Tube Guitar Heads

• Power: 100 watts
• All tube
• 3 Channels
• Per Channel: Gain, Low, Mid, High, Volume, Channel Select and Presence Control
• Effect Loop
• 2 Speaker outputs with impedance switch: 4.8 and 16 ohms
• Weight: 27.2 kg
• Dimensions (HxWxD): 26 x 75.5 x 29.3 cm
• Colour: Ivory
• Includes footswitch

• Hughes&Kettner GrandMeister Deluxe 40
• Thon Hughes&Kettner Tube/Grandm. 36

Bundle offer comprising

• Tube Amp Head for Electric Guitar
• Channels: 2
• Power: 25 watts
• Preamp tubes: 4x ECC83 / 12AX7
• Power tubes: 2x 6L6GC
• Controls: Clean Gain, Lead Gain, Bass, Middle, Treble, Lead Volume, Master Presence, Noise Gate (Threshold)
• Switches: Mid Boost, Clean Lead, Stand By, Power, Power Soak (Full, 5 W, 1 W, Speaker Off)
• Effects: Noise Gate
• Speaker outputs 8-16 ohms: 2x jack
• Effect grinding paths
• Input: 6.3 mm jack
• FX Send & Return: 2x 6.3 mm jack
• DI output: 6.3 mm jack
• 2 Footswitch connections: (Mid Boost, FX Loop On / Off, Clean / Lead, Master Volume Boost)
• Dimensions (W x D x H): 420 x 230 x 200 mm
• Weight: 11 kg
• Made in Germany

• Case
• Suitable for Engl E633 Fireball 25
• 6.8 mm Birch multiplex phenolic resin coated
• 22 x 22 mm Aluminium edge
• 2 Small butterfly fasteners
• 1 Strap handle
• 8 Small ball corners
• 4 Rubber feet: 25 x 15 mm
• Foam padding
• Unit can be operated in the lower part
• All connections freely accessible
• External dimensions (W x D x H): approx. 477 x 286 x 288 mm
• Weight: approx. 4.5 kg
• Colour: Brown
• Made in Germany

• 4 Channels: Clean, Crunch I, Crunch II, Lead
• Power: 120 W
• Full tube design - no semiconductors in the signal path
• Preamplifier tubes: 6x Engl ECC83 / 12AX7
• Power amp tubes: 2x Engl 6550
• 2 Tube-driven FX loops with separate balance controls
• Noise Gate with adjustable threshold (footswitchable)
• Engl Power Tube Monitor
• MIDI-In / MIDI thru
• Engl MIDI foot controller phantom power switch
• MIDI Channel Assignment and Controller Enable Switch
• Write / Copy (for MIDI programming)
• All switching functions MIDI programmable (excluding Power and Stand By)
• S.A.C.: Serial Amp Control port
• Sound Switching options: Input Lo / Hi, Bright, Preshape, Contour (Clean, Crunch I), Mid Le./Bo., Depth Boost, Gain Lo / Hi, Contour (Crunch II, Lead), Rough / Smooth
• Controls: Gain (separate for each channel), Bass, Mid Lean, Mid Bold, Treble (Clean, Crunch I), Bass, Middle, Treble, Tone Balance (Crunch II, Lead), Volume (separate for each channel), Presence A, Presence B, Master A, Master B
• Controls (rear side): Noise Gate Threshold Level, FX Loop I Balance, FX Loop II Balance
• Outputs: 1 x 4 Ohm, 2 x 8 Ohm, 2 x 16 Ohm, 1 x 16 Ohm
• Line out
• Dimensions (W x H x D): 71 x 27 x 29 cm
• Weight: 22 kg
• Made in Germany

• 2 Channels
• Power: 50 Watt
• Tube configuration: 3x JJ ECC83S, 2x New Sensor EL34EH
• Volume control per channel (Treble and Bass)
• Presence, Bass, Middle and Treble EQ controls
• Bright switch for treble channel
• High Mid Gain Switch
• Switchable impedance (4/8/16 Ohm)
• Adjustable bias
• Dimensions (H x W x D): 25.4 x 54.6 x 25.4 cm
• Weight: approx. 10.5 kg
• Colour: Black

• Class-A circuit with power reduction
• 1 Channel
• Power: 5W - can be reduced to 0.1W or 1W
• Preamp tube: 12AX7
• Power tube: EL84
• Controls for bass, treble, volume
• Speaker output: 8 or 16 Ohms
• 6.3 mm jack input
• Robust metal housing
• Dimensions (W x H x D): 205 x 127 x 140 mm
• Weight: 3.2 kg

Bundle offer comprising

• Head amp for electric guitar
• All tube
• Power: 40 W
• 3 Channels: Clean, Crunch and Lead
• Power Soak: 40/20/5/1/0 W
• 3 x 12AX7 Preamp tubes
• 4 x EL84 Power tubes
• 2 Classic 3-band EQs
• TSC Tube Safety Control for constant and automatic monitoring and control of the final power tube bias
• Red Box AE Ambience Emulation DI output with the settings Vint. / Mod. and Small / Large to connect the amp directly to the PA or a recording setup
• Integrated MIDI IN with phantom power
• Serial FX loop
• 1 Speaker output: 8 - 16 Ohm
• Measurements: 44 x 17 x 15 cm
• Weight: 8 kg
• Incl. bag
• Corresponding foot switches: Article Nr 135680#/323250# (not included)

• Rack Mount Set
• Suitable for TubeMeister 36, TubeMeister 40 Deluxe, GrandMeister 36, GrandMeister Deluxe 40
• Simple and quick-to-install solution for taking the TubeMeister amp in the rack
• The Rack Mounts RM-40 are screwed to the side of the amp and turn your TubeMeister or GrandMeister into a 19 "rack device
• Height: 4 U
• Weight per angle: 250 g
• Made in Germany

Note: Use only in combination with a rack fan (not included). We recommend mounting the fan over the amp.

• John Petrucci Signature Model
• All-tube
• 3 Channels with five modes
• Power: Class A / B circuit, 100 / 60 W
• 4x 6L6 power tubes
• 5x 12AX7 preamp tubes
• 2x 5-Band graphic EQs - both can be assigned to either a footswitch or a channel
• All-tube spring reverb: Channel 1 + 2 + 3 can be set separately (rear side), and are footswitchable
• All-tube FX loop: Tube buffered and MIDI switchable
• Built-in CABCLONE cabinet simulator with integrated load resistance and headphone output
• Speaker on / off and ground lift switch
• MIDI controllable / programmable
• Slave Out
• Aluminium chassis
• Dimensions (H x W x D): Approx. 24 x 48 x 28 cm
• Weight: 18.5 kg
• Includes a new 3 x 3, 6-button footswitch and cover
• Made in the USA

Channel 1:

• Mark IIC+ Clean
• Independent Gain, Treble, Mid / Boost, Bass, Presence, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

Channel 2:

• Legendary Mark IIC+ Lead or Shred mode
• Independent gain with pull function: Gain Boost, Treble, Middle, Bass, Presence with pull function: Frequency Shift, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

Channel 3:

• Legendary Mark IIC+ Lead or Shred mode
• Independent gain with pull function: Gain Boost, Treble, Middle, Bass, Presence with pull function: Frequency Shift, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

• Power: 50 W
• 2 Channels
• Power amp tubes: 2x EL-34
• Tube preamp: 3x 12AX7
• 2 Master volume controls and 2 gain controls
• EQ: Bass, Middle, Treble & Presence
• Clean Channel: 3-Way bright switch
• Line Out with level control
• Ultra Transparent Series FX Loop
• 4, 8 & 16 Ohm impedance switch
• Custom USA transformers
• Dimensions (D x W x H): 222,36 x 609,6 x 254 mm
• Weight: 15.2 kg
• 1-Way foot switch with LED included
• Made in the USA

• Power: 100 W
• 4 channels with all-tube technology - no semiconductor in signal path
• Preamp tubes: 5 x ECC 83
• Power amp tubes: 4 x EL34
• Individual 3-band EQ as well as gain and volume for each channel
• 12 basic sounds can be chosen directly via foot switch or MIDI
• EL34 power amplifier with presence and resonance control
• 2 switchable and programmable master volume controls
• Programmable parallel FX loop with hardware bypass
• Digital reverb with individual controls for each channel
• Series insert loop with hardware bypass circuit
• Emulated DI out
• MIDI IN and MIDI THRU
• Dimensions:: 740 x 310 x 215 mm
• Weight: 22 kg
• Foot switch included
• Suitable dust cover: Article no. 150488 (not included)
• Suitable case: Article no. 227873 (not included)

• Power: 20 Watt
• 2 Channels
• Preamp tubes: 2x ECC83
• Power Tubes: 2x EL34
• InfiniumTube Life Multiplier technology
• Controls: Master, Reverb, Morph (regulates between US and British sound), Treble, Middle, Bass
• Overdrive: Volume & Gain
• Clean: Tone & Volume
• Speaker Emulated Output: 1x 12" and 4 x 12" voicing options
• Impedance selector switch: 4, 8 and 16 Ohm
• FX Loop with effects level knobs
• Includes footswitch for channel and reverb

• Big KT66 tube sound with a defined midrange that asserts itself in the mix
• Channels: 1
• Power: 50 watts
• Power scaling from 50 watts down to 1 watt without loss of sound
• Footswitchable boost
• Preamp tubes: 2 x 12AX7
• Power amp tubes: 2 x KT66
• Controls: Gain, Volume, Bass, Middle, Treble, Power, Boost Level
• Switch: Boost
• Speaker outputs: 8 and 16 ohms (3 x 6.3 mm jack)
• Input: 6.3 mm jack
• Foot switch connection: 6.3 mm jack
• Dimensions (W x D x H): 432 x 191 x 248 mm
• Weight: 12.7 kg
• Includes footswitch
• Made in USA

• Preamp based on the classic 1959 SLP
• 1 Channel with 4 separate inputs
• Power: 20 W with power reduction to 5 W
• Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34
• DI out
• Serial FX loop
• Dimensions: 500 x 240 x 230 mm
• Weight: 9.25 kg

• Further developed version of this legendary high-gain amplifier with lower noise level
• 2 Channels
• Power: 100 watts
• Preamp tubes: 4x 12AX7
• Power tubes: 4x 6L6
• Ultra-transparent post master FX loop with return level
• Channel switch on the front
• With Soldano Depth-Mod
• Controls: Ch.1 Gain, Ch.1 Master, Ch.2 Gain, Ch.2 Master, Bass, Middle, Treble, Depth, Presence
• Switches: Channel Switch, Bright Switch, Mode Switch (Clean/Crunch), Fx Loop On/Off
• 2 Speaker outputs: 6.3 mm jack, with 16, 8, 4 Ohm switch
• Effects loop: Ultra transparent series
• Finish: Snake Tolex, Classic Metal Grille & White Faceplate
• Made in USA

• 3 Channels
• Power: 50 Watts
• Preamp tubes: 7x JJ ECC83S (12AX7)
• Power tubes: 2x EL34
• Controls: Volume, Gain, Low, Mid, and High EQ
• With global presence and resonance control for all 3 channels
• Channel 1 and 2 has shared volume and gain with low, mid, and high controls
• Effects loop
• 2 Speaker outputs with impedance switches - 4, 8 and 16 Ohms
• Headphone output
• Weight: 11.4 kg
• Dimensions (H x W x D): 21.6 x 50.8 x 30.4 cm
• Colour: Black
• Incl. foot switch

• 4 Channels: Clean, Crunch I, Crunch II, Lead
• Power: 60 W
• Full tube design - no semiconductors in the signal path
• Preamp tubes: 6 X Engl ECC83 / 12AX7
• Power tubes: 2x Engl EL34
• 2 Tube-driven FX loops with separate balance controls
• Noise Gate with adjustable threshold (footswitchable)
• Engl Power Tube Monitor
• MIDI in / MIDI thru
• Engl MIDI foot controller phantom power switch
• MIDI Channel Assignment and Controller Enable Switch
• Write / Copy (for MIDI programming)
• All switching functions MIDI programmable (excluding Power and Stand By)
• S.A.C.: Serial Amp Control port
• Sound Switching options: Input Lo / Hi, Bright, Preshape, Contour (Clean, Crunch I), Mid Le./Bo., Depth Boost, Gain Lo / Hi, Contour (Crunch II, Lead), Rough / Smooth
• Controls: Gain (separate for each channel), Bass, Mid Lean, Mid Bold, Treble (Clean, Crunch I), Bass, Middle, Treble, Tone Balance (Crunch II, Lead), Volume (separate for each channel), Presence A, Presence B, Master A, Master B
• Controls (rear side) for Noise Gate Threshold Level, FX Loop I Balance, FX Loop II Balance
• Outputs: 1 x 4 Ohm, 2 x 8 Ohm, 2 x 16 Ohm, 1 x 16 Ohm
• Line out
• Dimensions (W x H x D): 71 x 27 x 29 cm
• Weight: 21 kg
• Made in Germany

• All-tube
• Power: 30 W
• Preamp tubes: 3 x 12AX7
• Power tubes: 4 x EL84
• 4 Inputs: Normal (Hi / Lo) Top Boost (Hi / Lo)
• Controls: Master Volume, Master Tone Cut, Tremolo Depth, Tremolo Speed, Reverb Level, Top Boost Bass, Top Boost Treble, Top Boots Volume & Normal Volume
• FX loop
• Dimensions: 705 x 266 x 284 mm
• Weight: 18.8 kg
• Compatible footswitch: Vox VFS2 (Art.165749 - not included)

Bundle offer comprising

• Guitar Tube Head Amp
• 100 W, 2 Channels

Controls:

• Clean gain
• Lead gain
• Bass
• Middle
• Treble
• Lead volume
• Master A
• Master B
• Presence

Switches

• Bright
• Bottom
• Mid boost
• Channel switch
• Adjustable noise gate
• Switchable effects
• Tube Monitor system
• 4 x ECC83
• 4 x 6L6GC
• Dimensions: 71 x 27 x 27 cm
• Weight: 22 kg

• Protective Cover Engl Standard Head
• For Engl Fireball 100, Fireball 60, Powerball, Blackmore
• Made of high-quality water resistant nylon
• Manufactured in Germany