Rode

• Polar pattern: Cardioid
• Integrated pop protection
• MAx. sound pressure level: 121 dBA (@ 1% THD)
• Frequency range: 20-20000 Hz
• Built-in 24 bit / 48 kHz audio interface with USB-C connection
• Class Compliant (no driver installation required)
• Headphone output: 3.5 mm stereo jack with volume control
• Switchable direct monitoring for latency-free microphone signal
• USB powered
• Swivel steel housing with matte black coating
• Removable magnetic table base
• System requirements: from Win 10, from Mac OS 10.12
• Microphone dimensions (W x D x H): 54.5 x 43.9 x 108.1 mm
• Dimensions of table base (D x H): 89.3 x 32.4 mm
• Weight: 585 g
• Includes USB cable

• Perfectly matched to Røde Wireless GO II (Article Nr. 535956)
• Also suitable for other devices with 3.5 mm microphone input
• Compatible e.g. with notebooks, DSLR cameras and mobile recorders
• Miniature condenser capsule with omni-directional characteristic
• Broadcastable sound quality
• Frequency range: 20 - 20000 Hz
• Sound pressure level limit: 110 dB
• Kevlar-reinforced connection cable with 1.2 m length
• 3.5 mm TRS jack plug with gold-plated contacts
• Dimensions (microphone with draft shield): 24 x 11 x 11 mm
• Weight: 12 g
• Includes foam windscreen, crocodile clip and transport bag

Bundle offer comprising

• Matched Microphone Pair
• True condenser microphone with gold sputtered 1/2” capsule
• Cardiod characteristic
• Frequency range: 20 - 20.000 Hz
• Output impedance: 100 Ohm
• Maximum SPL: 143 dB
• Max. output level: +13.9 dBu
• Very low noise
• Requires 48V phantom power
• Dimensions (H x W x D): 118 x 20 x 20 mm
• Weight of each mic: 101 g
• Finish: Satin nickel
• Incl. 2 x foam windscreen WS5
• 2 x RM5 stand adapter and ZP1 carrying case

• Microphone Stand Set
• Consists of microphone stand and microphone cable
• 10 m Microphone cable with 3-pin XLR connectors
• High quality flexible cable
• Microphone stand with boom
• Plastic tripod base
• Maximum usable height of the stand including boom: 190 cm
• Adjustable height of centre column 75 - 130 cm
• Length of boom: 65 cm
• Diameter of stand: 64 cm
• Transport length of tripod: 74 cm
• Thread 3/8" with 5/8" adapter
• Weight of stand: 1.46 kg
• Includes clamp for cable routing

• For creating 360° recordings, 3D audio, VR sound and immersive audio
• Equipped with 4 ultra-low-noise capsules in tetrahedral arrangement
• Solid brass housing with scratch-resistant ceramic coating
• Frequency range: 20 - 20,000 Hz
• Inherent noise: > 15 dBA
• Sensitivity: 30 mV @ 94 dB SPL (1 kHz)
• Peak SPL: 129 dB SPL
• Dimensions: 45.7 x 45.7 x 192.3 mm
• Weight: 286 g
• Includes connection cable (4x XLR, 3 m), microphone holder, basket windshield, fur windshield
• Soundfield by RØDE Plug-In (VST/AAX/AU) for decoding available as a free download

• With three Rycote double-lyre suspensions and enamelled stainless steel pop protection
• For NT1, NT1-A, NT1000, NT2-A, NT2000, NTK, K2

• Optimised for applications using speech
• Directional characteristic: Cardioid
• Frequency response: 50 - 13,000 Hz
• Double-layered pop protection grille from stainless steel
• Internal pop filter
• Robust all-metal housing with scratch-resistant ceramic cover
• Integrated swing mount
• XLR connector
• Dimensions: 172 x 109 x 62 mm
• Weight: 937g

• With 1/2" cardioid capsule and changeable capsule with omnidirectional polar pattern
• High-pass filter and pre-attenuation can be switched in three steps
• Satin nickel-plated metal housing
• Includes omnidirectional capsule NT45-O, stand clamp and metal box
• Includes 10 years manufacturer's warranty

• For the extension of the Rode Blimp windshield
• Suitable for Rode NTG-8 and similar shotgun microphones up to 60 cm long
• Incl. Wind shield Dead Wombat Long, 2 sets of rubber bands and foldable fur brush

Rode VideoMicro II; condenser directional microphone for camera mounting; plug&play (no battery required); full metal housing (aluminum) with scratch-resistant ceramic coating; RF shielding against interference; polar pattern: supercardioid; HELIX Isomount with hot shoe adapter; integrated 3/8" thread for tripod or boom mounting; frequency response: 60Hz - 20kHz; equivalent noise level: 16dBA; sensitivity: 31.6mV; max. SPL: 110dB; TRS output (3.5mm jack); including foam windscreen, WS9 fur windscreen, 24cm TRS/TRS flat ribbon cable (3.5mm jack), 18 - 40cm TRS/TRRS coiled adapter cable SC7 (3.5mm jack); dimensions (L x D): 80 x 22mm; weight: 39g

• Rode NT3 (Spare)

• Suitable for Rode smartLav+, Lavalier GO, RODELink Lav or microphones (mono) with 3.5 mm connector
• Automatic TRS/TRRS detection (no adapter needed)
• For USB-A, USB-C and lightning devices
• Microphone pre-amplification: 0dB - 24dB
• Digital conversion: 24Bit / 48kHz
• Headphone amplifier: 125 mW @ 32 Ohm
• 2 Microphone inputs: 3.5 mm jack
• 1 Stereo headphone output: 3.5 mm jack
• USB-C port
• USB bus-powered
• For Mac and PC as well as for Android devices with USB-C connector and iOS devices with Lightning connector
• Dimensions (W x D x H): 40 x 38 x 11 mm
• Weight: 12 g
• Incl. USB-C to Lightning cable (30 cm), USB-C to USB-C cable (30 cm) and USB-C to USB-A cable (30 cm)

• 1/2" capsule
• Polar pattern: cardioid
• Frequency range: 20 Hz - 20 kHz
• Output impedance: 200 Ohm
• Max. 140 dB SPL
• JFET impedance converter
• Requires phantom power of 24/48V
• XLR connector
• Metal housing
• Weight: 80 g

• With infinitely adjustable pattern
• Frequency spectrum: 20 - 20,000 Hz
• Impedance: 200 Ohm
• Sensitivity: -36 dB re 1V/Pa (16 mV @ 94 dB SPL) +/-2 dB
• Includes SM6 elastic mount with pop shield and ZP1 leatherette carrying case

Rode NTH-100; studio headphones; sturdy headphones ideal for musicians, sound engineers, podcasters, filmmakers etc.; dynamic; closed-back; circumaural; passive noise cancellation; matched 40mm neodymium drivers; durable spring steel headband; adjustable FitLok headband locking system; memory foam ear and head cushions covered with Alcantara; earpads with integrated CoolTech gel; Frequency Range: 5Hz - 35kHz; Impedance: 32Ohm; Sensitivity: 110dB; max. sound pressure: 126dB SPL; single-sided cable routing (left or right connection possible); 3.5mm jacks with bayonet locking connector; detachable straight 2.4m connection cable (3.5mm TRS jack); including jack adapter (3.5mm to 6.3mm), storage pouch, coloured ID rings (blue, green, orange, pink); weight: 344g

• With 1/2" cardioid capsule and exchange capsule with omnidirectional polar pattern
• Strictly selected stereo pair
• High pass filter and 3 step preattenuation
• Satined nickel-plated metal housing
• Frequency range: 20 Hz - 20 kHz
• 156 dB SPL (at maximum of preattenuation)
• 15 dBA inherent noise
• 100 Ohm output impedance
• Weight: 113 g each microphone
• Length: 145 mm
• 20 mm Diameter
• Incl. 2x clamp, 2x wind shield, omnidirectional capsule NT45-O and shaped case
• 10 Years manufacturers warranty

• Supercardioid polar pattern with high directivity towards the front
• Frequency response: 35 - 20000 Hz (± 3 dB)
• High sensitivity: 50 mV
• Max. sound pressure level: 120 dB
• Switchable pre-attenuation (-20 dB)
• Peak LED
• High Pass Filter
• Auto on / off function switchable (plug-in power required on the camera)
• Power supply: internal lithium-ion battery (running time:> 30 hours)
• Integrated 24 bit / 48 kHz audio interface with USB-C connection can also be used as a USB microphone (system requirements: Win 10, Mac OS 10.12)
• Can be operated without an adapter on smartphones with a 3.5 mm TRRS socket
• Aluminium housing
• Connections: 3.5 mm socket with automatic TRS / TRSS detection
• Attachment to the camera with an integrated hot shoe adapter
• Horizontally movable Rycote swing mount SM7-R
• 3/8" Thread embedded in the base for tripod or boom fishing use
• Dimensions: 171 x 21.6 mm (length x diameter)
• Weight: 94 g
• Includes foam windshield and USB-C to USB-A cable

• For Rode Blimp
• Spare part

• Studio quality for the desk
• Integrated audio interface with 16 bit / 48 kHz
• 1.27 cm capsule
• Class compliant for Mac and PC, no drivers required
• IPad-compatible (requires optional Apple Camera Connection Kit, not included!)
• Polar pattern: cardioid
• Frequency range: 20 to 20'000 Hz
• SPL: 110 dB SPL
• Dynamic range: 96 dB
• JFET impedance converter in SMD board
• 3.5mm stereo headphone jack with volume control
• Balance control (direct sound microphone / playback from the computer)
• USB powered (5V DC)
• Dimensions: 184 x 62 x 50 mm
• Weight: 520 g
• Incl. metal pop screen, tripod table stand, mounting ring with tripod mount, USB cable (6 m) and dust bag

• For NT1-A, NT2-A, NT1000, NT2000, NTK, K2, Classic II and Broadcaster