Condenser Microphones

• Polar pattern: cardioid
• Frequency response: 35 - 20,000 Hz
• Sensitivity: 10 mV/Pa
• Inherent noise: 19 dB SPL (A)
• Max. sound pressure level: 150 dB
• Low cut filter: 120 Hz (2nd order)
• Impedance: 275 O (balanced)
• Load resistance: > 1 kO
• Requires a 48 V phantom power
• Robust die-cast housing
• Dimensions: 194 x 53 x 53 mm
• Weight: 0.35 kg
• Incl. OCH1 Mic Clip and MSC1 Carry Case

• Characteristic: Supercardioid
• Frequency range: 20 - 20,000 Hz, ± 2 dB / 20 cm (7.9 ")
• Frequency range: 80 - 15,000 Hz with 2 dB soft boost at 10,000 - 12,000 Hz
• Second order high pass filter at 80 Hz with DAD4099
• Sensitivity: ± 3 dB at 1,000 Hz: 16 mV / Pa, -36 dB re 1 V / Pa
• Max. SPL: 135 dB
• MicroDot connector (XLR through supplied DAD4099 adapter)
• Total weight: 5.5 kg
• Foot weight: 4.1 kg
• Maximum total height: 253.3 cm
• Colour: Black

Bundle offer comprising

• Condenser Vocal Microphone
• Cardioid
• Frequency range: 20 - 20.000 Hz
• Impedance: 50 Ohm
• Maximum level: 132 dB SPL max.
• 48V Phantom power
• Colour: Black
• XLR connector
• Weight: 300 g
• Delivery incl. neoprene bag and microphone holder

• Professional microphone cable
• Length: 6 m
• Original Neutrik NC 3 FXX-BAG + NC 3 MXX-BAG XLR plug
• Cable type: CME 220 Black
• Includes hook and loop fastener
• Colour: Black

Earthworks Audio SR314-SB; Condenser Vocal Microphone; Polar Pattern: Cardioid; Frequency Response: 20 Hz - 30 kHz; Sensitivity: 10mV/Pa (-40dBV/Pa); Power Requirements: 24 - 48V Phantom, 10mA; max. Acoustic Input: 145dB SPL; Signal-to-Noise Ratio: 79dB A-weighted; Output: XLR; Output Impedance: 65 Ohms balanced; min. Output Load: 600 Ohms; Noise: 15dB SPL equivalent (A weighted); incl. MC4 Microphone Clip; Dimensions: 181,1 x 40,6 mm (Length x Diameter); Weight: 680g; colour: polished black with stainless mesh

• Directional characteristic: Cardioid
• Frequency response: 30 - 18,000 Hz
• Bass roll-off 80 Hz / 12 dB / octave
• Impedance: 150 Ohm
• SPL: 147 dB SPL max (157 dB SPL max with 10 dB pad)
• High-pass filter
• -10 dB Pad switch
• XLR connector
• Dimensions: 179 mm x 33-22 mm
• Weight: 300 g
• Bag and tripod adapter included

15-Year manufacturer's warranty if registered within 30 days at audio-technica.com

• Ideal for vocals and acoustic guitars
• Very clean sound
• Low cut switch
• Polar pattern: Cardioid
• Frequency range: 50 - 16000 Hz
• Impedance 200 Ohm
• Sensitivity: -48 dB, 4mV / Pa
• Maximum sound pressure level: (k = 1%): 136 dB
• Audio connector: 3-pin XLR connector
• Requires 9-52 V phantom power
• Without switch
• Incl. Mount and storage box for transport
• Weight: 240 g, light

• Super-cardioid polar pattern
• Frequency range: 40 - 16.500 Hz
• Impedance: 150 Ohm
• Sensitivity: 6.9 mV / Pa (ref 1 kHz)
• Switchable Low Cut at 150 Hz
• Switchable 10 dB pad
• 48 -52V Phantom power needed!
• For high SPL (140 dB max.)
• Stable housing
• Extremely low feedback

Bundle offer comprising

• High-end Condenser Vocal Microphone
• For live applications
• Dual diaphragm
• Supercardioid/cardioid switchable
• Frequency response: 50 - 20.000 Hz
• Sensitivity: -51 dBV/Pa / 2.81 mV/Pa
• Maximum SPL: 94 dB SPL - 152 dB max.
• Diecast metal housing
• Minimal handling noise
• Great feedback rejection
• Triple pop filter
• Colour: Anthracite
• Weight: 300 g
• Incl. Case

• One-hand microphone stand
• Very sturdy One-hand microphone stand with light round steel base Ø 275 mm
• Easily adjustable by one-hand mechanism
• "Elegance" Series
• Height: 1055 - 1735 mm
• Impact sound absorbing rubber profile
• Steel
• 3/8" Threaded connector
• Weight 3.0 kg
• Colour: Black
• Matching bag under Art. 263921
• Winner of the Red Dot Design Awards 2013

• Professional Microphone Cable
• XLR male > XLR female
• 2 x 0.38 mm² cable profile
• Double copper spiral shielding
• Neutrik NC3MX-SOM connectors
• Length: 10 metres
• Colour: Black

• Polar pattern: cardioid
• Frequency response: 20-20.000 Hz
• Bass roll-off 80 Hz/12 dB/Octave
• Impedance: 150 Ohm
• SPL: 147 dB SPL max (157 dB SPL max. with 10 dB pad)
• Highpass filter
• 10 dB pad switch
• XLR connector
• Dimensions: 179 mm x 33-22 mm
• Weight: 330 g

15-Year manufacturer's warranty if registered within 30 days at audio-technica.com

• With patented triangular Ehrlund capsule
• Integrated dirt filter and high impact resistance, ideal for touring and stage applications
• Processes all impedances without affecting the frequency response
• Directional characteristic: Cardioid
• Frequency range: 7 - 87,000 Hz
• Noise ratio: > 9 dBA
• Peak SPL: 135 dB
• 48 V Phantom power necessary
• 3-Pin XLR connector
• Aluminium housing
• Microphone mesh made of hardened stainless steel
• Handmade in Sweden

The KMS 105 is developed to optimally transmit the human voice making it the first choice for demanding live applications. Due to the low inherent noise, crosstalk behavior that is free of colouration and the supercardioid characteristics, KMS-105 is ideal for a solo singer on stage. Popping, wind and handling noise are largely avoided through an innovative filter. High acoustic resolution and linear frequency response ensure that KMS-105 provides the musician an optimum control over singing and speaking on stage at any time.

• Condenser microphone
• The Neumann sound for stage
• High transparency in speaking and singing
• Transformerless circuit
• Supercardioid characteristics reduces feedback
• Crosstalk performance free of colouration
• Weight: 350 g
• Length: 180 mm
• Colour: Black
• Incl. microphone clamp

• For stage applications
• Linear frequency response
• Excellent feedback resistance
• Polar pattern: Cardioid
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 5.6 mV/Pa
• Peak SPL: 150 dB
• Impedance: 200 Ohm
• Current consumption: 4 mA
• Requires 48 V phantom power
• Black metal housing
• Double bearing capsule suspension
• Dimensions: 185 x 51 mm
• Weight: 312 g
• SA61 microphone holder and bag included

The Beta 87C is a permanently polarised condensation microphone with a linear transmission range designed specifically for the needs of professional artists using in-ear monitoring systems such as Shure PSM®.

The uniform cardioid characteristics over the entire transmission range very effectively avoid unwanted background noises, which is particularly noticeable to the users of in-ear monitoring systems for irritation in the monitor mix. The result is sound transmission in studio quality.

• Linear transmission area with easy presence increase
• Uniform cardioid characteristics over the entire transmission range for isolation of the signal source and minimal off-axis sound colouration
• Bass reduction compensates for proximity effect
• Built-in, three-layer windscreen minimises poplaute and breathing noises
• Operation with phantom power
• Transmission range: 50 Hz - 20 kHz
• Noise Sensitivity: -54 dBV / Pa (2 mV)
• Maximum sound pressure (at 1 kHz, 1 k + load, 0.25% distortion factor): 139 dB SPL
• Noise (equivalent sound pressure): 22 dB (A)
• Power supply: 11 to 52V
• Power consumption: max. 1.2 mA
• Dimensions (L x Ø): 192 x 51 mm
• Weight: 207g
• Incl. Clamp and pocket

Bundle offer comprising

• Condenser vocal microphone

Because of its high precision and attention to detail as well as its natural vocal reproduction, the Beta 87 was already the first choice of artists and sound engineers around the world. This classic is now available in a new design under the name Beta 87 A. At the request of many users, Shure has thickened the shaft of this microphone for a more comfortable grip.

The Shure Beta 87 A is a high-quality, permanently polarized condenser microphone with supercardioid characteristics for vocal pickup, which is characterized by an exceptionally linear transmission range and high sound pressure resistance. It is used in professional sound reinforcement, in radio and in studio recordings and combines excellent sound quality with the robustness required for tour and outdoor productions.

The Beta 87 A has a bass roll-off that compensates for the proximity effect and prevents the dreaded boom during close-ups. The typical Shore presence raises the upper mid-range, while the supercardioid pattern ensures maximum isolation from other sound sources such as vocals or instruments and only allows minimal off-axis sound colouration.

One of the toughest, most reliable, and highest quality condenser vocal microphones in the world

• Supercardioid polar pattern
• Linear transmission range for precise, detailed and true to original song and speech transmission.
• Extremely precise supercardioid characteristic over the entire frequency range for the greatest possible feedback resistance with maximum amplification.
• Built-in, three-layer wind protection minimizes pop and breathing noises.
• Operation with phantom power
• Freuqnecy range: 50 Hz - 20 kHz
• Output impedance: 100 ohms
• Idle sensitivity: -54 dBV / Pa (2 mV)
• Maximum sound pressure level (at 1 kHz; 1 k + load; 0.25% distortion factor): 140.5 dB SPL
• Inherent self-noise (equivalent sound pressure): 23.5 dB (A)
• Power supply: 11 to 52 V.
• Current consumption: max. 1.2 mA
• Dimensions (L x Ø): 192 x 51 mm
• Weight: 207 g
• Includes microphone clip and storage bag

• Microphone Stand
• With impact noise dampening cast base
• Base diameter: 250 mm
• Height-adjustable tube construction
• Height: 87 - 157 cm
• Weight: 2.8 kg
• Colour: Black

• Professional Microphone Cable
• Length: 9 m
• Original Neutrik NC 3 FXX-BAG + NC 3 MXX-BAG XLR plugs
• Cable type: CME 220 Black
• Thomann hook & loop cable tie included
• Colour: Black

Because of its high precision and attention to detail as well as its natural vocal reproduction, the Beta 87 was already the first choice of artists and sound engineers around the world. This classic is now available in a new design under the name Beta 87 A. At the request of many users, Shure has thickened the shaft of this microphone for a more comfortable grip.

The Shure Beta 87 A is a high-quality, permanently polarized condenser microphone with supercardioid characteristics for vocal pickup, which is characterized by an exceptionally linear transmission range and high sound pressure resistance. It is used in professional sound reinforcement, in radio and in studio recordings and combines excellent sound quality with the robustness required for tour and outdoor productions.

The Beta 87 A has a bass roll-off that compensates for the proximity effect and prevents the dreaded boom during close-ups. The typical Shore presence raises the upper mid-range, while the supercardioid pattern ensures maximum isolation from other sound sources such as vocals or instruments and only allows minimal off-axis sound colouration.

One of the toughest, most reliable, and highest quality condenser vocal microphones in the world

• Supercardioid polar pattern
• Linear transmission range for precise, detailed and true to original song and speech transmission.
• Extremely precise supercardioid characteristic over the entire frequency range for the greatest possible feedback resistance with maximum amplification.
• Built-in, three-layer wind protection minimizes pop and breathing noises.
• Operation with phantom power
• Freuqnecy range: 50 Hz - 20 kHz
• Output impedance: 100 ohms
• Idle sensitivity: -54 dBV / Pa (2 mV)
• Maximum sound pressure level (at 1 kHz; 1 k + load; 0.25% distortion factor): 140.5 dB SPL
• Inherent self-noise (equivalent sound pressure): 23.5 dB (A)
• Power supply: 11 to 52 V.
• Current consumption: max. 1.2 mA
• Dimensions (L x Ø): 192 x 51 mm
• Weight: 207 g
• Includes microphone clip and storage bag

The KMS 105 has been developed for the optimal transmission of the human voice, making it the first choice for demanding live applications. With its low inherent noise, discoloration-free and crosstalk behavior of the cardioid/ super-cardioid the KMS-105 is ideal for a solo singer on stage! Pop, wind and handling noises are largely avoided through innovative filters. With its high acoustic resolution and linear frequency response, the KMS 105 provides the musician with optimal control of his voice and his language on stage at any time.

• Acoustical operating principle: Pressure gradient transducer
• Polar pattern: super-cardioid
• Frequency range: 20 Hz - 20 kHz
• Sensitivity @ 1 kHz and 1 kO: 4.5 mV/Pa
• Nominal impedance: 50 O
• Rated load impedance: 1000 O
• Equivalent noise level: CCIR 468-3: 28 dB
• Signal to noise ratio CCIR 468-3: 66 dB
• Maximum output voltage: +12 dBu
• Dynamic range of the amplifier DIN/ IEC 651: 132 dB
• Supply voltage: 48 V ± 4 V
• Power consumption: 3.5 mA
• Connection: XLR 3F
• Weight: approx. 300g
• Diameter: 48 mm
• Length: 180 mm
• Nickel plated body
• Colour: nickel
• Delivery incl. neoprene sleeve and microphone clamp

Bundle offer comprising

• Live Condenser Microphone
• Supercardioid characteristics
• Robust metal housing
• Low handling noise
• Good feedback rejection
• Frequency range: 35 - 20000 Hz
• Maximum SPL: 141 dB
• Required phantom power (24V - 48V)
• Impedance: 50 Ohm
• Mute switch
• Length: 187 x 47 x 47 mm
• Weight: 308 g
• Includes a 10 year manufacturer warranty

• Microphone Stand Set
• Consists of microphone stand and microphone cable
• 10 m Microphone cable with 3-pin XLR connectors
• High quality flexible cable
• Microphone stand with boom
• Plastic tripod base
• Maximum usable height of the stand including boom: 190 cm
• Adjustable height of centre column 75 - 130 cm
• Length of boom: 65 cm
• Diameter of stand: 64 cm
• Transport length of tripod: 74 cm
• Thread 3/8" with 5/8" adapter
• Weight of stand: 1.46 kg
• Includes clamp for cable routing