Large Diaphragm Microphones

• 1" condenser microphone
• Full metal housing
• Cardioid characteristic
• Frequency range: 20 - 20000 Hz
• Switchable low cut at 300 Hz
• Switchable -20 dB Pad
• Maximum SPL: 135 / 155 dB
• Diameter: 53 mm
• Length: 165 mm
• Weight: 525 g
• Colour: Black
• Incl. shock mount and transport case

Bundle offer comprising

• Large diaphragm condenser studio microphone
• 1” capsule with cardioid characteristic
• Transformerless circuit
• +48 V phantom power required
• Frequency range: 20-20000 Hz
• Sensitivity: -34 dB (0dB=1V/Pa)
• Output impedance:
• Max SPL 132 dB
• Inherent noise: 12dB(A)
• Incl. wind shield, shock mount and zipper bag

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• Microphone cable
• XLR 3-pin male - XLR 3-pin female
• Length: 6 m
• Diameter: 6 mm
• Wire cross-section: 2 x 0.22 mm²
• Colour: Black

• 1.07" Gold membrane
• Super warm sound
• Directional characteristic: Cardioid
• Frequency profile: 20 / 20,000 Hz
• Output Impedance: 200 Ohm
• Sensitivity: 36 +/- 2 dB (0 dB-1V/Pa 1000 Hz)
• Incl. transport case, windscreen, shock mount and external power supply
• Dimensions: 59 x 180 mm
• Suitable cable between microphone and power supply included

Bundle offer comprising

• Large-diaphragm studio microphone

• Polar pattern: Cardioid
• Frequency response: 20 Hz - 20 kHz
• Sensitivity: 132 dB
• Maximum SPL: 134 dB
• Output impedance: 200 ohms
• Equivalent noise level: 16 dB
• Signal-to-noise ratio: 87 dB
• Power supply: 48 V phantom power
• Dimensions: 220 x Ø 65 mm
• Weight: 950 g
• Colour: Black
• Includes bracket, wind guard, pouch, and hard case

• Mobile Absorber and Diffusor
• Reduces the absorption of undesirable noises such as room reflections and echoes
• Due to its design, Micscreen LE can be quickly set up in both the studio and for live applications
• Fits almost every standard microphone stand
• Adjustable height
• Thread mount: 5/8"
• Weight: approx. 3 kg
• Diameter/width: 460 mm
• Depth: 265 mm
• Height: 300 mm
• Wall thickness: 55 mm

• Microphone Stand with Boom Arm
• Cast base with foldable feet
• Metal tommy screw on the boom joint
• 3/8" Threads for microphone clamp
• Includes 3/8" to 5/8" thread adapter
• Height adjustable from 105 - 170 cm
• Adjustable arm: 75 cm
• Colour: Black

• Professional microphone cable
• Length: 6 m
• Black Yongsheng XLR plug (made by Neutrik)
• Incl. hook and loop fastener

• Including 18 microphone emulations and 10 Synergy Core analogue-modelled effects
• Powered by a built-in DSP and FPGA chips
• Capsule with a gold-coated 34 mm diaphragm
• Polar pattern: cardioid
• Power requirement: 5V / 500 mA
• Bus-powered via USB type-B
• Requires no microphone preamplifier or audio interface
• Latency-free monitoring (
• A/D conversion: 24 bit / 192 kHz
• Frequency response: 20 Hz - 20 kHz
• Inherent noise: 17 dBA
• Max. sound pressure level: 140 dB (
• 64 bit Acoustically Focused Clocking technology (AFC)
• Microphone gain and headphone volume controls
• Switch for -10 dB attenuation and high-pass filter
• 1 x Stereo headphone output (3.5mm jack)
• Compatible with popular DAWs
• Suitable for PC and Mac
• Dimensions (L x D): 188 x 56 mm
• Weight: 435 g
• Incl. table stand, shockmount and USB cable

Included Microphone Emulations:

• Berlin 47 FT
• Berlin 47 TU
• Berlin 49T
• Berlin 57
• Berlin 67
• Berlin 87
• Berlin K86
• Berlin M103
• Berlin M251
• Berlin V563
• Hamburg 441
• Illinois 7B
• Illinois 57
• Minnesota 20
• Tokyo 800T
• Vienna 12
• Vienna 112
• Vienna 414

Included Synergy Core Effects:

• VEQ-55A
• BAE-1073
• BAE-1073MP
• FET-A76
• OPTO 2A
• GYRAF GYRATEC IX
• MASTER DE-ESSER
• POWERGATE
• POWEREX
• AURAVERB

Bundle offer comprising

• Large-Diaphragm Tube Microphone

"Warm tube sound for digital recording!" - With the SCT 800 t.bone reacts to the cries of countless projects and also professional studios and provides a condenser microphone for an almost unbeatable price. It consists of a gold-steamed diaphragm and a reliable 12AX7 tube

With its noble "blue and gold" look and the supplied accessories (elastic suspension and deluxe case) the SCT800 offers an excellent price-performance ratio

• Reliable 12AX7 tube
• Colour: Blue / Gold
• Incl. Deluxe Case, shock mount, external power supply (the cable has a length of 5m)

Technical specifications:

• Frequency range: 20 - 15.000 Hz
• Sensitivity: 14 mV / Pa (@ 1kHz, 74 dB SPL)
• Polar Pattern: Cardioid
• Diversity >= 12 dB (300-3000 Hz)
• Diversity >= 15 dB (1000 Hz)
• Impedance: 200 Ohm
• Maximum sound pressure (k=0.5%) 125 dB
• Equivalent SPL:
• Max. SPL for 0.5% THD @ 1000Hz: 120 dB
• Supply voltage: via external power supply
• Connections: 3-pin XLR Male
• Height x largest diameter: 222 x 50.5 mm

• Pop Filter
• For screwing onto microphone shockmount
• With aluminum grid
• Height adjustable
• Clamp for vertical or horizontal mounting
• Clamping range up to 14 mm
• Dimensions of the filter (W x H): 88 x 93 mm
• Rod length: 17 cm
• Weight: 80 g

MXL CR77; Dynamic vocal microphone; For stage and as well for studio; Polar pattern: supercardioid; Frequency response: 50 Hz-14 kHz; Sensitivity: -52 dB re 1 V/Pa; Impedance: 400 ohms; Vintage design with modern elements; size: 65 x 180 mm; weight: 0.635 kg; incl. MXL flight case

Bundle offer comprising

• Large-Diaphragm Tube Microphone

"Warm tube sound for digital recording!" - With the SCT 800 t.bone reacts to the cries of countless projects and also professional studios and provides a condenser microphone for an almost unbeatable price. It consists of a gold-steamed diaphragm and a reliable 12AX7 tube

With its noble "blue and gold" look and the supplied accessories (elastic suspension and deluxe case) the SCT800 offers an excellent price-performance ratio

• Reliable 12AX7 tube
• Colour: Blue / Gold
• Incl. Deluxe Case, shock mount, external power supply (the cable has a length of 5m)

Technical specifications:

• Frequency range: 20 - 15.000 Hz
• Sensitivity: 14 mV / Pa (@ 1kHz, 74 dB SPL)
• Polar Pattern: Cardioid
• Diversity >= 12 dB (300-3000 Hz)
• Diversity >= 15 dB (1000 Hz)
• Impedance: 200 Ohm
• Maximum sound pressure (k=0.5%) 125 dB
• Equivalent SPL:
• Max. SPL for 0.5% THD @ 1000Hz: 120 dB
• Supply voltage: via external power supply
• Connections: 3-pin XLR Male
• Height x largest diameter: 222 x 50.5 mm

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• Retro bottle design housing and modern elastic suspension
• 35 mm Dual diaphragm
• Tube preamp
• Nine selectable polar patterns incl.: Omnidirectional, cardioid and figure-8
• Switchable high-pass filter
• Switchable 10 dB pad
• Frequency response: 20 Hz - 20,000 Hz
• Sensitivity: 3.6 mV / Pa @ 1000 Hz (cardioid)
• Impedance: 75 Ohm
• Equivalent noise level: 16.3 dB (A-weighted)
• SPL: 150dB
• Incl. power supply and 7-pin XLR connector cable (10 m), case, wooden microphone box , shock mount and cable

• Switchable polar pattern: Cardioid, omnidirectional, figure eight
• Frequency range: 20 - 20,000 Hz +/- 3dB
• Maximum SPL: 139 dB
• -10 dB Switch
• High-pass switch 80 Hz 6 dB / octave
• Dimensions: 51 x 187 mm
• Scope of delivery: Aluminium case with wooden box and spider

Note: Requires 48 V phantom power.

• Sontronics STC-20
• Elastic suspension
• Pop screen
• 5m XLR cable
• Includes a bag for the microphone

Technical data STC-20:

• Large diaphragm microphone
• Cardioid
• 1" Membrane
• Ideal for vocals and acoustic instruments
• High transparency
• Open, silky sound
• Frequency range: 20 Hz - 20 kHz
• Max. SPL 120 dB
• Impedance 200 Ohm
• Dimensions (HxWxD): 194 x 53 x 53 mm
• Weight: 696 g

• Polar pattern: Supercardioid
• 1" Nickel-plated diaphragm
• Frequency response: 20 - 18.000 Hz
• Sensitivity: -32 dBV (25mV) @ 1 Pa
• Limiting sound pressure level: 136 dB (with pad)
• Inherent noise: 9.5 dB (A)
• Impedance: 150 Ohm
• High-pass filter 100Hz (6 dB/oct)
• Requires 48 V phantom power
• Weight: 0.9 kg
• Incl. shock mount

• Polar pattern: Cardioid
• Frequency range: 20 - 20,000 Hz (+/- 3dB)
• Max.sound pressure level: 127 dB
• -10/0 dB pad switch
• Low-cut filter 80 Hz
• Requires 48 V phantom power
• Integrated pop filter
• Stand thread in the housing
• Integrated shock absorption of the microphone capsule
• Dimensions (L x W): 124.5 x 54 mm
• Weight: 0.439 kg
• Suitable optional shock mount: Art.431415 (not included)

MXL V87; large-diaphragm FET condenser microphone; ideal for acoustic guitars, pianos, voice and vocal recording; 32mm capsule; frequency response: 20Hz - 20kHz; polar pattern: cardioid; impedance: 200Ohm; signal-to-noise ratio: 85.5dB (A-weighted); max. SPL at 0.5% THD: 136dB; power requirements: 48V phantom power; nickel-plated metal housing; included in delivery: pop filter (PF-005-SS), shock mount (USM -002) and hard mount (V6-H); dimensions (L x D): 190 x 47mm; weight: approx. 500g

Bundle offer comprising

• USB Voice Microphone
• With a dynamic large-diaphragm capsule
• A/D-D/A Conversion is done in the microphone
• Adjustable headphone amplifier with 3.5 mm jack socket integrated
• Directional characteristics: Cardioid
• Maximum sound pressure: 115dB
• Frequency range: 40 Hz to 14 kHz
• Including: Mount for microphone stand, USB cable 3 m
• Optional accessories: Spider connector and swivel arm for table mounting (not included)

• Table microphone arm with cable guide
• Cables up to 8 mm in diameter can be attached to the underside of the arms with a clip system
• Aluminium construction
• Locking centre joint
• 3/8" Rhreaded connection with 5/8" adapter
• Table clamp up to 56 mm or table feed-through up to 45 mm (20 mm hole)
• Length upper arm: 43 cm
• Length lower arm: 43 cm
• Colour: Black

• 3 Switchable characteristics: Cardioid, omnidirectional, figure eight
• Frequency range: 20 - 20,000 Hz
• Switchable Low-Cut 80 Hz
• Switchable -10 dB pad
• Impedance: 120 Ω
• 149 DB SPL max.
• Weight: 412 g
• Incl. AT 8458 Tripod adapter and bag

The flagship of the t.bone large diaphragm microphone range. It features a 9-point polar pattern selector switch located on the external power supply, allowing the user to choose between standard omnidirectional, cardioid and figure-8 (bidirectional) characteristics with the respective intermediate stages. The resulting versatility allows for use in almost any recording application.

With its 24K gold-sputtered diaphragm (1.07"), the SCT2000 achieves excellent low-frequency response and high sensitivity. The microphone is equipped with a replaceable 12AX7B tube and has a very low self-noise compared to other microphones of its kind. Due to its warm sound and character, the SCT2000 with its vintage technology is a microphone of choice for engineers and solo artists.

• Very warm sound
• Replaceable 12AX7B tube
• Polar patterns: Omnidirectional, cardioid, figure-of-eight and 6 intermediate levels adjustable at the power supply, selectable via power supply module
• Incl. deluxe case, spider and mains supply

Technical Specifications:

• Frequency response: 20 - 20,000 Hz
• Sensitivity: 14 mV/Pa OR-38.5+/-2 dB (0 dB=1V/Pa 1000 Hz)
• Impedance: 200 Ohm
• Equivalent noise level: 16 dB (A weighted)
• Max. SPL for 0.5 % THD @1000 Hz: 130 dB
• Special power supply in external box
• Connectors: 7-pin XLR
• Size: max. diameter: 60 mm x 205 mm

• Polar pattern: Continuously variable pattern with a "hard" cardioid center detent
• Frequency range: 20 - 20,000 Hz
• Sensitivity: -36 dBV 16 mV / Pa
• Max. SPL: 143 dB (including pad)
• 20 dB pad
• 100 Hz hi-pass filter (6 dB / octave)
• Impedance: 200 ohms
• Transformerless balanced output circuits
• Large 1.1" gold-coated diaphragm
• Integrated stainless steel pop filter
• Dimensions: 57 x 178 x 57 mm
• Weight: 0.5kg