommended applications: singing, speaking, snare drum, cymbals, piano, guitar and banjo
• Colour: Black

• Supercardioid
• Frequency range: 80 - 12,000 Hz
• Impedance: 500 Ohm
• On/Off switch
• Colour: Blue/black
• Weight: 250 g
• Clamp included
• Set of 6

Bundle offer comprising

• Dynamic Microphone

The MD 441 U is a microphone of an exceptional quality: its acoustic properties correspond to those of a condenser microphone. Transient response and low distortion are ensured even at extremely high sound pressure. Surface: all metal body with black imitation leather finish, sound inlet basket: nickel plated

• Very feedback resistant
• Super-cardioid
• Tunable HP and HF shelve, XLR
• Impedance: 200 Ohm
• Frequency range: 30 Hz - 20 kHz
• Size: 270 x 33 x 36 mm
• Weight: approx. 450 g
• Incl. clamp and storage box
• Suitable matching clamp: Article Nr 106538 (not included)

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

Bundle offer comprising

• Condenser instrument microphone
• Easy installation with various instrument holders for many different instruments (not included)
• Flexible gooseneck 120 mm for easy alignment on the instrument
• Detachable cable with screw contact
• 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)
• Polar pattern: Cardioid
• Frequency range: 30 - 20.000 Hz
• Sensitivity: -38 dB +/- 2 dB
• Max. SPL: 130 dB
• Signal-to-noise ratio: 71 dB
• Impedance 100 Ohm
• Distortion factor:
• Cable length approx. 2 m
• Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)
• Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm

• Microphone Mount
• Guitar clip for the Lucan System CC 200 RC
• Suitable for clamping onto guitars or similar instruments with a thickness between 73 and 120 mm

• Hardcase
• For the Lucan System CC 200 RC
• With space for all system components (microphone, phantom adapter, cable, 1x holder each GH, VH,CH, PH,MH,SH)
• Dimensions (L x W x H): 33 x 22 x 7 cm

• Microphone Mount
• Violin clip for the Lucan System CC 200 RC
• Suitable for clamping to violins or similar instruments with a thickness of 35 to 55 mm

• Microphone Holder
• Clarinet-clip for the Lucan System CC 200 RC
• For fixing on clarinets or similar instruments with a strong hook-and-loop tape up to a diameter of 65 mm

• Microphone Mount
• Piano clip for the Lucan System CC 200 RC
• Suitable for fixing on pianos or similar instruments with strong magnets

• Microphone Mount
• Multi-Clip for the Lucan System CC 200 RC
• Suitable for clipping onto cello, saxophone, trombone, cornet or similar instruments with a thickness up to 23 mm

• Microphone Mount
• Tripod clip for the Lucan System CC 200 RC
• Suitable for screwing onto all stands with a standard 5/8" thread

Bundle offer comprising

• Dynamic Podcast Microphone with XLR Output
• Cardioid characteristic
• Frequency range: 50 - 16,000 Hz
• XLR output impedance: 252 ohms at 1 kHz
• 5/8" Thread for stand mounting
• Weight: 0.55 kg
• Dimensions with bracket (H x L x D): 164 x 153.6 x 90.2 mm
• Includes adapter from 3/8" - 5/8" thread

• Table microphone arm with cable guide
• Cables up to 8 mm in diameter can be attached to the underside of the arms with a clip system
• Aluminium construction
• Locking centre joint
• 3/8" Rhreaded connection with 5/8" adapter
• Table clamp up to 56 mm or table feed-through up to 45 mm (20 mm hole)
• Length upper arm: 43 cm
• Length lower arm: 43 cm
• Colour: Black

• High Quality Microphone Cable
• Profile: 2 x 0.22 mm²
• With Neutrik XLR male/female connectors
• Colour: Black
• Length: 3 m
• Made in Germany

• For stage and studio operation
• Elastically mounted 3/4" true condenser capsule - externally polarized
• Cardioid
• Frequency range: 20 - 20,000 Hz
• Peak SPL: 140 dB
• Sensitivity: 12 mV
• Inherent noise: 16 dBA
• Operated with 48 V phantom power or 9V battery (not included)
• On/ off switch with battery status LED
• Address type: front
• Satined nickel-plated metal cast housing
• Robust windscreen
• Effective shielding RF interference
• For outdoor recording and stage use
• Ideal for recording choir, brass orchestra and other acoustic instruments
• Thanks to good structure-borne noise suppression it can also be used as moderation microphone
• Length: 20.6 cm
• Diameter: 3.2 cm
• Weight (without battery): 371 g
• Incl. foam windscreen WS 3, RM3 stand clamp and ZP1 transport case

• Polar pattern: supercardioid
• Frequency range: 50 - 16000 Hz
• Impedance: 200 Ohm
• Max. 140 dB SPL
• Grey housing
• Incl. microphone holder

• PG Alta series
• Dynamic microphone for speech and vocals
• Characteristics: Cardioid
• Frequency range: 50 / 16,000 Hz
• Impedance: 150 Ω
• Sensitivity at 1 kHz: -55 DBV / Pa (1.8 mV)
• With switch
• Weight: 294 g
• Colour: Black
• Incl. 4.5 m XLR cable, holder and pocket

Bundle offer comprising

• Dynamic Instrument Microphone
• "Evolution" series
• Especially suitable for electric guitar, snare drum, brass
• Characteristics: supercardioid
• 3-Position switch: hi boost, flat, hi cut
• Frequency range: 40 - 18,000 Hz
• Sensitivity: 2.2 mV/Pa @ 1 kHz
• Dimensions: 55 x 34 x 134 mm
• Weight: 140 g
• Incl. microphone holder MZQ 100 and pocket

• Professional microphone cable
• Length: 6 m
• Original Neutrik NC 3 FXX-BAG + NC 3 MXX-BAG XLR plug
• Cable type: CME 220 Black
• Includes hook and loop fastener
• Colour: Black

• With 3 switchable polar patterns (Cardioid, omnidirectional, figure-eight)
• Transformerless circuit
• +48 V phantom power required
• Frequency range: 20 Hz-20 kHz
• Sensitivity: 14/16 / 18mV / Pa (omnidirectional/cardioid/ figure-eight) (- 37 / -36 / -35 dB @ 1000Hz)
• Output impedance:
• Max SPL: 132 / 142dB SPL for 1% THD @ 1000Hz (0dB / -10dB pad, 0dB SPL = 0.00002Pa)
• Inherent noise: 14dB (A) (Cardioid)
• Windshield, shock mount and zip bag