Large Diaphragm Microphones

Bundle offer comprising

• Dynamic Large-Diaphragm Broadcast-Quality Microphone
• For radio and dubbing studios as well as for professional podcasting
• Internal pop filter and insensitivity to HF- and other electromagnetic interference
• Neodymium large diaphragm capsule
• Polar pattern: Cardioid
• Frequency range: 75 - 18.000 Hz
• Output impedance: 32 Ohm
• Sensitivity -56.0 dB re 1 V/Pascal (1.60 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
• Length: 214 mm
• Diameter: 53 mm
• Weight: 695 g

• Table Microphone Boom Arm
• Aluminium construction
• Locking centre joint
• 5/8" threaded connector
• Table clamp for up to max. 56 mm table thickness
• Pre-wired with XLR cable
• Length of upper arm: 43 cm
• Length of lower arm: 40 cm
• Colour: Black

• Pressure gradient transducer
• Directional characteristic: omnidirectional, cardioid, figure-8
• Switchable 10 dB attenuation
• Universally applicable: Vocal, speaker, overhead or wind instruments
• Nominal impedance 200 Ohm
• Frequency range 20 Hz...20 kHz
• Peak SPL for K
• 48 V ± 4 V Phantom power required
• Diameter 56 mm
• Length 200 mm
• Weight 500 g
• Including shock mount EA87 and wooden case
• Colour: Nickel

Bundle offer comprising

• Large Diaphragm Tube Condenser Microphone
• Hand-Selected Russian 6072A tubes
• 9 Directional characteristics between omnidirectional, cardioid and figure-8 (switchable on power adaptor)
• Frequency range: 25 - 20,000 Hz +/- 3 dB
• Peak SPL: 136 dB
• High-pass switch: 80 Hz 6 dB
• -10 dB Switch
• Dimensions: 237 x 46 mm
• Weight: 800 g
• Shock mount, power adaptor, 7-pin connector cable, wooden box for microphone and transport case included

• Pop Filter
• For screwing onto microphone shockmount
• With aluminum grid
• Height adjustable
• Clamp for vertical or horizontal mounting
• Clamping range up to 14 mm
• Dimensions of the filter (W x H): 88 x 93 mm
• Rod length: 17 cm
• Weight: 80 g

• Gold-coated 33 mm diaphragm
• Frequency range: 30 - 18,000 Hz
• Polar pattern: Cardioid
• PAD: -10 dB / -20 dB
• Sensitivity: 24.5 mV/Pa
• Impedance: 150 Ohm
• SPL: 140 dB
• Noise floor: 18 dB (A-weighted)
• Power supply: 48 V phantom power
• Dimensions (L x D): 100 x 55 mm
• Weight: 300 g
• Includes microphone holder

• With condenser capsule
• On-Air indicator
• Internal pop filter
• Incl. microphone holder BM1 and case
• Includes a 10 year manufacturer warranty

Bundle offer comprising

• Large diaphragm studio microphone
• USB port for direct operation on the computer
• No additional drivers needed
• Phantom power via USB Port
• Characteristics: Wide Cardioid
• Frequency range: 20 - 18.000 Hz
• External Low Cut and -10 dB Pad Switch
• Compatible with Vista, XP, WIN 7 and 8, Windows 10, Mac OSX, Logic and Garageband (Mac OSX)
• Compatible with Apple iPad 1/2/3 (requires optional Camera Connection Kit, not included)
• Including case, shock mount and USB cable

• Portable Desktop Absorber for Microphones
• Reduces the transmission of unwanted room influences such as reflections, ambient noise and echoes via the microphone
• Height adjustable for ideal positioning on the table
• Stable base-plate with rubber feet to decouple the tripod from the table top
• Tripod height adjustable from 230 to 330 mm
• Dimensions of the screen (L x D x H): 310 x 100 x 230 mm
• Weight: 3 kg

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• With hand-selected 1" capsule
• Ideal for vocals, drums and acoustic instruments
• Directional characteristic: Cardioid
• Requires 48 V phantom power
• Frequency range: 20 - 20000 Hz
• Max. sound pressure level: 125 dB
• Colour: Vintage grey
• Includes elastic holder and transport case

• Switchable directional characteristics: omnidirectional, cardioid, supercardioid, figure eight, 255 intermediate levels via app
• Freely configurable directional characteristics via PolarDesigner plug-in for Win & Mac
• Real-time access to directional characteristics via optional OCR8
• Bluetooth dongle (Art.467336 - not included) and PolarPilot app for Android & iOS
• Handmade CKR12 ceramic capsule based on the CK12 capsule
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 13 mV / Pa
• Output impedance: 2x 275 Ohm (balanced)
• Input impedance: 1 kOhm
• Max. sound pressure level: 148 dB / 158 dB (with pad)
• Inherent-noise: 9 dB SPL (A)
• Signal-to-noise ratio:> 84 dB
• Low cut filter: 40, 80 & 160 Hz
• Pad: -10 dB & -20 dB
• Dimensions (OC818 microphone): 157 x 63 x 35 mm
• Weight (OC818 microphone): 360g
• Includes 2 elastic brackets, 2 mini XLR adapters, 2 microphone clips, 2 windscreens, transport case and adjustable stereo rail
• HAndmade in Vienna

Note: requires 48 V phantom power.

• Sontronics STC-20
• Elastic suspension
• Pop screen
• 5m XLR cable
• Includes a bag for the microphone

Technical data STC-20:

• Large diaphragm microphone
• Cardioid
• 1" Membrane
• Ideal for vocals and acoustic instruments
• High transparency
• Open, silky sound
• Frequency range: 20 Hz - 20 kHz
• Max. SPL 120 dB
• Impedance 200 Ohm
• Dimensions (HxWxD): 194 x 53 x 53 mm
• Weight: 696 g

• Set consisting of STC-2, spider, pop shield, XLR cable (3 m) and storage bag
• Polar pattern: cardioid
• 1" Capsule
• Frequency response: 20 - 20,000 Hz
• Low-cut filter
• Adjustment: -10 dB
• Sensitivity: 12 mV / P a -38 dB ± 2 dB
• max. SPL: 120 dB
• Impedance: = 200 Ohm
• Requires a 48 V phantom power
• Connection: 3-pole XLR
• Dimensions of the microphone (H x W x D): 194 x 53 x 53mm
• Weight: 1100 g
• Colour: Black

• With dual diaphragm
• Switchable directional characteristics: Omni, cardioid and eight
• Frequency range: 20 - 20,000 Hz
• SPL: Peak 131 dB SPL
• 2 X 24 k gold-plated Mylar membrane
• 15 dB attenuation element for very high sound pressure
• Three-stage switchable low cut filter
• Integrated pop protection
• Including spider and storage bag with zipper

Bundle offer comprising

• Large diaphragm condenser studio microphone
• 1” capsule with cardioid characteristic
• Transformerless circuit
• +48 V phantom power required
• Frequency range: 20-20000 Hz
• Sensitivity: -34 dB (0dB=1V/Pa)
• Output impedance:
• Max SPL 132 dB
• Inherent noise: 12dB(A)
• Incl. wind shield, shock mount and zipper bag

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• Microphone cable
• XLR 3-pin male - XLR 3-pin female
• Length: 6 m
• Diameter: 6 mm
• Wire cross-section: 2 x 0.22 mm²
• Colour: Black

• Successor to the C 414B XLS
• Now with 9 switchable directional characteristics (cardioid, wide-cardioid, hypercardioid, omnidirectional, figure-8 + 4 intermediate positions)
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 140 dB(SPL) max
• Lock mode to save the settings
• Peak-Hold display
• Status LEDs
• 3-Way switchable bass cut filter (0/40/80/160 Hz)
• 3 Preattenuation pads (0/-6/-12/-18 dB)
• Transformerless XLR Output (FET)
• Incl. elastic mounting (H85), windshield (W414X), H50 stereo bar and aluminium case
• On option available: pop filter PF 80
• Dimensions: (W x D x H) 395 x 315 x 105 mm

• Based on an EF86 pentode tube
• Switchable polar pattern: cardioid, omnidirectional, figure eight
• Replica of the K67 capsule
• Frequency range: 20 - 20000 Hz
• Switchable 80Hz high pass filter
• Switchable -10db attenuation
• Nominal impedance: 200Ohm
• Nominal load impedance: 1kOhm
• Equivalent noise level (A-weighted): 17dBa
• Maximum SPL for THD 0.5%: 138dB
• Signal-to-noise ratio (A-weighted): 78dB
• Includes 7-pin Gotham cable, elastic suspension, microphone holder, power supply unit and wooden storage box

Rode X XDM-100; USB-C speaker microphone; dynamic large-diaphragm capsule; optimized for streamer and gamer; polar pattern: cardioid; ultra-low noise Revolution high-gain preamp; integrated DSP chip with high-pass filter, noise gate, compressor and Aphex; digital conversion: 24bit / 48kHz; frequency response: 20Hz - 20kHz; headphone volume control with integrated mute switch; stereo headphone output with zero latency monitoring (3.5mm jack); digital output: USB-C; plug&play to Mac and PC; rugged metal housing; including foam pop shield, PSM-1 shockmount, 3m headphone extension cable (3.5mm jack), 3m USB-C to USB-C cable, perpetual license for UNIFY streaming/recording software (download); microphone dimensions (W x D x H): 62 x 52 x 213mm; weight: 700g

• 1” capsule with cardioid characteristic
• Transformerless circuit
• +48 V phantom power required
• Frequency range: 20-20000 Hz
• Sensitivity: -34 dB (0dB=1V/Pa)
• Output impedance:
• Max SPL 132 dB
• Inherent noise: 12dB(A)
• Incl. wind shield, shock mount and zipper bag

Bundle offer comprising

• Dynamic Speaker and Recording Microphone
• Polar pattern: Cardioid
• Frequency range: 50 - 20,000 Hz
• Sensitivity -59.0 dB (1.12 mV)
• Bass roll-off switch
• Mid-boost switch
• Impedance: 150 ohms
• Shielding against electromagnetic interference
• Swivel mount
• XLR connector
• Dimensions: 190 x 64 x 96 mm
• Weight: 766 g
• Includes switch cover plate and windscreen
• Suitable foam windscreen: Art.263050
• Suitable replacement pop-up windscreen: Art.157230

• Table microphone arm with cable guide
• Cables up to 8 mm in diameter can be attached to the underside of the arms with a clip system
• Aluminium construction
• Locking centre joint
• 3/8" Rhreaded connection with 5/8" adapter
• Table clamp up to 56 mm or table feed-through up to 45 mm (20 mm hole)
• Length upper arm: 43 cm
• Length lower arm: 43 cm
• Colour: Black

• Microphone Cable
• Length: 3 m
• For stage and studio applications
• 2x 0.22 mm² (AWG 24)
• Hicon HI-X3CM - HI-X3CF connector
• PVC sheath with 6.4 mm diameter
• Colour: Black