|
|
Effects Unit for Electric Bass
- Distortion / Fuzz
- Controls for: Volume, Tone, Sustain, Blend, Gate, Crossover HPF
- Crossover LPF
- Miniature switch (input 0 / -10 dB)
- Crossover switch
- Bypass switch
- XLR output
- Input and output: 6.3 mm jack
- DI output: 6.3 mm jack
- Dimensions (W x D x H): 120 x 146 x 63 mm
- Power supply via 9 V battery or a 9 V DC power supply (coaxial connection - negative pole inside - not included, e.g. article nr 409939)
|
Price History: Electro Harmonix Deluxe Bass Big Muff Pi
125.00 $ |
|
|
Bass Effect Pedal
- Dual envelope filter
- 2 Low-pass filter (up-attack/ down-attack), single use or together
- Controls for blend - threshold - 2x velocity
- Gig-saver bypass
- Power supply: 9V DC output (power supply not included)
|
Price History: Aguilar Filter Twin
282.00 $ |
|
|
Effects Pedal for Electric Bass
- 2-Band boost
- Controls: 40 Hz bass, 4 kHz treble
- LED: Effect on
- Footswitch: Effect bypass
- Input: 6.3 mm jack
- Output: 6.3 mm jack
- Power supply connection: coaxial connector 5.5 x 2.1 mm, negative polarity inside
- Power supply via 9 V battery or 9 V DC power supply (suitable power supply Art.409939, not included)
|
Price History: Aguilar DB 925 Preamp/ Boost
181.00 $ |
|
|
Effect Pedal for Electric Bass
- Bass Preamp
- Controls: Voice Control, Blend Control, Level Control, Drive Control
- Switches: Treble Boost, Gain Boost, EQ Function Control
- Status LED: Effect On / Overdrive On
- Footswitch
- Input and Output: 6.3 mm Jack
- Power consumption: 200 mA
- Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector negative pole inside) - suitable power supply unit: art. 409939 (not included)
- Dimensions (W x D x H): 130 x 110 x 50 mm
- Weight: 442 g
Note: Battery operation is not supported
|
Price History: Joyo R-26 Monomyth Bass Preamp
81.00 $ |
|
|
Effects Pedal
- Intelligent multiband compression
- Intelligent circuit adapts the pitch and style of the game, resulting in a natural compression that preserves the fundamental bass sound
- 18 Volt input electronics allow enough headroom for clear and powerful sounds without unwanted distortions
- Gain Reduction Display shows the exact degree of compression
- The digital circuit reduces noise
- Controls: Level, Release, Ratio & Threshold
- Power supply with 9 V battery or 9 V DC power supply (coaxial connection - minus pole inside, not included in the scope of delivery, matching power supply available under Art.409939)
- Measurements: (W x D x H): 70 x 125 x 55 mm
|
Price History: Boss BC-1X Bass Compressor
199.00 $ |
|
|
Effect pedal for electric bass
- 3 Switchable compressor models
- Limited edition in black
- By digitally modeling the side-chain circuits of some of the most legendary compressors, the Hyper Luminal captures their
- Characteristic behavior while maintaining a fully analog signal path
- Touch-through metal sensors for Ratio and Mode
- Controls: Blend, Time, Level, Compression, Ratio
- Switch: Mode
- LED: Effect On, Ratio, Gain Reduction
- Footswitch: Effect bypass
- Input: 6.3 mm Jack
- Output: 6.3 mm Jack
- Mains adapter connection (hollow plug socket 5.5 x 2.1 mm, minus pole inside)
- Current consumption: 250 mA
- Power supply via 9 V DC power supply unit (not included in delivery - suitable power supply unit: Article Nr. 409939)
- Dimensions (W x D x H): 42 x 111 x 64 mm
- Weight: 230 g
- Colour: Black
- Made in Finland
Note: Battery operation is not supported.
|
Price History: Darkglass Hyper Luminal Comp. LTD BK
269.00 $ |
|
|
Bundle offer comprising MXR M87 Bass Compressor
- Effect Pedal
- Compressor pedal for electric bass
- CHT "Constant headroom technology" for clean and clear sound quality
- Knobs for output, input, release, attack and ratio
- LED chain with 10 LED for "gain reduction" display
- Status LED
- True bypass
- Sturdy metal housing
- Operated with 9 V battery or Dunlop ECB-003 AC adapter (sold separately, not included here)
Rockboard Pedalsafe Type A1 Rockboard
- Protective Cover
- Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
- Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
- With base plate for mounting on Rockboard pedalboards with click system
- Distance of QuickMount mounting holes (W x D): 51 x 102 mm
- Protects effect pedals from dirt and weather influences
- Protects settings from unintentional adjustment
- Mounts effect pedals securely on RockBoard pedalboards
- No permanent modifications required
- Includes QuickMount pedal mounting plate type A for RockBoard pedalboards and spare screws
|
Price History: MXR Bass Comp Bundle PS A1 RB
217.00 $ |
|
|
Effect pedal for electric bass
- Compressor
- 3 Switchable compression modes: Tubesim, Multiband and Normal
- Controls: Comp, Sens and Gain
- 3-Way mode selector switch
- True Bypass
- Current consumption: 45 mA
- Power supply via a 9V battery or 9-18 V DC power supply unit (not included in delivery, suitable power supply unit: Article Nr. 409939)
- Dimensions (W x D x H): 67 x 115 x 48 mm
- Weight: 315 g
|
Price History: EBS MultiComp Blue Label
169.00 $ |
|
|
Effect Pedal for Electric Bass
- The Octamizer adds a tone that is one octave lower to the original bass signal
- Controls for Octave Level - Clean Level - Octave Filter - Clean Tone
- With Gig Saver function (signal transmission even when the battery is low)
- Can be operated with a 9 V battery or a mains adapter (not included in delivery)
|
Price History: Aguilar Octamizer
226.00 $ |
|
|
Effects Pedal for Electric Bass
- Overdrive with audio interface
- The most versatile bass distortion from Darkglass with integrated audio interface, speaker simulation and Bluetooth (Bluetooth audio in and settings via Darkglass Suite app)
- 6-Band graphic EQ
- Headphone output and balanced direct output
- Controls: Compression, Drive, Character, Blend, Level, 6 Band Eq.
- Footswitches with integrated rotary controls - each of which stores compression, distortion, impulse responses, EQ parameters and signal chain settings
- Instrument input: 6.3 mm jack
- XLR Di-Out (Ground Lift)
- Balanced output: 2x 6.3 mm jack
- Aux input: 3.5 mm
- Headphone output: 3.5mm
- Midi input: 3.5 mm
- Digit cutout interface: USB-C
- Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
- Current consumption: 500 mA
- Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)
- Dimensions (W x D x H): 180 x 120 x 60 mm
- Weight: 0.700 kg
Note: Battery operation is not supported.
|
Price History: Darkglass Adam
519.00 $ |
|
|
Effect Pedal for Electric Bass
- Compressor / Sustainer based on the original Ross compressor and the DynaComp
- With control for level and sustain (compression)
- True Bypass
- Battery operation via 9 V battery or power supply 9 V DC (both not included, suitable power supply: Art.409939)
Note: Each pedal is individually hand-painted and thus a small piece of art and unique, so there may be differences in the design.
|
Price History: Jam Pedals Dyna-ssoR E-Bass
171.00 $ |
|
|
Unfortunately, the product MXR M 280 Vintage Bass Octave is no longer in stock.
|
Price History: MXR M 280 Vintage Bass Octave
179.00 $ |
|
|
Effect Pedal
- Bass Overdrive
- Analog design
- Separate Drive & Blend (Wet / Dry) controls
- Treble & Volume controls
- True bypass
- Metal housing
- Power supply via 9 V battery or 9 V power supply (not included, suitable power supply available under article nr 409939)
- Dimensions: 11.4 x 6.6 x 5.6 cm
- Weight: 272 g
|
Price History: Ampeg Scrambler Bass Overdrive
108.00 $ |
|
|
Effects Pedal for Electric Bass
- 3 Completely independent pedals in one housing
- Signal flow: Bass-> Low Gain Overdrive-> High Gain Overdrive-> Boost-> Amplifier
- Overdrive Low Gain control (Bass Boost switch): Level, Tone, Drive
- Overdrive High Gain control (switch for Bass Boost): Level, Tone, Drive
- Control Clean Boost (switch for Bass Boost and + 20dB Level Boost): Level, Tone
- Push buttons: 3x True Bypass
- Switch: Locked for overdrives
- LED: Effect on
- Footswitch: Effect bypass
- Input: 6.3 mm jack
- Output: 6.3 mm jack
- Power supply connection: coaxial connector 5.5 x 2.1 mm, negative polarity inside
- Current consumption: 50-100 mA
- Power supply via 9 V DC power pack (not included, suitable power pack: Art.409939)
- True bypass
- Dimensions (W x D x H): 145 x 120 x 378 mm
- Weight: 600 g
- Handmade in Germany
Note: Battery operation is not supported.
|
Price History: Rodenberg LDP Deluxe OD/CB
209.00 $ |
|
|
Effect pedal for electric bass
- A clean preamp that amplifies attack and presence while shaping the mid-range for a very percussive and aggressive character
- With a sound circuit that can be controlled with the character knob
- An active 3-band equalizer with semi-parametric midpoints
- Suitable as a supplement to distortion pedals as well as a stand-alone bass preamplifier
- Controls: Boost, Character, Mid Gain, Mid Freq, Bass, Treble
- LED: Effect On
- Foot-switch: Bypass effect
- Input: 6.3 mm Jack
- Output: 6.3 mm Jack
- Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
- Power supply with a 9 V DC mains adapter (not included - suitable mains adapter: Article Nr. 409939)
- Dimensions (W x D x H): 64 x 111 x 43 mm
- Weight: 250 g
- Made in Finland
Note: Battery operation is not supported.
|
Price History: Darkglass Harmonic Booster 2.0 Bass Pre
218.00 $ |
|
|
Effect Pedal for Electric Bass
- Bass Overdrive
- Controls: Tone, Blend, Volume, Gain
- Switches: Mid Boost Switch, Gain Boost Switch
- Footswitch
- Input and output: 6.3 mm jack
- Power consumption: 80 mA
- Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector negative pole inside) - suitable power supply unit: art. 409939 (not included)
- Dimensions: (W x D x H): 109 x 72 x 48 mm
- Weight: 250 g
Note. no baterry operation possible
|
Price History: Joyo R-28 Double Thruster Bass OD
53.00 $ |
|
|
Effect Pedal for Electric Bass
- Equalizer
- Controls: High Pass, Low Pass, EQ Output Level, Low, Low Mid, Mid, High Mid, High
- LED: Effect On
- Footswitch: Filters Bypass / EQ Bypass
- Input: 6.3 mm jack
- Output: 6.3 mm jack
- Power supply connection: Barrel connector 5.5 x 2.1 mm
- Power supply via 9-18 V DC mains adapter (not included in delivery, suitable mains adapter: Art.409939)
- Power consumption: 40 mA
- Dimensions (W x D x H): 104 x 127 x 59 mm
- Weight: 0.6 kg
- Made in USA
|
Price History: Genzler re/Q EQ Dual Pedal
233.00 $ |
|
|
Effect Pedal
- Compressor pedal for electric bass
- CHT "Constant headroom technology" for clean and clear sound quality
- Knobs for output, input, release, attack and ratio
- LED chain with 10 LED for "gain reduction" display
- Status LED
- True bypass
- Sturdy metal housing
- Operated with 9 V battery or Dunlop ECB-003 AC adapter (sold separately, not included here)
|
Price History: MXR M87 Bass Compressor
205.00 $ |
|
|
Effect Pedal
- For E-Bass
- Classic Analog envelope filter sounds
- True bypass
- Controller for Dry, FX, Decay, Q and Sens.
|
Price History: MXR M 82 Bass Envelope Filter
175.00 $ |
|
|
Effect Pedal for Electric Bass
- Compressor EQ
- Modernised circuit
- True bypass
- Controls: Comp, Tilt, Level, Mids
- Switch: Tilt Freq (250 Hz / 900 Hz / 500 Hz)
- Footswitch: Effect Bypass
- LED: On & compression level
- Input and output: 6.3 mm jack
- Power consumption: 22 mA
- Power supply via 9-18 V DC mains adapter (2.1 x 5.5 mm barrel connector, negative pole inside) - suitable power supply available under item no. 409939 (not included)
- Dimensions (W x D x H): 67 x 122 x 40 mm
- Weight: 280 g
- Made in Canada
Note: Battery operation is not supported.
|
Price History: Diamond Bass Compressor EQ
250.00 $ |