Allround Microphones

• Dynamic
• Directional characteristic: Super-cardioid
• Frequency range: 50 - 16,000 Hz
• Impedance: 300 Ω
• Sensitivity: -54 dBV/pa (2.0mV/pa)
• Peak SPL: 150dB
• Low-Mid Boost 60-240 Hz
• Flat mesh head
• Black body
• Also suitable for string and percussion instruments
• Incl. microphone clip

Similar to the CK 91 but reaches a greater attenuation of 120° off-axis sounds. The high directivity is optimized by the flat frequency curve.

• For AKG SE 300 B
• Very homogeneous hyper-cardioid polar pattern and good, frequency independent off-axis attenuation
• Directional characteristic: Hyper-Cardioid
• Frequency range: 20-20,000 Hz
• Open circuit sensitivity: 10 mV / Pa (-40 dBV)
• Peak SPL: 132/142 dB (k = 1%)
• Equivalent SPL (CCIR 468-3): 28 dB
• Equivalent SPL: 17 dB-A
• Signal / noise ratio (A-weighted): 77 dB
• Supply voltage via SE 300B
• Current consumption via SE 300B
• Connector: Bayonet
• Surface: Dark grey
• Dimensions: 19 Ø x 36/51 mm
• Net weight: 35 g
• Including windscreen

Bundle offer comprising

• Dynamic Microphone

The Shure Beta 52A is a dynamic microphone with high output power and a transmission range specially optimised for maximum bass drum punch and accommodating other low-frequency instruments.

It offers a very good response, excellent punch and delivers studio quality even at extreme volume. The superheterodyne characteristics of the Beta 52A ensure maximum isolation of the sound source and high feedback while considerably diminishing background noise.

The adjustable tripod adapter with integrated XLR connector simplifies the positioning of the microphone, especially when used inside the bass drum. At the same time the snap-in tripod adapter holds the Beta 52A securely in place even in hard shocks and strong vibrations. The basket made of hardened steel provides protection against the stresses of the rough stage.

• Super-cardioid
• Optimized frequency response especially for bass drum kick and low-frequency instrument pickup
• High feedback with minimal background noise
• Portable stand adapter with integrated XLR connector for easy installation, especially in the bass drum
• Basket made of hardened steel protects against wear and damage
• Air-sprung vibration absorber protects against impact sound and vibrations
• Neodymium magnet for high output levels
• Low sensitivity against different connection impedances
• Transmission range: 20 - 10,000 Hz
• Maximum sound pressure: 174 dB SPL (up to 1 kHz, calculated)
• Output Impedance: 45 Ohm
• Noise Sensitivity: -64 dBV / Pa (0.63 mV)
• Weight: 605 g
• Tripod mount
• Including bag

• Micro Tripod For Bass Drum
• Special tripod for the positioning of the microphone in front of or in the bass drum
• Extendable
• Dimensions: 20 x 19 x 18 to 24.5 cm
• Colour: Black
• Included: Thread Adapter 3/8 "- 5/8"

Bundle offer comprising

• Large-Diaphragm Tube Microphone
• 1.07" Gold membrane
• Super warm sound
• Directional characteristic: Cardioid
• Frequency profile: 20 / 20,000 Hz
• Output Impedance: 200 Ohm
• Sensitivity: 36 +/- 2 dB (0 dB-1V/Pa 1000 Hz)
• Incl. transport case, windscreen, shock mount and external power supply
• Dimensions: 59 x 180 mm
• Suitable cable between microphone and power supply included

• Pop Filter
• For screwing onto microphone shockmount
• With aluminum grid
• Height adjustable
• Clamp for vertical or horizontal mounting
• Clamping range up to 14 mm
• Dimensions of the filter (W x H): 88 x 93 mm
• Rod length: 17 cm
• Weight: 80 g

• For radio and dubbing studios as well as for professional podcasting
• Internal pop filter and insensitivity to HF- and other electromagnetic interference
• Neodymium large diaphragm capsule
• Polar pattern: Cardioid
• Frequency range: 75 - 18.000 Hz
• Output impedance: 32 Ohm
• Sensitivity -56.0 dB re 1 V/Pascal (1.60 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
• Length: 214 mm
• Diameter: 53 mm
• Weight: 695 g

• For stage and studio operation
• Elastically mounted 3/4" true condenser capsule - externally polarized
• Cardioid
• Frequency range: 20 - 20,000 Hz
• Peak SPL: 140 dB
• Sensitivity: 12 mV
• Inherent noise: 16 dBA
• Operated with 48 V phantom power or 9V battery (not included)
• On/ off switch with battery status LED
• Address type: front
• Satined nickel-plated metal cast housing
• Robust windscreen
• Effective shielding RF interference
• For outdoor recording and stage use
• Ideal for recording choir, brass orchestra and other acoustic instruments
• Thanks to good structure-borne noise suppression it can also be used as moderation microphone
• Length: 20.6 cm
• Diameter: 3.2 cm
• Weight (without battery): 371 g
• Incl. foam windscreen WS 3, RM3 stand clamp and ZP1 transport case

• With integrated Rycote lyre bracket
• High pass filter switchable
• Level adjustment (-10 dB / +20 dB) switchable
• On/Off switch
• Charge status LED indicator
• Transducer type: Pressure gradient transducer
• 2x 1/2" condenser capsule
• JFET impedance converter
• Directional characteristic: 2x cardioid (X/Y)
• Frequency range: 40 Hz - 20 kHz
• Inherent noise: 20 dBA
• Dynamic range: 114 dB
• Sensitivity: 38.0 mV/Pa
• Maximum sound pressure: 134 dB (1 kHz, 1% THD, 1 kOhm load)
• Output impedance: 200 Ohm
• Maximum output level: +4.2 dBu (1 kHz, 1% THD, 1 kOhm load)
• Connector Type: 3.5 mm mini jack
• Power supply via 9 V battery (over 100 hours continuous operation, not included)
• Dimensions (W x D x H): 80 x 115 x 134 mm
• Weight: 116 g
• Improved foam windshield included

• Polar pattern: supercardioid
• Frequency range: 50 - 16000 Hz
• Impedance: 200 Ohm
• Max. 140 dB SPL
• Grey housing
• Incl. microphone holder

• Omnidirectional
• Frequency range: 20 - 20.000 Hz
• Max. SPL: 137 dB
• Impedance: 250 Ohm
• Switchable low cut at 80Hz
• Operates with 1.5V AA batteries or 10-52 Volt phantom power
• Length: 178.0 mm
• Incl. AT8405a stand clamp, AT8136 windscreen, batteries, microphone case

Bundle offer comprising

• Condenser instrument microphone
• Easy installation with various instrument holders for many different instruments (not included)
• Flexible gooseneck 120 mm for easy alignment on the instrument
• Detachable cable with screw contact
• 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)
• Polar pattern: Cardioid
• Frequency range: 30 - 20.000 Hz
• Sensitivity: -38 dB +/- 2 dB
• Max. SPL: 130 dB
• Signal-to-noise ratio: 71 dB
• Impedance 100 Ohm
• Distortion factor:
• Cable length approx. 2 m
• Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)
• Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm

• Microphone Mount
• Guitar clip for the Lucan System CC 200 RC
• Suitable for clamping onto guitars or similar instruments with a thickness between 73 and 120 mm

• Hardcase
• For the Lucan System CC 200 RC
• With space for all system components (microphone, phantom adapter, cable, 1x holder each GH, VH,CH, PH,MH,SH)
• Dimensions (L x W x H): 33 x 22 x 7 cm

• Microphone Mount
• Violin clip for the Lucan System CC 200 RC
• Suitable for clamping to violins or similar instruments with a thickness of 35 to 55 mm

• Microphone Holder
• Clarinet-clip for the Lucan System CC 200 RC
• For fixing on clarinets or similar instruments with a strong hook-and-loop tape up to a diameter of 65 mm

• Microphone Mount
• Piano clip for the Lucan System CC 200 RC
• Suitable for fixing on pianos or similar instruments with strong magnets

• Microphone Mount
• Multi-Clip for the Lucan System CC 200 RC
• Suitable for clipping onto cello, saxophone, trombone, cornet or similar instruments with a thickness up to 23 mm

• Microphone Mount
• Tripod clip for the Lucan System CC 200 RC
• Suitable for screwing onto all stands with a standard 5/8" thread

• For recording and live applications
• Polar pattern: cardioid
• Frequency range: 50 - 16 kHz
• Sensitivity: -58 dB (1.3 mV) ref 1V at 1 Pa
• 1 kHz
• Output impedance: 200 Ohm
• Switch for low-cut: 200 Hz
• Articulation boost: 3 - 5 kHz
• Apollo Channel Strip preset frequencies
• Integrated bracket and foam windscreen
• Connector: XLR
• Dimensions (length x diameter): 195 x 60 mm
• Weight: 735 g
• Incl. thread adapter 5/8" to 3/8

Bundle offer comprising

• Dynamic Instrument Microphone
• For live and studio applications
• Supercardioid
• Frequency range: 50 - 16,000 Hz
• Sensitivity: 2.7 mV / Pa, -51.5 dB re 1 V / Pa
• Peak SPL: 132 dB
• Impedance: 415 Ohm
• Dimensions: 52 x 165 mm
• Weight: 270 g
• Microphone holder and plastic case included

• Microphone stand with boom arm
• Length: ca. 92 to 150 cm
• Boom arm length : 70 cm
• Thread: 3/8" and with a 5/8" adapter
• Weight: 2.2 kg
• Colour: Black

• Microphone Cable
• XLR 3-pin male XLR 3-pin female
• Length: 10 m
• Diameter: 6 mm
• Wire cross-section: 2 x 0.22 mm²
• Colour: Black

• Flexible earhook
• Solid and robust cable
• Directional characteristic: Omnidirectional
• Frequency range 20 - 20,000 Hz
• Peak SPL: 107 dB
• Connection: 4-Pole Shure TQG connector
• Weight: 19.76 g
• Colour: Black
• Incl. bag WA153, 3x windscreens and clip

• For kick drum and other bass-intensive sources
• Cardioid characteristic
• Frequency range: 20 - 16000 Hz
• Impedance: 500 ohms
• Sensitivity: -69 dBV / Pa
• 3-Pin XLR connector gold-plated
• Integrated tripod adapter for easy installation
• Weight: 0.74 kg
• Includes transport bag

• Frequency range: 50 Hz - 18 kHz
• Max. SPL: 145 dB
• Impedance: 600 Ohm
• -30 dB rear attenuation
• Wide and balanced frequency response with the typical HEIL pleasant sounding mids
• In combination with the high back and side attenuation an ideal allround microphone for stage and studio
• Very suitable for live vocals and snare drum
• Recommended applications: singing, speaking, snare drum, cymbals, piano, guitar and banjo
• Colour: Black

• For lead and backing vocals
• Suitable for live and recording applications
• Dynamic hypercardioid capsule provides a clear and clean source recording with high gain before feedback
• Impedance: 150 Ω
• Frequency response 40 Hz - 19 kHz
• Maximum SPL: 144dB
• Length 176 mm
• Weight 307 g
• Incl. Softbag and microphone clip

Bundle offer comprising

• Dynamic Microphone

The MD 441 U is a microphone of an exceptional quality: its acoustic properties correspond to those of a condenser microphone. Transient response and low distortion are ensured even at extremely high sound pressure. Surface: all metal body with black imitation leather finish, sound inlet basket: nickel plated

• Very feedback resistant
• Super-cardioid
• Tunable HP and HF shelve, XLR
• Impedance: 200 Ohm
• Frequency range: 30 Hz - 20 kHz
• Size: 270 x 33 x 36 mm
• Weight: approx. 450 g
• Incl. clamp and storage box
• Suitable matching clamp: Article Nr 106538 (not included)

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

• Supercardioid
• Frequency range: 80 - 12,000 Hz
• Impedance: 500 Ohm
• On/Off switch
• Colour: Blue/black
• Weight: 250 g
• Clamp included
• Set of 6

Bundle offer comprising

• Dynamic Podcast Microphone with XLR Output
• Cardioid characteristic
• Frequency range: 50 - 16,000 Hz
• XLR output impedance: 252 ohms at 1 kHz
• 5/8" Thread for stand mounting
• Weight: 0.55 kg
• Dimensions with bracket (H x L x D): 164 x 153.6 x 90.2 mm
• Includes adapter from 3/8" - 5/8" thread

• Table microphone arm with cable guide
• Cables up to 8 mm in diameter can be attached to the underside of the arms with a clip system
• Aluminium construction
• Locking centre joint
• 3/8" Rhreaded connection with 5/8" adapter
• Table clamp up to 56 mm or table feed-through up to 45 mm (20 mm hole)
• Length upper arm: 43 cm
• Length lower arm: 43 cm
• Colour: Black

• High Quality Microphone Cable
• Profile: 2 x 0.22 mm²
• With Neutrik XLR male/female connectors
• Colour: Black
• Length: 3 m
• Made in Germany