|
|
Bundle offer comprising Audio-Technica AT2020
- Condenser Microphone
- 16 mm diaphragm
- Cardioid characteristic
- Frequency range: 20 - 20000 Hz
- Signal-to-noise ratio: 74 dB, 1 kHz at 1 Pa
- Dynamic range: 124 dB (typical), 1 kHz max. SPL
- Sensitivity: 7 dB (14.1mV) re1V at 1Pa
- Impedance 100 Ohm
- Max. SPL: 144 dB (1kHz, 1% THD)
- Requires 48V phantom power
- Dimensions 162 x 52 mm
- Weight 345 g
- Incl. mount and pouch
the t.bone MS 180
- Mounting Popkiller
- With elastic arm
- Arm length: 20 cm
- Edge-Ring: Ø 15.5 cm
- Nylon-Cover: Ø 14 cm
pro snake TPM 6
- Professional microphone cable
- Length: 6 m
- Black Yongsheng XLR plug (made by Neutrik)
- Incl. hook and loop fastener
|
Price History: Audio-Technica AT 2020 Bundle
105.00 $ |
|
|
Large-diaphragm studio microphone
- Polar pattern: Cardioid
- Frequency response: 20 Hz - 20 kHz
- Sensitivity: 132 dB
- Maximum SPL: 134 dB
- Output impedance: 200 ohms
- Equivalent noise level: 16 dB
- Signal-to-noise ratio: 87 dB
- Power supply: 48 V phantom power
- Dimensions: 220 x Ø 65 mm
- Weight: 950 g
- Colour: Black
- Includes bracket, wind guard, pouch, and hard case
|
Price History: the t.bone SC 1200
106.00 $ |
|
|
Large diaphragm condenser microphone
- Cardioid characteristic
- Frequency range: 30 - 20.000 Hz
- Impedance: 200 Ohm
- S/N Ratio: 74 dB (Ref. 1Pa A-weighted)
- Equivalent Noise Level: 20dB (A weighted IEC 268-4)
- Max SPL for 0.5% THD: 130 dB
- 48 V phantom power (+- 4 V) required
- Dimensions (Ø x H): 47 x 184 mm
- Incl. microphone clamp and storage bag
|
106.00 $ |
|
|
Large-diaphragm condenser microphone
- Gold-plated 1" capsule
- Directional characteristic: cardioid
- Extremely low noise circuit design
- Requires +48 V of phantom power
- Frequency range: 20 - 20,000 Hz
- Sensitivity:-34 dB (+/- 2 dB) at 1 kHz (0 dB)
- Inherent noise: 4.5 dB(A) SPL
- Maximum sound pressure level (SPL): 138 dB at 1 kHz (<1% THD)
- Signal-to noise ratio: 88.5 dB SPL at 1 kHz (according to IEC651)
- Output impedance: 100 ohm (+/- 30% at 1 kHz)
- Connection: 3-pin XLR
- Dimensions: 189 x 54 mm
- Weight: 354 g
- Includes a shock mount with integrated pop shield and a 6 m XLR microphone cable
|
Price History: Behringer TM1 Complete Vocal Recording
107.00 $ |
|
|
Studio Microphone
- Dynamic
- Ideal for speech and vocals
- Integrated pop filter
- Polar pattern: Cardioid
- Frequency response: 40 - 18,000 Hz
- Sensitivity: 2.5 mV/Pa (-52 dBV)
- Dimensions: 158 x 86 x 62 mm
- Weight: 0.51 kg
|
Price History: SE Electronics DynaCaster DCM 3
107.00 $ |
|
|
Recording Microphone Set
- Consisting of MXL 990 large diaphragm condenser microphone and MXL 991 small diaphragm condenser microphone
MXL 990 features: - Frequency range: 30 Hz - 20 kHz
- Sound pressure level: 130 dB max. SPL
- Cardioid
- Requires 48V phantom power
- incl. microphone mount and transport case
MXL 991 Features: - Frequency range: 30Hz - 18kHz
- Sound pressure level: 137 dB max. SPL
- Cardioid
- Requires 48V phantom power
|
Price History: MXL 990/991 Set
111.00 $ |
|
|
Bundle offer comprising the t.bone SC 450 USB
- Large diaphragm studio microphone
- USB port for direct operation on the computer
- No additional drivers needed
- Phantom power via USB Port
- Characteristics: Wide Cardioid
- Frequency range: 20 - 18.000 Hz
- External Low Cut and -10 dB Pad Switch
- Compatible with Vista, XP, WIN 7 and 8, Windows 10, Mac OSX, Logic and Garageband (Mac OSX)
- Compatible with Apple iPad 1/2/3 (requires optional Camera Connection Kit, not included)
- Including case, shock mount and USB cable
the t.bone MicScreen Desktop
- Portable Desktop Absorber for Microphones
- Reduces the transmission of unwanted room influences such as reflections, ambient noise and echoes via the microphone
- Height adjustable for ideal positioning on the table
- Stable base-plate with rubber feet to decouple the tripod from the table top
- Tripod height adjustable from 230 to 330 mm
- Dimensions of the screen (L x D x H): 310 x 100 x 230 mm
- Weight: 3 kg
the t.bone MS 180
- Mounting Popkiller
- With elastic arm
- Arm length: 20 cm
- Edge-Ring: Ø 15.5 cm
- Nylon-Cover: Ø 14 cm
|
Price History: the t.bone SC 450 USB Desktop Bundle
115.00 $ |
|
|
Active Class-A studio microphone
- Polar pattern: Cardioid (side-fire)
- 38 mm (1.5") capsule with Ridyon technology
- Active plunger coil technology with extremely fast transient response and extended bass frequency range
- Internal 360-degree suspension system
- Includes microphone shock mount and pop filter
Note: requires 48 V phantom power.
|
Price History: Aston Microphones Element Bundle
116.00 $ |
|
|
Bundle offer comprising the t.bone MB 7 Beta
- Dynamic Broadcast Microphone
- Suitable for Broadcasts, Podcasts, Studio etc.
- Cardioid polar pattern reduces feedback
- Built-in pop filter and shockmount for reducing vibration noise
- Shielded against electromagnetic noise
- Frequency range: 20 to 20000 Hz
- Sensitivity: -57 DB +/- 3 DB
- Output impedance: 320 ohms
- XLR 3-pin connection
- 5/8" Thread
- Dimensions without bracket: diameter 50 mm X length 140 mm
- Dimensions with bracket (L x B x H): 200 x 90 x 50 mm
- Weight: 450 g
- Colour: Black
Thomann FetAmp
- Microphone Preamplifier
- Extremely low-noise Class A JFet amplifier
- For dynamic and ribbon microphones
- 2 Matched JFet transistor pairs
- Input: Balanced 3-pin XLR female
- Output: Balanced 3-pol. XLR male
- Input impedance: 20 kOhm
- Gain: 28 dB (@ 3 kOhm source impedance)
- Frequency response: 10 - 50,000 Hz (+/- 1 dB)
- Requires phantom power: 24 - 48 V.
- Dimensions (L x W): 77 x 22 mm
- Weight: 35 g
- Developed and produced in Germany
Note: Does not allow phantom power to pass through to the microphone
|
Price History: the t.bone MB 7 Beta FetAmp Bundle
120.00 $ |
|
|
|
Price History: the t.bone BC 500 Bundle
120.00 $ |
|
|
Large diaphragm studio microphone
- With a 1.07" double diaphragm, switchable polar pattern (omnidirectional, cardioid, eight) and high-pass filter, the SC1100 is suitable for all studio situations.
- Switchable polar pattern: Omni-directional, figure-eight and cardioid
- Low cut switch
- Frequency response: 20 - 20.000 Hz
- Sound pressure limit: 123 dB
- Sensitivity: 39.4 mV/Pa
- Output impedance: 200 Ohm
- Distortion:
- Equivalent noise level [dB(A)]: 8.2 (ball)/ 6.8 (super-cardioid)/ 6.7 (eight)
- Power supply via phantom power 48 V (±4 V)
- Weight 941 g
- Includes aluminum case and new shock-mount
|
Price History: the t.bone SC 1100
122.00 $ |
|
|
Bundle offer comprising the t.bone MB 20
- Dynamic broadcast microphone
- Hypercardioid polar pattern to minimise ambient noise
- Switchable low-cut and mid-range boost (6 kHz -10 kHz)
- Output: 3-pin XLR
- Sensitivity: -56 dB +/- 3 dB
- Frequency response: 20 Hz - 20 kHz
- Output impedance: 250 ohms
- Microphone dimensions (L x Ø): 172 x 53 mm
- Weight 700 g
- Colour: Black
- Includes shock mount, pouch, and wind guard
Thomann FetAmp
- Microphone Preamplifier
- Extremely low-noise Class A JFet amplifier
- For dynamic and ribbon microphones
- 2 Matched JFet transistor pairs
- Input: Balanced 3-pin XLR female
- Output: Balanced 3-pol. XLR male
- Input impedance: 20 kOhm
- Gain: 28 dB (@ 3 kOhm source impedance)
- Frequency response: 10 - 50,000 Hz (+/- 1 dB)
- Requires phantom power: 24 - 48 V.
- Dimensions (L x W): 77 x 22 mm
- Weight: 35 g
- Developed and produced in Germany
Note: Does not allow phantom power to pass through to the microphone
|
Price History: the t.bone MB 20 FetAmp Bundle
130.00 $ |
|
|
Bundle offer comprising the t.bone SC 1100
- Large diaphragm studio microphone
- With a 1.07" double diaphragm, switchable polar pattern (omnidirectional, cardioid, eight) and high-pass filter, the SC1100 is suitable for all studio situations.
- Switchable polar pattern: Omni-directional, figure-eight and cardioid
- Low cut switch
- Frequency response: 20 - 20.000 Hz
- Sound pressure limit: 123 dB
- Sensitivity: 39.4 mV/Pa
- Output impedance: 200 Ohm
- Distortion:
- Equivalent noise level [dB(A)]: 8.2 (ball)/ 6.8 (super-cardioid)/ 6.7 (eight)
- Power supply via phantom power 48 V (±4 V)
- Weight 941 g
- Includes aluminum case and new shock-mount
the t.bone MS 180
- Mounting Popkiller
- With elastic arm
- Arm length: 20 cm
- Edge-Ring: Ø 15.5 cm
- Nylon-Cover: Ø 14 cm
|
Price History: the t.bone SC 1100 + Popkiller
133.00 $ |
|
|
|
Price History: the t.bone SC 1200 Stand Bundle
134.00 $ |
|
|
Bundle offer comprising the t.bone SC 1100
- Large diaphragm studio microphone
- With a 1.07" double diaphragm, switchable polar pattern (omnidirectional, cardioid, eight) and high-pass filter, the SC1100 is suitable for all studio situations.
- Switchable polar pattern: Omni-directional, figure-eight and cardioid
- Low cut switch
- Frequency response: 20 - 20.000 Hz
- Sound pressure limit: 123 dB
- Sensitivity: 39.4 mV/Pa
- Output impedance: 200 Ohm
- Distortion:
- Equivalent noise level [dB(A)]: 8.2 (ball)/ 6.8 (super-cardioid)/ 6.7 (eight)
- Power supply via phantom power 48 V (±4 V)
- Weight 941 g
- Includes aluminum case and new shock-mount
Roadworx PF 1
- Pop Filter
- For screwing onto microphone shockmount
- With aluminum grid
- Height adjustable
- Clamp for vertical or horizontal mounting
- Clamping range up to 14 mm
- Dimensions of the filter (W x H): 88 x 93 mm
- Rod length: 17 cm
- Weight: 80 g
|
Price History: the t.bone SC 1100 Popfilter Bundle
134.00 $ |
|
|
USB Studio Large-Diaphragm Microphone
- High-resolution A/D converter up to 24 bit / 96 kHz
- Polar pattern: Cardioid
- Frequency response: 20 - 20000 Hz
- Soft-touch mute button in the housing
- Headphone jack with a volume control
- Integrated headphone amplifier with a high output power
- Mix control
- LED display with two switching states: USB power and audio mute
- Dimensions (L x W): 142 x 52 mm
- Weight: approx. 373 g
- Colour: Black
- Supported operating systems: Windows 8.1/10/11, macOS Catalina/Big Sur/Monterey
- Incl. thread adapter 3/8"-16 to 5/8"-27, table base and a USB cable (2.0 m, USB C to USB A, with adapter USB A to USB C)
|
Price History: Audio-Technica AT2020USB-X
138.00 $ |
|
|
Rode X XDM-100; USB-C speaker microphone; dynamic large-diaphragm capsule; optimized for streamer and gamer; polar pattern: cardioid; ultra-low noise Revolution high-gain preamp; integrated DSP chip with high-pass filter, noise gate, compressor and Aphex; digital conversion: 24bit / 48kHz; frequency response: 20Hz - 20kHz; headphone volume control with integrated mute switch; stereo headphone output with zero latency monitoring (3.5mm jack); digital output: USB-C; plug&play to Mac and PC; rugged metal housing; including foam pop shield, PSM-1 shockmount, 3m headphone extension cable (3.5mm jack), 3m USB-C to USB-C cable, perpetual license for UNIFY streaming/recording software (download); microphone dimensions (W x D x H): 62 x 52 x 213mm; weight: 700g
|
Price History: Rode X XDM-100
139.00 $ |
|
|
Large diaphragm condenser studio microphone
- 1” capsule with cardioid characteristic
- Transformerless circuit
- +48 V phantom power required
- Frequency range: 20-20000 Hz
- Sensitivity: -34 dB (0dB=1V/Pa)
- Output impedance:
- Max SPL 132 dB
- Inherent noise: 12dB(A)
- Incl. wind shield, shock mount and zipper bag
|
Price History: Studio Projects B1
143.00 $ |
|
|
SE Electronics DynaCaster DCM6; dynamic studio microphone; perfect for speech and vocals; polar pattern: cardioid; built-in preamp boosts level by 30 dB when needed (requires 48V phantom power); built-in pop filter; frequency response: 40 Hz - 18 kHz; Sensitivity without preamp: 2.5 mV/Pa (-52 dBV);Sensitivity with preamp: 79 mV/Pa ( -22 dBV); dimensions: 158 x 86 x 62 mm; weight: 0.52 kg
|
Price History: SE Electronics DynaCaster DCM6
148.00 $ |
|
|
Large diaphragm condenser microphone
- 1" condenser microphone
- Full metal housing
- Switchable characteristics (cardioid, omnidirectional, figure 8)
- Frequency range: 20 - 20000 Hz
- Switchable low cut at 300 Hz
- Switchable -20 dB Pad
- Maximum SPL: 135 / 155 dB
- Diameter: 53 mm
- Length: 165 mm
- Weight: 525 g
- Colour: Black
- Incl. shock mount and transport case
|
155.00 $ |