Interface Modules

• Preamplifier for microphone, line and instrument signals
• +48 V Phantom power, switchable
• Impedance selector switch
• Envelope follower with adjustable attack and release time
• Gate and trigger extractor with adjustable threshold
• Audio In: XLR/TRS combo
• Audio out
• Trigger out
• Gate out
• Positive and negative envelope out
• Current consumption: 26 mA (+12 V) / 12 mA (-12 V)
• Width: 8 TE
• Depth: 30 mm

• For connection with Palette Case, 7U Case (only with 7U Audio Jacks Board V2) or the "Stereo Line In Jacks 1U" module
• Balanced stereo input (+4dBu)
• Volume controls for left and right
• Signal LEDs
• Left input normalised to right input for mono signals
• Consumption: 18 mA (+12V) / 12 mA (-12V)
• Width: 12 TE
• Depth: 38 mm

• Dual preamplifier for external signal sources such as guitars, basses, synthesizers, drum computers, etc.
• Two inputs per channel (6.3 mm and 3.5 mm jack), output (3.5 mm jack) and gain control
• Both inputs can be used simultaneously
• Channel 1 normalized to channel 2
• Current consumption: 35 mA (+12 V) / 35 mA (-12 V)
• Width: 4 TE
• Depth: 35 mm

• S/PDIF converter module with coaxial input and output
• Up to 5 modules from the ESX series can be connected (I2S format)
• Sample rates up to 192 kHz on the S/PDIF input
• LED for S/PDIF sync lock
• Power consumption: 26 mA on +12 V (increases with the sample rate, 26 mA at 48 kHz, 32 mA at 96 kHz, etc.)
• Dimensions: 6 HP x 51 mm

• Outputs unipolar (0 V to +5 V) or bipolar (-5V to +5V) control voltage with a connected expression pedal
• Via signal input also suitable as attenuator for audio and CV signals
• Polarity of the expression pedal can be selected on the rear panel
• Consumption: 10 mA (+12 V) / 7 mA (-12 V)
• Width: 10 TE
• Depth: 35 mm
• Intellijel 1 U format

• Audio interface with two inputs for line signals, piezo microphones and dynamic microphones (XLR / TRS combo socket)
• +40 dB gain per channel
• Level display per channel
• Mix output (3.5 mm mono jack)
• Current consumption: 35 mA (+12 V) / 35 mA (-12 V)
• Width: 6 TE
• Depth: 57 mm

• To connect with Palette Case, 7U Case (only with 7U Audio Jacks Board V2) or the "Stereo Out Jacks 1U" module
• Balanced stereo output (+4dBu)
• Volume control
• Signal LEDs
• Left input normalized to right input for mono signals
• Current consumption: 19 mA (+12V) / 12 mA (-12V)
• Width: 8 TE
• Depth: 29 mm

• Synchronization of clock-controlled modules via MIDI and USB
• MIDI input
• USB input for MIDI via USB
• Clock outputs
• Wait button / control input
• LED indicators for Clock, "1" and Start
• Power requirement: +50 mA (+12 V) / -50 mA (-12 V)
• Width: 6 HP
• Depth: 50 mm

• Programmable CV to MIDI interface
• 8 CV inputs, each assignable to MIDI messages such as CC, Notes, Program Change, NRPN and Clock
• Configurations can be saved
• USB-B port (class compliant) and MIDI-TRS socket for MIDI data transmission
• Consumption: 50 mA (+12 V) / 4 mA (-12 V)
• Width: 6 TE
• Depth: 32 mm
• Incl. MIDI-TRS adapter cable

• Bidirectional A/B switch that can be triggered by push-button, trigger input or external foot switch
• Behaviour selectable between push-button and switch
• Compatible with all foot switches and sustain pedals
• Consumption: 20 mA (+12 V) / 11 mA (-12 V)
• Width: 10 TE (pointeuse) + 4 TE (expander)
• Depth: 35 mm (pointeuse), 44 mm (expander)
• Intellijel 1 U format

• Multifunction module: USB MIDI host, USB MIDI device, MIDI to CV converter, clock - and LFO generator, arpeggiator
• 2x CV inputs
• 8x 14-Bit D/A conversion outputs (voltage range via software is selectable between ±5 V, 0-10 V), USB type A, USB type C
• OLED Display
• Rotary encoder with push button
• Power requirement: 118 mA at +12 V, 48 mA at -12 V, plus the power requirement of any attached USB device
• Dimensions (W x D): 8 HP x 48 mm

• USB 2.0 Audio Interface
• Sample support rates: 44.1 / 48 / 88.2 / 96 kHz at 24-bit
• DC-coupled inputs and outputs for use with CVs and audio
• Compatible with all commonly used computer based CV generation software such as Max / MSP, Reaktor, Bitwig Studio, etc.
• 4x 3.5 mm Mini jack line input
• 8x 3.5 mm Mini jack line output
• ADAT input and output
• Class-compliant
• No driver is required for 3.5 mm macOS and iOS
• Windows drivers for Windows 7, 8 and 10 available
• Power requirement: 198 mA at +12 V, 52 mA at -12 V (at 96 kHz)
• Dimensions (W x D): 8 HP x 50 mm

• External input / Envelope follower
• Width: 8 TE / 40.3 mm
• Depth: 45 mm (measured from the back of the front panel)
• Consumption: +30 mA (+12 V) / -20 mA (-12 V)
• Colour: Black

• Converts 8 CV inputs to MIDI and I2C protocol
• 8 CV inputs: 3.5 mm mono jack
• 2x MIDI In/Out/Thru
• 1x I2C port
• Select Bus compatible
• Programming via "Configuration Wizard" (Browser, Windows, macOS)
• 32 Configurations can be stored
• Compatible with Expert Sleepers Super Disting EX, Disting MK4, FH-2, ES-9 and modules from other manufacturers
• Compatible MIDI breakout modules: Expert Sleepers Tiny MIDI Breakout (art. 524446) and MIDI Breakout (art. 443429)
• Electricity demand: 66mA (+12V) / 25mA (-12V)
• Width: 4 TE
• Depth: 46 mm

Bundle offer comprising

• Eurorack Module
• Digital Modular System
• Offers the necessary modules to create your own custom effects, synthesizers, midi controllers and virtual effects from scratch
• More than 80 modules, over 20 ready-made effects like delays, chorus, flanger, overdrive already included
• 64 Patches
• Multifunction knob
• OLED display
• Load and save patches to/from the ZOIA via the included SD card
• 2 Inputs: 3.5 mm jack
• 2 Outputs: 3.5 mm jack
• Headphone connection: 3.5 mm stereo jack
• MIDI input and output: 2x 3.5 mm stereo jack
• 4 CV inputs: 3.5 mm jack
• 4 CV outputs: 3.5 mm jack
• Power consumption: 300 mA (+12V) / 0mA (-12V)
• Width: 34 HP
• Depth: 28 mm

• Desktop Enclosure
• Suitable for Empress Effects Zoia Euroburo (Art. 527629, not included in the delivery)
• Incl. power supply unit and mounting material

• Quad gain converter
• Converts 2 channels from line level to Eurorack level and 2 channels from Eurorack level to line level
• 3.5 mm jack socket for all inputs/outputs
• Low-noise circuit with low distortion
• Consumption: 30 mA (+12 V / 30 mA (-12 V)
• Width: 2 TE
• Depth: 25 mm

• Ideal for connecting multiple systems or housings
• Up to 14 signals can be transmitted via common network cables (RJ45)
• Width: 2 x 4 HP
• Depth: 25 mm
• Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
• Compatible with Intellijel Octalink 1U (Article Nr. 461580), not included
• Scope of delivery: 2 modules and 2 network cables with a length of 0.5 m

• Two adjustable, electronically balanced XLR outputs
• Mini jack stereo headphone output
• Two mini jack mono inputs
• Format: 8 HP
• Depth: 36 mm
• Power consumption: +25 mA (+12 V) / -25 mA (-12 V)