Allround Microphones

• Ideally for film/ TV/ video
• Polar pattern: super cardioid
• XLR Connector
• Requires phantom power P48 (44 - 52 V)
• Frequency range: 20 - 20,000 Hz, @ 80 Hz 12 dB/octave,
• Max. SPL: 139 dB
• Output impedance: 50 Ohm
• Dimensions: 219 x 22 x 22 mm
• Weight: 105 g
• Incl. windshield and clamp

• With gold sputtered 1/2" diaphragm
• Cardioid
• Satin nickel finish
• Very low noise
• Full frequency response
• Active electronics: JFET impedance converter
• Frequency range: 20 Hz to 20 kHz
• Sensitivity: -38 db at 1v / Pa + -2 dB
• Maximum output: +13.9 dBu
• Dynamic range: >128 dB
• Signal to noise ratio: 78 dB
• Weight: Microphone 100g
• Phantom power required (18V - 48V)
• Including windshield, tripod adapter and case
• Including 10 years manufacturer warranty

Bundle offer comprising

• Dynamic microphone

Specially developed to always give the vocals enough room under loud stage conditions and position it cleanly out of the mix.

• Polar pattern: Cardioid
• Frequency range: 40 – 18,000 Hz
• Sensitivity: 2.8 mV/Pa at 1 kHz = -51 dB (0 dB = 1V/Pa)
• Impedance 350 Ohm
• Metal housing
• Shock-mounted capsule
• Highly consistent directivity
• Hum compensating coil
• Suitable for vocals and percussion
• Dimensions 47 x 181 mm
• Weight 330 g
• Incl. Clamp and bag

• Affordable Microphone Stand with Boom arm
• Second microphone can be mounted next to the locking screw of the boom arm
• 3/8" Threaded connector
• Cast metal base
• Foldable feet
• Max. Height with Boom arm: Approx. 210 cm
• Weight: 1.60 kg
• Colour: Black

• Microphone cable
• XLR 3-pin male - XLR 3-pin female
• Length: 6 m
• Diameter: 6 mm
• Wire cross-section: 2 x 0.22 mm²
• Colour: Black

• Specially designed for miking toms and other percussive instruments, such as the djembe, congas, bongos, etc.
• Frequency response: 30 - 20,000 Hz
• Sensitivity 8 mV / PA
• Directional characteristic: Cardioid
• Pad switch: 0 dB, -10 dB
• Impedance:
• Equivalent noise level: 14 dB (A)
• Max SPL (sound pressure level) (0.5% THD @ 1000 Hz): 135 dB (10 dB pad)
• Requires 48 V phantom power
• XLR connector
• Dimensions: 95 x 22 x 22 mm
• Weight: 90 g
• Includes a microphone holder

• Directional characteristic: Cardioid
• Frequency range: 25 Hz - 20 kHz
• Impedance:
• Impedance:
• Equivalent SPL:
• Max SPL for 0.5% THD @ 1000Hz: 125 dB
• Power supply: Phantom power 48V
• Port: 3-pin XLR
• Colour: Silver
• Incl. Microphone clamp

• Directional characteristic: Super-cardioid
• High directivity to the front
• 1/2" Condenser capsule
• Allows recordings in broadcast quality
• Frequency range: 40-20000 kHz
• Sensitivity: 20 mV
• Internal-noise: 14 dBA
• Peak SPL: 134 dB
• Lightweight and compact plastic housing
• Structure-borne noise suppression via integrated Rycote Lyre shock mount
• Camera can be mounted using an integrated standard hot shoe adapter
• 3/8" Thread for easy boom mounting
• 3.5 mm TRS jack (double mono) connecting cable
• Switchable pre-attenuation (-10 dB)
• Switchable level boost (+ 20dB) for quiet sound sources
• Switchable high-pass filter (80 Hz) to eliminate low-frequency noise
• Power supply with 9V battery (not included)
• On / off switch with battery status LED
• More than 70 operating hours when using quality battery
• Length: 150 mm
• Weight: 85 g without battery
• Incl. pre-fitted windscreen foam

• Supercardioid
• 70 - 20,000 Hz
• High-pass filter 80 Hz
• 156 dB max. SPL
• 600 Ohm
• Laminate Varimotion membrane
• Elastic suspension of capsule for reduced noise from holding
• Black housing
• Weight: 340 g
• Bag, clamp and spare windshield included

• Supercardioid
• Incl. clamp and bag
• Ideal e.g. for vocals and brass instruments