Erica Synths

• Fully analogue construction
• Plug-in connections can be stored via plug-in voice cards (5 x preset cards and 5 x DIY cards included)
• Dimensions (W x D x H): 240 x 140 x 80 mm
• Weight: 950 g
• Includes: 20 patch cables, 1 stackable patch cable, external power supply (12 V DC) and manual

Includes:

• Step sequencer
• 2 x VCO
• 2 x Mixer
• LFO
• Sample & Hold
• Noise & Random generator
• 2 x Function generator
• 2 x Lowpass Gate
• BBD delay & output section

• Analogue multi-modulation source
• 2 Looped function generators with controls for attack, on, decay and off
• Trigger button for manual triggering
• Per function generator: decay CV input, gate input, bi-polar and uni-polar output
• Integrated VCA
• Noise generator (white noise)
• Sample & hold section
• Current consumption: 125 mA (+12 V) / 74 mA (-12 V)
• Width: 22 HP
• Depth: 36 mm

• 2 Identical overdrive circuits in one module
• Gain and Drive controls
• Gain and Drive are CV controllable
• Three different overdrive tones selectable
• Power requirement: 58 mA (+12 V) / 58 mA (-12 V)
• Width: 10 TE
• Depth: 50 mm

• Controls for Tone, Decay and Tone CV
• Manual triggers
• Connections: Trigger, Accent, Tone CV and Audio Output 3.5mm mini jack
• Decay range: 120 - 1100 ms
• Audio Output Level: -5V to +5V
• CV level: -5 V to +5 V
• Trigger Level: 5V
• Trigger time: 1 ms
• Accent CV Level: 10 V
• Power requirement: 24 mA at +12 V, 20 mA at -12 V
• Dimensions (W x D): 10 HP / HP x 35 mm

• Expands Black Low-Pass Filter and Black High-Pass Filter by a separate bandpass/notch filter
• Controls for filter frequency and bandwidth
• Mode switch (bandpass / notch filter)
• CV inputs for filter frequency and bandwidth
• Current consumption: 25 mA (+12 V) / 21 mA (-12 V)
• Width: 8 HP
• Depth: 35 mm

Note: For operation, the Black Low-Pass Filter (Art.518165) and the Black High-Pass Filter (Art.518166) are required (not included in delivery).

• 6 Instruments: 3x drum voice (suitable for kicks, toms, cowbell, percussions), snare voice, cymbal/clap, hihat voice
• Each voice consists of oscillator, transient generator, filter, amplifier, envelope, LFO, distortion and sample rate reducer
• Wide control ranges of the parameters allow a flexible sound design
• Step sequencer with up to 64 steps per track
• Song mode
• Memory for 64 drum kits
• Recording of parameter changes
• Master effects: Drive, ring modulator, compressor, delay
• Micro SD card slot
• 4 Audio outputs: 6.3 mm jack
• Stereo headphone output: 3.5 mm jack
• MIDI in/out
• USB-B port
• Clock input/output and reset input: 3.5 mm jack)
• Dimensions (W x D x H): 230 x 145 x 70 mm
• Weight: 810 g
• Incl. external power supply (12V DC)

• Analog CV and audio processor for a wide range of tasks
• Contains two separate 3-channel Unity Gain mixers
• Two attenuators / boosters and two bipolar offset controls
• Different operating modes configurable by Jumer
• 2 x 3 Inputs for mixer A & B
• Outputs for Mix A & B
• Outputs for Scale A & B
• Outputs for minimum / maximum values of both mixers
• Current consumption: 42 mA (+12 V) / 38 mA (-12 V)
• Width: 10 TE
• Depth: 35 mm

• Lowpass gate with resonance
• Usable as VCF, VCA or a combination of both
• Controls for offset (filter frequency and/or VCA offset) resonance, decay and offset CV
• Switchable resonance overdrive
• CV inputs for cutoff/offset, decay and VCF/VCA mode
• Trigger input for built-in decay envelope
• Signal output for decay envelope
• Audio input/output
• Current consumption: 44mA (+12V) / 45mA (-12V)
• Width: 10 HP
• Depth: 35 mm

• Compact synthesizer voice
• 8 Sound generation algorithms: Karplus Strong, Chords, Wavetable, TB303 Bassline Emulation, PWM, Supersaw, Wavefold and Harmonic Saturation
• Tune controller and 2 adjustable parameters per algorithm
• Assignable CV input
• Power requirement: 28 mA (+12 V) / 5 mA (-12 V)
• Width: 3 HP
• Depth: 35mm

• 2 x 104 TE aluminium travel case with lid
• Dimensions (W x D x H): 550 x 300 x 180 mm
• Includes external power supply and 30 patch cables

Modular system consists of:

• Black Wavetable VCO
• 2 x Black VCO2
• Black Multimode VCF
• Black LPG
• Black EG
• 2 x Black Quad VCA2
• Black Stereo Delay
• Black Output
• Black Joystick2
• Black Modulator
• Black Mixer/Splitter
• Black Hole DSP2
• Black CV Tools
• Black Sequencer

• Module for creative sound design with two ring modulators, crossfader and VCA
• Rotary knobs for ring modulator 1&2-CV
• Crossfader and crossfader CV
• Signal and CV input per ring modulator
• AC/DC switch for crossfader
• Two crossfader signal inputs and crossfade CV input
• VCA CV input switchable from unipolar (0V to +10V) to bipolar (-5V to +5V)
• Separate outputs for both ring modulators and crossfader/VCA
• Current consumption: 38mA (+12V) / 32mA (-12V)
• Width: 10 HP
• Depth: 35 mm

• Low, Mid and High Tom in one module
• Controls for pitch, decay and tune per Tom
• Decay range: 370 - 955 ms
• Audio Output Level: -5 to +5 V
• CV level: -5 to +5 V
• Accent CV level: 10V
• Manual triggers
• Trigger level: 5V
• Trigger time: 1 ms
• Connections: Trigger, Accent, Tune CV and Audio Output 3.5mm mini jack per Tom
• Power requirement: 83 mA at +12 V, 76 mA at -12 V
• Dimensions (W x D): 16 HP / HP x 50 mm

• Compact quantiser module
• Storage locations for 8 scales
• Web editor available for creating your own scales
• Adjustable quantisation tolerance in the range of 10% - 50%
• Adjustable glide time
• Connections: Clock In, Clock Out, CV In and CV Out
• Power requirement: 25 mA (+12 V) / 6 mA (-12 V)
• Width: 3 HP
• Depth: 35mm

• Rectangular, sawtooth and triangular waveform oscillators
• Sub oscillator
• Aggressive low pass / band pass filter from the Erica Synths Acidbox
• BBD detune effect for particularly dense sounds
• Noise generator
• Synchronisable LFO for FM and VCF
• Adjustable overdrive
• Envelope intensity for pitch, VCF and VCA separately adjustable
• Intuitive step sequencer with up to 64 steps per pattern
• Automation track for filter cutoff
• Pattern transposition
• Random generator
• Arpeggiator
• Memory for 64 patterns
• CV / gate inputs & outputs
• Clock inputs & outputs
• MIDI In & Thru
• Solid aluminium housing

• 4-Channel VCA and mixer
• Per channel: Level control, signal input/output, CV input and selector switch for logarithmic or exponential response
• Pre-emphasis / de-emphasis circuitry on all 4 channels
• Normalised CV inputs and signal outputs
• Power requirement: 64 mA (+12 V) / 62 mA (-12 V)
• Width: 10 TE
• Depth: 35 mm

• Sturdy and portable 6 U 208 HP Eurorack case in case shape
• Integrated power supply with 60 module slots
• Power supply specifications: 2.5A @ + 12 / 2.5A @ -12V / 1A @ + 5V
• +12 V 3.34 A 100-240 V AC Desktop power adapter included
• With handle
• Material: Aluminium
• Dimensions: 550 x 300 x 180 mm
• Weight: 7 kg

• Revised version of the Black Hole DSP with 24 effects
• Per effect 3 parameters with CV control
• Sample Rate adjustable from "LoFi" to 48 kHz (CV controllable)
• Analog wet / dry controller
• All effect parameters can be stored
• Stereo inputs and outputs
• Clipping LED
• 7 Segment display for effect selection
• Power consumption: +12 V: 70 mA / -12 V: 56 mA
• Width: 16 TE
• Installation depth: 35 mm

• Sampler / Sample Player for live performances
• Two identical channels (A / B) allow recording, playback and editing of samples
• 6 Encoder knobs for real-time editing
• Various playback modes, tuning, VCA, AD envelope and effects per channel adjustable
• Per channel: Trigger input, 3x CV input, audio output
• Stores on micro SD card
• Width: 14 TE
• Includes 16 GB Micro SD card with samples

• 8 Algorithms: Mono Delay, Pitch Shift Delay, Stereo Delay, Granular Delay, Reverb, Saturated Reverb, Leslie Speaker, Overdrive / Bitcrusher
• 2 Parameters per effect can be edited
• CV input for modulations
• Stereo output
• Width: 3 TE / HP
• Depth: 35 mm
• Power requirement: +30 mA (+12 V) / -20 mA (-12 V)

Erica Synths Black K-Phaser; Eurorack module; 8 all-pass filters with photoresistor control; manual controls for phase shift and resonance; phase CV input with attenuverter; mode switch (classic/spread); build-in LFO with rate control knob, rate CV input and two selectable waveforms; LFO signal output; audio input and two audio outputs (main/wet); amount of all-pass filters in the resonance path configurable via DIP switch on the back; power consumption: 88mA (+12V) / 78mA (-12V); width: 10 HP; depth: 35mm