Top 30+ Solid-State Bass Combos 2021

We have created for you a rating of the Best 30 Solid-State Bass Combos

Equipment list navigation:

1. Peavey Max 208
2. Markbass Mini CMD 151P LM3
3. Eich Amplification BC112Pro Bass Combo
4. Markbass Ninja 102-500 Combo
5. Peavey Max 150
6. Markbass CMD 151P Jeff Berlin
7. Markbass Marcus Miller CMD 102/250
8. Eich Amplification BC212 Bass Combo
9. Ashdown Studio 15
10. Markbass CMD JB Players School Combo
11. Markbass Mini CMD 121P
12. Markbass CMD 102P
13. Ashdown Studio 10
14. Hartke HD508
15. Peavey Max 250
16. Genzler Magellan MG350 Combo
17. Harley Benton SolidBass 300C
18. Peavey Max 300
19. GR Bass CUBE 800
20. Hartke HD50
21. Orange Crush Bass 50
22. Hartke Kickback 12
23. Ampeg BA-210 V2
24. Fender Rumble 200
25. Gallien Krueger MB110
26. Gallien Krueger MB108
27. Fender Rumble 100
28. Fender Rumble 500
29. Ampeg BA-108 V2
30. Fender Rumble 25

1. Peavey Max 208

Combo for electric bass

• Power output: 200 W
• Equipment: 2x 8″ Loudspeaker
• Angled baffle
• Pre-gain control with Transtube gain boost
• 3-Band EQ
• Switches: Overdrive, Contour, Mid-Shift Control, Bright Boost and Kosmos-C enhancer
• Aux in
• Headphone output
• FX loop
• Symmetrical DI-out
• Overdrive and mute foot-switchable (foot-switch not included)
• Dimensions (H x W x D): 33.5 x 31.2 x 58.9 cm
• Weight: Approximately 14.5 kg

---

2. Markbass Mini CMD 151P LM3

Bass Combo

• Power: 500 Watts RMS at 4 Ohms/300 Watts RMS at 8 Ohms
• Loudspeaker is equipped with: 1x 15” Neodymium loudspeaker custom made by B&C + tweeter
• Frequency range: 40 Hz – 18 kHz
• Bi-band limiter
• Control for volume, bass, low and high mid, treble and master volume
• Variable pre-shape filter
• Vintage loudspeaker emulator
• Line output
• Effect send and return
• Bass reflex on the back
• Ultra light and compact
• Weight approx. 18.5 kg
• Dimensions (WxHxD) approx. 46.5 x 46.5 x 48 cm

---

3. Eich Amplification BC112Pro Bass Combo

Transistor Bass Combo

• Power: 500 W to 4 ohms
• Amplifier: Class D
• Speaker assembly: 1x 12″ Calibration TE12D (8 ohm) ceramic speaker and CT1 4″ diaphragm mid-range tweeter
• Frequency range: 40 – 19000 Hz
• Neutrik Combo Speakon external speaker connection
• Active 4-band tone control
• “Button” knob
• Tuner output
• Mute switch
• Transformer-symmetrical DI (pre- and post-switchable) with ground lift switch
• Serial effect way
• Line Out
• Line In
• 3.5mm Aux-In
• 3.5mm headphone jack
• 115/230 V / AC switchable
• Internal loudspeaker can be switched off
• Monitor function by attachable stainless steel support
• Dimensions (W x H x D): 44 x 45 x 35 cm
• Weight: 14.1 kg
• Made in Germany

---

4. Markbass Ninja 102-500 Combo

Combo amplifier for electric bass

• Signature model
• Power: 500 W @ 4 ohms, 300 W @ 8 ohms
• Loudspeaker: Markbass Custom Made
• Speaker assembly: 2 x 10 “Neodymium and Tweeter
• Rear bass reflex opening
• Frequency range: 40 – 18,000 Hz
• Gain, bass, high and low center, treble and master volume controls
• VPF: Variable Pre Shape Filter (380 Hz)
• VLE: Vintage Speaker Emulator (250 – 20,000 Hz)
• Line output (XLR)
• Tuner output
• Connection for effects (send and return)
• Weight only about 16.4 kg
• Dimensions (W x H x D): approx. 33 x 69.6 x 43.3 cm

---

5. Peavey Max 150

Combo for electric bass

• Power: 150 W RMS
• Equipment: 12″ Loudspeaker
• Angled baffle
• Pre-gain control with Transtube gain boost
• 3-Band EQ
• Switches: Overdrive, Contour, Mid-Shift Control, Bright Boost and Kosmos-C Enhancer
• Chromatic tuner
• Aux In
• Headphone output
• FX loop
• Output for external loudspeaker
• Symmetrical DI-Out
• Overdrive and mute foot-switchable (foot-switch not included)
• Dimensions (H x W x D): 36.1 x 41.9 x 59.2 cm
• Weight: Approximately 13.3 kg

---

6. Markbass CMD 151P Jeff Berlin

Bass Combo

• Power: 500 W RMS at 4 Ohms/300 W RMS at 8 Ohms
• Equipped with: 1x 15″ Neodymium Custom Markbass Speaker
• 4-Band equalizer
• Frequency range: 40 – 5,000 Hz
• Controls for Volume, Bass, Low and High Mid, Treble, Master Volume
• Variable Pre Shape Filter
• Vintage Speaker Emulator
• Line Out
• Effects send and return
• Bass reflex on the back side
• Ultra lightweight and compact
• Weight: Approx. 21,2 kg
• Dimensions (W x H x D) approx. 46.5 x 55 x 48 cm

---

7. Markbass Marcus Miller CMD 102/250

Electric Bass Combo Amplifier

• Marcus Miller signature model
• Amplifier power: 250W @ 4 Ohm, 150W @ 8 Ohm
• Equipped with: 2x 10″ Neodymium Custom (Markbass) Speaker
• Global controls for gain and master volume
• EQ1: Ultra bass, bass, high and low mid and treble controls
• EQ2: Millerizer: 5-12 kHz band pass filter level 0/+ 10 dB (Modern Style Sound)
• Old school: Variable Low Pass from 20 kHz to 200 Hz (Vintage Style Sound)
• Stereo footswitch connection: EQ1 and EQ2 on / off (footswitch not included)
• Line out adjustable with balanced XLR output
• Mute to Tune switch with jack tuner output
• FX LOOP connection: Jack send / return for effects
• Switch for Line Out Pre/Post EQ
• Speaker output: Speaker twist / jack combo socket
• Dimensions (W x H x D): approx. 59.4 x 41.8 x 48 cm
• Weight: approx. 16.7 kg

---

8. Eich Amplification BC212 Bass Combo

Transistor Bass Combo

• Power: 500W at 4Ω
• Class D amplifier
• Loudspeakers: 2x 12″ Eich TE12D (8 Ohm) ceramic speaker and 1x 4″ CT1 tweeter diaphragm
• Frequency range: 40 – 19,000 Hz
• Speaker Twist connector for external loudspeaker
• Active 4-Band EQ
• “Taste” controller
• Tuner output
• Mute switch
• Transformer balanced DI (pre/post switch) with ground lift switch
• Serial effects loop
• Line out
• Line in
• 3.5mm Aux-In
• 3.5 Mm headphone connector
• 115/230 V/AC switchable
• Internal speaker switchable
• 2 Sided “all access” handles
• Strap handle on top
• 2 Transport castors
• Dimensions (W x H x D): 44 x 75 x 41 cm
• Weight: 23.5 kg
• Made in Germany

---

9. Ashdown Studio 15

Combo amplifier for electric bass

• Power output: 300 W
• Equipment: 1x 15″ Ashdown loudspeaker
• Tube emulation
• 5-Band EQ
• Shape switch
• DI Out (XLR)
• Overdrive controller
• FX loop
• Active and passive input
• Headphone output
• Line input
• Foot-switch connection (Drive)
• Dimensions (W x D x H): 42.8 x 37.8 x 42.6 cm
• Weight: 11.2 kg

---

10. Markbass CMD JB Players School Combo

Bass Combo Amp

• Characteristic sound of the analogue Markbass power amplifier
• Power: 250 Watt at 4 Ohm / 150 Watt at 8 Ohm
• 4-Band EQ
• VPF & VLE filters
• Line out adjustable with pre / post
• EQ switch
• Ground / Lift switch
• 15″ Speaker
• Weight: 15.7 kg

---

11. Markbass Mini CMD 121P

Bass Combo

• Power: 300 Watt at 8 ohm, 500 Watt at 4 ohm
• Loudspeaker: 1 x 12″ Neodymium and tweeter
• Frequency range: 45 – 18,000 Hz
• Bi-band limiter
• Control for volume, bass, high and low mid, treble and master volume
• Variable pre-shape filter
• Vintage loudspeaker emulator
• Line output
• Connector for effects (Send and Return)
• Bass reflex on the rear
• Very light and compact
• Weight approx. 11.9 kg
• Dimensions (W x H x D): Approx. 38 x 42.5 x 36 cm
• Optional protective cover 241660 (not included)

---

12. Markbass CMD 102P

Bass Combo

• 500 W at 4 ohm / 300 W at 8 ohm
• 2x 10″ Neodymium loudspeaker
• Custom made by B&C + tweeter, 40 Hz – 18 kHz
• Controls for volume, bass, low and high mid, treble, master volume
• Variable pre-shape filter
• Vintage loudspeaker emulator
• Line output
• Effect send and return
• Monitor housing (wedge) with 2 positioning angles
• Bass reflex on the front side
• Ultra light and compact
• Weight approx. 20 kg
• Dimensions (W x H x D) approx.: 595 x 480 x 475 mm

---

13. Ashdown Studio 10

Electric Bass Combo

• Power: 50 W
• Equipped with: 1x 10″ Ashdown Speaker
• Tube emulation
• Active and passive input
• 5-Band EQ
• Shape switch
• Overdrive control
• Headphone output
• Line in
• Dimensions (W x D x H): 36.0 x 30.2 x 36.6 cm
• Weight: 7 kg

---

14. Hartke HD508

Bass Combo

• Power: 500 W
• Speaker configuration: 4x 8″ Paper/Neodymium aluminium
• Class D power amp
• 3-Band EQ
• Shape- and volume controls
• 6.3 mm Headphone output
• XLR DI output
• FX Loop
• Dimensions: 551 x 508 x 305 mm
• Weight: 22 kg

---

15. Peavey Max 250

Combo for electric bass

• Power: 250 W RMS
• Equipment: 15″ Loudspeaker
• Angled baffle
• Pre-gain control with Transtube gain boost
• 3-Band EQ
• Switches: Overdrive, Contour, Mid-Shift Control, Bright Boost and Kosmos-C enhancer
• Chromatic tuner
• Aux In
• Headphone output
• FX loop
• Output for external loudspeaker
• Symmetrical DI-Out
• Overdrive and mute foot-switchable (foot-switch not included)
• Dimensions (H x W x D): 41.1 x 49.3 x 57.9 cm
• Weight: Approximately 20.1 kg

---

16. Genzler Magellan MG350 Combo

Amplifier and Cabinet for Electric Bass

Amp: Magellan 350

• 1 Channel
• Power: 350 Watt at 4 Ohm, 175 Watt at 8 Ohm, or 350 Watt at 2.67 Ohm
• Class D power amplifier
• The power adapter works at 100 to 240 V
• Instrument input with mute function
• Active 3-band equaliser with parametric mids
• Contour Control with 2 variable Pre-Shape contour curves
• XLR Direct Out with Mic / Line Switch
• Pre / Post EQ Switch
• Ground lift
• AUX input
• Headphone output
• Dual Speaker Twist speaker outputs
• Impedance selector switch (8 / 4 / 2.67 ohms)
• Dimensions (W x D x H): 228.6 x 249.8 x 67 mm
• Weight: 1.75 kg

Cabinet: BA10-2

• Equipped with: 1x 10″ Eminence Neodymium Speaker + 4x 2.5″ Neodymium Mid / High Driver
• Power rating: 250 Watt @ 8 Ohm
• Frequency range: 55 – 20,000 Hz
• Sensitivity (1 W / 1 m): 96 dB
• Output frequency: 1600 Hz
• 2 x Speaker Twist NL-2 / 6.3 mm jack Combi connection sockets
• “Tilt Up” shape
• Robust “Edge-Lift” handle
• Dimensions (W x D x H): 390 x 380 x 330 mm
• Weight: 9.5 kg
• Speaker cable included

---

17. Harley Benton SolidBass 300C

Combo for Electric Bass

• Power: 300 Watt @ 4 Ohm
• Solid state amplifier
• Equipped with: 1x 15″ Custom Voiced Bass woofer, 1x 3″ Custom Voiced Tweeter
• Tilt back / Wedge housing
• 4-Band equaliser
• Input (gain) control with clip LED & mute function
• Master volume knob
• Smart compressor with on/off switch
• DI balanced output (XLR) with Pre/Post
• Lift/GND switch
• 2 Different instrument inputs for active/passive bass
• Integrated chromatic tuner with easy-to-read LED display & mute function
• Line input with level control for practising silently
• Headphone output
• FX loop (Send/Return)
• 2 Speakon speaker outputs (4 Ohm minimum)
• Dimensions: 450 x 635 x 425 mm
• Weight: 29.85 kg

---

18. Peavey Max 300

Combo for electric bass

• Power: 300 W RMS
• Equipment: 2x 10″ Loudspeaker
• Angled baffle
• Pre-gain control with Transtube gain boost
• 3-Band EQ
• Switches: Overdrive, Contour, Mid-Shift Control, Bright Boost and Kosmos-C enhancer
• Chromatic tuner
• Aux in
• Headphone output
• FX loop
• Output for external loudspeaker
• Symmetrical DI-Out
• Overdrive and mute foot-switchable (foot-switch not included)
• Dimensions (H x W x D): 41.1 x 49.3 x 57.9 cm
• Weight: Approximately 21.1 kg

---

19. GR Bass CUBE 800

Transistor Combo for Electric Bass

• Channel: 1
• Power: 800 watts
• Equipped with: 12″ custom design Jensen neodymium woofer speakers and 1″ tweeter
• Frequency range: 20 – 20,000 Hz
• Controls: Gain, Low, Mid Low, Mid High, High, Volume Line Out, Headphones Volume, Master Volume
• 3 Selectable frequencies for Mid Low: 185, 375, 800 Hz
• 3 Selectable frequencies for mid high: 600, 1200, 1800 Hz
• Deep Boost and Bright Boost switches
• Pure Sound Switch (EQ Bypass)
• Switchable LED / Fan Mode
• Mute switch
• Ground lift, DI pre / post, power switch on the back
• Effects loop: serial
• Connections: Send, Return, XLR DI out, Input (6.3 mm jack), Aux In, Headphones out
• Dimensions (W x D x H): 400 x 350 x 430 mm
• Weight: 14 kg
• Colour: Black
• Made in Italy

---

20. Hartke HD50

Bass combo

• Power: 50 Watts
• Components: 10″ hybrid speakers
• Controls for volume, bass, mid and treble
• AUX input
• Headphone output

---

21. Orange Crush Bass 50

Bass Combo

• Power: 50 W
• Components: 1x 12″ Speaker
• Controls: Volume, Treble, Middle, (Mid) Freq., Bass, Blend, Gain
• FX Loop
• Built-in tuner
• Analog signal path
• Bass reflex port
• AUX input
• Headphone jack with Cabsim circuitry
• Foot-switchable blend function (foot switch not included – available under Article Nr 170368)
• Dimensions (H x W x D): 485 x 430 x 275 mm
• Weight: 14.45 kg

---

22. Hartke Kickback 12

Bass Combo

• Power: 500 W
• Class D amplifier
• Components: 1x 12″ HyDrive neodymium speaker
• Shape EQ contour control
• 3-band EQ
• XLR DI Out
• 1x 6.3mm passive / active bass input
• 1x 6.3mm headphone output
• Steel grille in front
• Handle
• Weight: 14 kg

---

23. Ampeg BA-210 V2

Electric bass combo

• Power: 450 W at 4 ohm
• Equipped with 2x 10″ Ampeg Custom10 speaker and switchable 1″ HF tweeter
• Ampeg Ultra Hi/Lo switch
• Preamp with 3-band EQ
• Bass Scrambler overdrive
• XLR symmetrical line out
• FX Loop
• Loudspeaker output
• -15 dB Input pad
• Aux input
• Headphone output
• Weight: 21.8 kg
• Dimensions (W x H x D): 630 x 508 x 381 mm

---

24. Fender Rumble 200

Bass Combo Amplifier

• Amplifier: Class D
• Power: 200 W at 4 Ohm (with additional speaker), 140 W at 8 ohm (built-in speaker)
• Equipped with 15″ Eminence ceramic magnet speaker with 8 Ohm impedance and compression tweeter with on/off switch
• 1 x Channel with switchable bright switch
• Contour, vintage switch and overdrive
• Control for gain, bright on/off, contour on/off, vintage on/off, drive, overdrive on/off, level , bass, low mid, high mid and treble
• 6.3 mm jack input
• Headphone connector
• Mini jack stereo AUX input
• Line out XLR with Ground Lift
• Effects loop send and return
• External speaker output 8 ohm minimum
• Ivory soft touch radio potentiometer knobs
• Dimensions (H x W x D): 58.42 x 48.26 x 35.56 cm
• Weight: 15.65 kg
• Design: Black vinyl covering with silver grill cloth

---

25. Gallien Krueger MB110

Bass Combo

• Digital power amp
• Power: 100 W
• Equipped with: 1x 10″ Speaker
• 4-Band active EQ
• Contour switch
• Active/Passive input
• Chain output for MB series
• Headphone output
• AUX input
• Weight: approx. 9.53 kg
• Dimensions (H x W x D): 292 x 394 x 318 mm
• Made in USA

---

26. Gallien Krueger MB108

Bass Combo

• Digital power amp
• Power: 25 W
• 1 Paragon ceramic 8″ speaker
• 3-Band EQ
• Headphone output
• AUX input
• Dimensions (W x H x D): 368 x 318 x 318 mm
• Weight: 8 kg
• Made in USA

---

27. Fender Rumble 100

Bass Combo

• Class D
• Power: 100 W
• 1x 12″ Eminence Special Design speaker
• 1x Jack input
• 1x Channel with switchable bright switch
• Contour, vintage switch and overdrive
• Controls: Gain, bright on/off, contour on/off, vintage on/off, drive, overdrive on/off, level, bass, low mid, high mid and treble
• Headphone connector
• Mini jack stereo AUX input
• Line out XLR with Ground Lift
• Effects loop send and return
• Soft touch radio potentiometer knobs
• Dimensions (HxWxD): 46.99 x 41.91 x 35.56 cm
• Weight: 9.97 kg
• Design: Black vinyl covering with silver front grill

---

28. Fender Rumble 500

Bass Combo Amplifier

• Class D
• Power: 500 W
• Loudspeaker: 2 x 10″ Eminence ceramic magnet speaker with 16 ohm
• Compression tweeter with on/off switch
• 1 x Channel with switchable bright switch
• Contour, vintage switch and overdrive
• Controls: Gain, bright on/off, contour on/off, vintage on/off, drive, overdrive on/off, level, bass, low mid, high mid and treble
• 6.3 mm jack input
• Headphone connector
• Mini jack stereo AUX input
• Line out XLR with Ground Lift
• Effects loop send and return
• External speaker output minimum 8 Ohm
• Ivory soft touch radio potentiometer knobs
• Dimensions (H x W x D): 58.4 x 48.2 x 35.5 cm
• Weight: 16.56 kg
• Design: Black vinyl cover with silver front grille

---

29. Ampeg BA-108 V2

Electric bass combo

• Power: 20 W at 4 ohm
• Equipped with 8″ Ampeg Custom8 Speaker
• Preamp with 3-band EQ
• -15 dB Input pad
• AUX input
• Headphone output
• Weight: 12.7 kg
• Dimensions (H x W x D): 427 x 381 x 305 mm

---

30. Fender Rumble 25

Bass Combo Amplifier

• Solid State
• Power: 25 W
• Equipped with 1x 8″ Fender Special Design loudspeaker
• 1 x Channel with switchable overdrive and contour
• Controls for volume, overdrive on/off, bass, contour on/off, mid and treble
• 6.3 mm jack input
• Headphone connector
• Mini jack stereo AUX input
• Soft touch radio potentiometer knobs
• Dimensions (H x W x D): 38.8 x 38.8 x 27.9 cm
• Weight: 9.53 kg
• Design: Black vinyl covering with silver grill cloth

---

Write your review and rate this rating The Best 30 Solid-State Bass Combos