|
|
Behringer Truth 3.5; active studio monitors; 3.5" Woofer + 1" Tweeter; Frequency range: 70 Hz - 20 kHz (±3 dB); max. SPL: 98 dB @ 1 m; Class-D Amp, 2x 32 Watts; Acoustic tuning; Volume Knob and On/Off Switch on the front side; connectors: 2x Line-Input 6.3 mm Jack + RCA, AUX-Input 3.5 mm Mini Jack Stereo, Headphone Out 3.5 mm Minijack Stereo, spring clips for Speaker to Speaker connection; inkl. Power Cable
|
Price History: Behringer Truth 3.5
89.00 $ |
|
|
Active 2-Way Studio Nearfield Monitor
- 6.5" Woofer
- 1" Tweeter
- DSP-controlled electronics
- Room-adaptive calibration via Neumann's Automatic Monitor Alignment MA 1 (optional, not included in the delivery)
- Switch for a manual room correction
- Frequency response (±3 dB): 39 - 21,000 Hz
- Amplifier: 100 W / 145 W
- Electronic peak/thermo limiter protected circuit are separated for the tweeter and the woofer
- Bass reflex cabinet
- Integrated switching power supply 100-240V, 50/60 Hz
- Connections: 1x XLR line input
- S/PDIF coaxial
- 2 Ethernet connections: AES67 and Control Network
- Dimensions (H x W x D): 345 x 225 x 273 mm
- Weight: 8 kg
- Colour: White
|
Price History: Neumann KH 150 AES67 WH
1,629.00 $ |
|
|
Bundle offer comprising
- Reference for speakers and headphones with measurement microphone (box)
- Speaker and headphone calibration software and measurement microphone in a bundle
- Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones
- Enables a more precise evaluation of recordings and mixes
- Room analysis and automated calculation of the room size based on several measurements
- Audio calibration engine allows for accurate processing
- Save an unlimited number of calibration profiles for monitor speakers
- Comes with headphone calibration profiles for more than 280 supported models
- Target curve custom adjustments in real time
- Translation check simulates over 20 different devices and device types for accurate mix translation results
- 3 filter modes to choose from: Zero Latency, Mixed and Linear Phase allow to optimize filter quality and latency according to the monitoring situation
- Additional processing controls for Mono, Dry/Wet and Safe Headroom
- App only: MIDI mapping for various controls and user presets for predefined output device/channel pair combinations
- Measurement microphone with a pre-polarized electret-condenser capsule
- Frequency response: 20 - 20.000 Hz with calibration curve
- Omnidirectional polar pattern
- Sensitivity: 14 mV/Pa
- Self noise: 24 dB
- Signal to noise ratio: 70 dB
- Dynamic range: 106dB
- Maximum sound pressure level: 132 dB SPL
- Requires 48 V phantom power
- Connector: 3 pin XLR
- Microphone calibration file for 30° off-axis measurements in Sonarworks software native format to be used with SoundID Reference
- Microphone calibration file for 0° on-axis measurements in .txt format
2x Kali Audio LP-6 2nd Wave
- Active 6.5" Nearfield Monitor
- 3D Imaging waveguide technology for large, imaginary stereo stages
- Bass reflex system
- Boundary EQ to adjust the sound in different studio environments
- Power: 80 W (40 W / 40 W bi-amped)
- Speaker configuration: 6.5" woofer with reduced mass, 1" soft dome tweeter
- Frequency range: 39 - 25,000 Hz
- Crossover frequency: 1300 Hz
- Sound pressure level: 85 dB SPL continuous
- Inputs: XLR, 6.3 mm jack (balanced), Cinch
- Input sensitivity XLR / 6.3 mm jack: +
- 4 dBu
- Input sensitivity RCA: -10 dBV
- Dimensions: 359 x 222 x 260 mm
- Weight: 7.01 kg
- Housing colour: Black
|
Price History: Kali Audio LP-6 2nd Wave Sonarworks Bdl
611.00 $ |
|
|
Active Nearfield Monitor
- Woofer: 8 inch magnetically shielded polypropylene / ceramic membrane
- Tweeter: 1 inch silk dome
- Frequency range: 45 Hz - 30 kHz
- High frequency level: -6 dB / +6 dB variable at 10 kHz
- Low frequency level: -6 dB / +6 dB variable at 100 Hz
- Frequency separation: 3 kHz
- Low frequency - amplifier power: 80W
- High frequency - amplifier power: 30 W
- Signal to noise ratio HF/LF: >94 dB / 100 dB
- THD+N at rated power HF/LF: 0.04%/0.02%
- Inputs: XLR / jack - combo jack, RCA inputs, S/PDIF - inputs for digital signals
- Outputs: S/PDIF - jack for digital signal transmission
- Input selection: Analog or digital
- Channel selection: Left or Right (only at digital signal)
- Input impedance: 20 kOhm balanced, 10 kOhm unbalanced
- Input sensitivity: +4 dBu balanced, -10 dBV unbalanced
- Weight: 12.2 kg
- Dimensions: 308 x 272 x 390 mm
- Colour: Black
|
Price History: Monkey Banana Turbo 8 black
343.00 $ |
|
|
Active 2-Way Nearfield Monitor
- Right side
- Frequency range: 40 Hz - 22 kHz
- Woofer 200 Watt - Tweeter 100 Watt
- 124 dB RMS
- Dimensions (W x H x D): 290 x 454 x 388 mm
- Weight: 18.6 kg
|
Price History: Dynaudio BM15A Right
1,266.00 $ |
|
|
Bundle offer comprising 2x Tannoy Reveal 402
- Active Studio Nearfield Monitor
- Power: 50 Watt Bi-amping (25 W + 25 W)
- Equipped with: 4" Woofer and 0.75" tweeter
- Active crossover filter
- Adjustable EQ
- Frequency range: 56 - 43,000 Hz
- Peak SPL: 101 dB
- 3.5 mm TRS Stereo AUX input for smartphone or tablet
- Balanced line-input XLR
- Unbalanced 6.3 mm line-input
- Input: 96 Watt
- Bass reflex port
- Dimensions: 240 x 147 x 212 mm
- Weight: approx. 5.2 kg
- Price per unit
t.akustik Iso-Pad 5
- Isolation Pad
- For acoustic decoupling of studio monitors
- Each ISO-Pad consists of two components, which allows you to change the position of the monitor both horizontally and in 2 different angles (4° and 8°)
- Load capacity per pad: 12 kg
- Material: Foam
- Dimensions (W x H x D): 170 x 40 x 300 mm
- Colour: Anthracite
- Quantity: 1 Pair
|
Price History: Tannoy Reveal 402 IsoPad Bundle
207.00 $ |
|
|
Active 2-Way Nearfield Monitor
- 5" Woofer (45 W) + 1" Tweeter (25 W)
- 70 W biamp
- Bass reflex system
- Frequency range: 54 Hz - 30 kHz
- XLR input, balanced
- 6.3 mm jack input, balanced
- Adjustable input level
- Room control and high trim response control
- Dimensions (WxHxD): 170 x 285 x 222 mm
- Weight: 5.3 kg
- Price per item
|
Price History: Yamaha HS 5
159.00 $ |
|
|
2-Way Active Studio Monitor
- Lower frequency limit: 45 Hz (-3 dB)
- Max. SPL level (sound pressure level): 115 dB SPL (peak per pair with music material at 1 m distance)
- Speakers: 165 mm (6.5") woofer, 19 mm (3/4") metal dome tweeter with DCW
- Bass reflex housing made from aluminium
- Poweramp output: 90 W + 90 W
- Switchable equalisation to adapt to the room acoustics
- Active crossover and effective protection circuits
- Automatic on/off switch
- Magnetic shielding
- Dimensions (H x W x D): 350 x 237 x 223 mm
- Height with Iso-Pod: 365 mm
- Weight: 8.6 kg
- Quantity per pack: 1 Monitor
|
Price History: Genelec 8040 RAW
879.00 $ |
|
|
DJ Speakers with LED Lighting System
- One active and one passive speaker
- 3" Woofers
- Output power: 2x 15W
- Frequency range: 60 - 20000 Hz
- Double light control system with remote control
- Flame and spot effect (different modes, such as sound-to-light or strobe effect)
- Integrated power supply
- RCA audio input
- Housing made of 6 mm MDF
- Dimensions (H x L x W): 19.5 x 13.5 x 15.5 cm
- Weight: 1.425 kg (active / right) 1.250 kg (passive / left)
- Includes power cable, remote control and connection cable between the speakers
|
Price History: Hercules DJ Speaker 32 Party
86.00 $ |